PROVN OF BICYCLE CUM SCOOTER STAND NEAR UNIT MANDIR OF ASC SUPPLY, CHANGE OF AC SHEET WITH CGI SHEET IN BLDG NO. T-23, T-25, T-36, T-37 AND T-42 OF OMC AND TOILET BLOCK AT AEPTA NASIRABAD UNDER GE NASIRABAD.

Amount

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth for foundation and getting out in soft/disintegrated rock, complete all as specified and directed.

M & L for PCC 1:4:8 Type D2 (40 mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed.

M & L for brick work with fly ash 'B' bricks, straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or batter etc rough finished surfaces of concrete complete all as specified and directed.

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions etc. rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work: not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work for rough finished flat surfaces of concrete exc 10cm but n.exc 20cm.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per srl item No 10.00 here-in-before but 6mm to 8mm dia complete all as specified and directed.

All as per srl item ser No 10.00 here-in-before but 5mm dia and over up to and including 10mm dia as in stirrups complete all as specified and directed.

M & L for Reinforced Cement Concrete ( M-25 Design Mix ) 20mm grade aggregate as in foundations, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete complete all as specified and directed.

M & L for Reinforced Cement Concrete ( M-25 Design Mix ) 20mm grade aggregate as in columns, pillars, piers, posts and struct etc. complete all as specified and directed.

M & L for Reinforced cement concrete (M-25 Design Mix) 20mm grade aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

M & L for Reinforced cement concrete ( M-25 Design Mix ) 20mm grade aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Returning, filling in including spreading leveling, watering and wall ramming in layers not exceeding 25cm in soft /loose soil complete all as specified and directed.

Removal of surplus soil not exceeding 100 metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.

Spreading and leveling in layers not exceeding 25 cm thick each layer including watering and well ramming complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work /concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on other than fair faces of brick work /concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work /concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rough cast finish as per clause 14.22 of SSR part-I over 10 mm thick plaster in CM 1:3 on brick/stone masonry surfaces, complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified.

M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for 100 mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4, type B1 (20mm graded stone aggregate) as in flooring/apron/pavement/ hardstanding, finishing cement concrete surface even and smooth (PCC shall be laid in alternate bays in panels of size not exc 2m x 2m or as directed) using 3mm thick glass dividing strip, complete all as specified and directed.

M&L for Hard core of broken bricks of guage exc 63 mm, but not exc. 100mm, deposited spread, and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface complete all as specified or as directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L for Rendering 15 mm thick screed/ cement plaster in CM 1:3 with integral water proofing compound on RCC surfaces of roof/Brick walls finished fair and even while the concrete is green. Note : IWPC shall be measured and paid seperately.

M&L for APP membrane HMHDPE 3 Kg plain (thickness 3mm) (total weight of the finished membrane not less than 3 Kg/sqm + 5% per sqm) confirming to IS- 16540:2017 over a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacturer of density at 25˚C, 0.87-0.89 Kg/litre and viscosity 70-160 CPS, laying over the primer coat using Butane torch and sealing all joints, overlapping etc as per Annex 'D' of IS 16540:2017 complete all as specified and directed.

M & L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.60 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

Supply only integral water proofing compound.

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base. complete all as specified and as directed by the Engineer-in-Charge

M & L for PCC inter locking tiles,coloured,reflective type, conforming to IS-15658-2006 of 60mm thick , M-35 grade of approved quality,laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for providing and laying factory made kerb stone of M-25 grade cement concretein position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves ( thickness of joints except at sharp curveshall not to more than 5 mm) including making drainage opening wherever required complete, as directed by Engr-In-Charge.

Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges complete all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ 'L' or 'J' type hook complete all as specified & directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ 'L' or 'J' type hook complete all as specified & directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of approved tint over a coat of red oxide primer, all as specified & as directed.

Demolition of stone/brick masonry built in cement or cement lime mortar, complete, all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed.

All as per serial item No. 45.00 here-in-above but except stones.

Dismantling of ceiling board/lathing any thickness including frame work complete all as specified and directed.

Providing & fixing false ceiling with Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge. Make: Everest/Armstrong

M&L non skid ceramic coloured tiles 400x400x7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade the tiles over 15mm thick plaster in CM 1:6 over and including 25mm thick PCC 1:2:4 at B-0 (using 12.5mm graded stone aggregate ) complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200, 7 to 8mm thick on vertical surfaces of wall such as skirting/ dados ect set and jonted in neat cement slurry and pointed in white cement to match the shade the tiles over and including 10mm thick screed plaster on stone/brick masonry walls in CM 1:4 complete all as specified and directed.

S & F Steel ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements, 25mm aluminium knobs to shutter, MS hook & eye, 10mm MS square bars in grill, 04 Nos lugs welded to frame Z section handle 100mm inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note :Wire mesh and sheet glass shall be measured & paid separately .

S&F sheet glass , ordinary frasted quality 3mm thick fixed with oil putty size of glass n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed.

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Aluminium butt hinges medium weight cold rolled ISI marked of size 100mm complete all as specified and directed.

S&F for aluminium anodised handle 150mm long fabricated type complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt 150mm long of extruded section complete all as specified and directed.

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item No. 59.00 above but 20 mm bore.

S & F Gun-metal, globe or gate valves,20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by engr in charge.

S&F PVC floor trap with grating 75mm dia fixed with cement joint complete all as specified and directed.

S&F PVC (SWR) 110mm pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) 75mm pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC 110mm (SWR) vent cowl complete all as specified and directed.

S&F PVC 110mm(SWR) junction single,(Single T) equal or unequal provided with access door ,complete all as specified and directed.

PVC 110 mm (SWR) bends any radius PVC (SWR) bends any radius, provided with access door ,complete all as specified and directed.

PVC 75 mm (SWR) bends any radius PVC (SWR) bends any radius, provided with access door ,complete all as specified and directed.

S&F tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as sped & directed.

S&F Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

Supply and Fixing vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and as directed.

S&F PVC valveless low level fluslhing cistern 10 litre capacity with white inlet,float valve,handle including pvc 32mm bore flush pipe fixed on wall and connections to pipes and fixing of chain and pull, or lever, complete all as specified & directed.

Supply and Fixing plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

Supply and Fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Pillar taps,15mm cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified & directed.

S&F stop cock/angle cock 15 mm dia cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as spd & directed.

S&F Soap dish, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.

S&F vitreous china wash hand basin white, flat back of size 550x400mm excl taps, and plug and porcelain stopper but incl brackets, PVC waste pipe & PVC waste coupling complete all as specified and directed.

S & F PVC connection, heavy duty 15 mm bore, 60 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

S&F rotational moulded synthetic (HDPE) water storage tank 500 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F ball valves PTMT with high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore (min weight 210 gms) complete all as specified and directed.

S & F sheet glass shelf assembly consistinf of 5.5 mm thick glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as spd and directed.

M & L for rolled mild steel work angle iron as in tank plateform including welding horizontally to bottom of frame confirming to Fe-290 omplete all as specified and directed.

S&F PVC gully trap 110 mm outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as directed by engr in charge.

M & L for Concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid in PCC 1:3:6 type C-2 complete all as specified and directed.

M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories and sunk type pressed steel terminal switch box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:-

One light point controlled by one, one way switch.

One ceiling fan/exhaust / wall fan point controlled by one, one way switch through regulator.

One 3 pin 5 Amp socket on independent board.

All as per item No. 88.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 1.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F switch piano flush type 5 amps, single pole one way 240 volts.

S&F Socket outlet 3 Pin 5/6 Amp flush type.

S&F switch piano flush type 15 amps, single pole one way 240 volts.

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete.

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm.

S&F of lamp holder PVC/polycarbonate type with back plate.

S&F of LED lamp 9/11 watt suitable for 230 volts,50 Hz B-22 base complete all as specified and directed.

S&F LED tube light fitting box type in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as speciied and directed by Engr-in-Charge. Make Havells Cat part No PHOTONULTRA1213T8SSTL18WLED 865SPC (for tube) REGALBATTENT8UPTO1X22WDSBSWH (for batten)Bajaj Cat Part No BLRB 18W CWc for tube , BLRB - DB 118 for batten , or equivalent model of Philips/Crompton

S&F LED mirror light fitting 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories pre-wired and including connecting flexible copper conductor cable with suitable size. Make : Havells/Bajaj/Osram

S&F LED bulk head luminaire 1x 10 W bulk,IP65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed. Make : Havells/Bajaj/Osram

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of sweep 250 mm , complete all as approved by GE. Make: Bajaj/Havells/CG

S&F of MCB distribution board SPN 4 way double door with 200 Amps rated 415 V bus bar, neutral bar with shrouds earth bar IP-43 DB's ,made out of sheet steel enclosure ,reccessed type,factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed by Engr-in-charge.

S & F of MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-charge.

S & F of MCB SP, 240 volt, 3 Amp to 32 Amp capacity, 10 KA, 'C' curvecomplete all as specified and directed by Engr-in-charge..

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply and laying including jointing,testing, or fixing or passing through pipe, trench or duct,commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor,1100 volt grade size 10 sqmm , 2 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing tubes light grade GI Tubing 40mm dia with all fitting laid in trenches.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.

Supply and laying of bricks old class ‘B’ as protect on to UG cable laid flat adjoining to each other width wise all as specified.

M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings complete fixed to wall/floors or laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately.

All as per description of serial item no. 108.00 above but of 20mm bore pipe.

S&F 25 mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe.

Cutting existing steel tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fittings (ie union, nipple, reducing tee) for branch connection of 25/20mm bore, complete all as directed.

Surface excavation n.exc 30cm in depth and averaging 15cm deep and getting out in any type of soil Complete, all as specified & directed.

MITTAL ENTERPRISES

Sree Ram Enterprises

M/S Nexus Projects

M/s SUNIL ENTERPRISES

kirtiman traders