Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC | L1 | Accepted-AOC Due to L1 | |
| 2 | L2₹19.5 L+₹1.6 L (8.89%)Rejected-Finance | L2 | Rejected-Finance Quoted amt more than L1 | |
| 3 | L3₹19.5 L+₹1.6 L (9.07%)Rejected-Finance | L3 | Rejected-Finance Quoted amt more than L1 | |
| 4 | L4₹21.2 L+₹3.3 L (18.6%)Rejected-Finance | L4 | Rejected-Finance Quoted amt more than L1 | |
| 5 | L5₹21.5 L+₹3.6 L (20.1%)Rejected-Finance | L5 | Rejected-Finance Quoted amt more than L1 |
| Sl No | Description | Qty | Unit | M/s Dimpy Enterprises L2 | M/S SANTOSHI TRADERS L3 | M/S PAUL CONSTRUCTION L8 | M/S BARUA REFRIGERATION WORKS L6 | A M CHOUDHURY AND CO L7 | THE SUPPLY AGENCY L4 | M/S RK SAHA AND CO L9 | 4S ASSOCIATES L1 | M/S BARUAH ELECTRICALS L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.00NOTE:- (i) The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. (ii) It is highlighted that the certain condition of General Condition of Contracts (IAFW-2249) has been modified as per direction of MoD i.e. inclusssion of Performance Security, deletion of Risk & Cost Provisions and increase in defect liability period all as per tender documents. The tenderers should keep in mind while quoting their offer. (iii) (Applicable for all items/parts):- The bidders/contractors are advised to refer Notes on BOQ/SCH'A' before entry/quoting the rates. | ||||||||||||
| 1.00 | Material and labour for painting of LT electric steel tubular swaged pole (9.0 m long) of any pattern and description with two coats of aluminium paint over a coat of red oxide zinc chrome primer including preperation of steel surface (5.5 m to 7.5 m) in full length of the pole and marking the pole with black and yellow strip (upto 1 m height above PCC coping) alternatively including numbering the pole serially and white wash of coping all as specified and as directed.
Note: T&P items like Aluminium ladder/Bamboo ladder and safety belt shall be provided by the contractor. All the rates are inclusive in the quoted rate. | 665 | Each | 700 ₹4,65,500 | 775 ₹5,15,375 | 815 ₹5,41,975 | 895 ₹5,95,175 | 799 ₹5,31,335 | 845 ₹5,61,925 | 825 ₹5,48,625 | 600 ₹3,99,000 Lowest | 870 ₹5,78,550 |
| 2.00 | Material and labour for painting of LT RCC electric pole (9.0 m long) of any pattern and description with two coats of weather proof paint and marking the pole with black and yellow strip (upto 1 mtr height from ground) alternatively including numbering the pole serially and white wash of coping all as specified and as directed.
Note: T&P items like Aluminium ladder/Bamboo ladder and safety belt shall be provided by the contractor. All the rates are inclusive in the quoted rate. | 182 | Each | 500 ₹91,000 Lowest | 725 ₹1,31,950 | 805 ₹1,46,510 | 875 ₹1,59,250 | 779 ₹1,41,778 | 795 ₹1,44,690 | 805 ₹1,46,510 | 650 ₹1,18,300 | 815 ₹1,48,330 |
| 3.00 | Material and labour for two coats of Aluminium paint over a coat of red oxide zinc chrome primer including preparation of surfaces by spray painting external surfaces of steel tubular HT poles at various Sub Stations with approved colour code complete after taking shutdown specified and as directed.
Note: T&P items like Aluminium ladder/Bamboo ladder and safety belt shall be provided by the contractor. All the rates are inclusive in the quoted rate. | 48 | Each Job | 1,100 ₹52,800 | 710 ₹34,080 Lowest | 777 ₹37,296 | 825 ₹39,600 | 749 ₹35,952 | 775 ₹37,200 | 765 ₹36,720 | 710 ₹34,080 Lowest | 785 ₹37,680 |
| 4.00 | Material and labour for two coats of weather proof paint including preparation of surfaces by spray painting external surfaces of HT PCC poles at various Sub Stations with approved colour code complete after taking shutdown all as specified and as directed.
Note: T&P items like Aluminium ladder/Bamboo ladder and safety belt shall be provided by the contractor. All the rates are inclusive in the quoted rate. | 32 | Each Job | 1,000 ₹32,000 | 750 ₹24,000 Lowest | 787 ₹25,184 | 865 ₹27,680 | 769 ₹24,608 | 825 ₹26,400 | 785 ₹25,120 | 750 ₹24,000 Lowest | 845 ₹27,040 |
| 5.00 | Supply and fixing as in replacement loop in loop out SMC Junction boxes of size 300 x 200 x 100 mm made out of 1.6 mm thick SMC sheet weather proof dust and vermin proof with hinged door and locking arrangements with slanting cover on top and provision of 04 nos aluminium bus bar of size fixed on insulator and one MCB of capacity 10 Amp complete fixed on pole with and including suitable size MS flat iron clamp, nut, bolt and washers etc. complete all as specified and as directed. | 392 | Each | 2,300 ₹9,01,600 | 1,650 ₹6,46,800 Lowest | 1,750 ₹6,86,000 | 1,650 ₹6,46,800 Lowest | 1,950 ₹7,64,400 | 1,750 ₹6,86,000 | 1,945 ₹7,62,440 | 1,650 ₹6,46,800 Lowest | 1,800 ₹7,05,600 |
| 6.00 | Material and labour for HDPE pipe of pressure rating 10 kgf/cm² of 32 mm dia for passing of cable through PCC foundation from trench to cable junction box and also for protection of security light cable from junction box to light fitting with necessary clamp nuts and bolts complete all as specified and as directed. | 372 | RM | 100 ₹37,200 Lowest | 140 ₹52,080 | 220 ₹81,840 | 155 ₹57,660 | 140 ₹52,080 | 154 ₹57,288 | 165 ₹61,380 | 140 ₹52,080 | 145 ₹53,940 |
| 7.00 | Supply and fixing as in replacement of Danger notice boards/plate of size 200 mm x 150 mm x 1.6 mm thick, mild steel sheet, vitreous enamelled white with letters 440 Volt, figures and conventional skull and bones in signal red colour and fixed with and including MS clamps made out of MS Flat 25 x 3 mm, bolts and nuts of approved size for LT poles/panels complete all as specified and as directed. | 68 | Each Job | 200 ₹13,600 | 100 ₹6,800 Lowest | 185 ₹12,580 | 112 ₹7,616 | 110 ₹7,480 | 110 ₹7,480 | 115 ₹7,820 | 100 ₹6,800 Lowest | 100 ₹6,800 Lowest |
| 8.00 | Supply and fixing as in replacement of Danger notice boards/plate of size 250 mm x 200 mm x 1.6 mm thick, mild steel sheet, vitreous enamelled white with letters (1100 Volt)/11 KV, figures and conventional skull and bones in signal red colour and fixed with and including MS clamps made out of MS Flat 25 x 3 mm, bolts and nuts of approved size for HT poles / panels complete all as specified and as directed. | 38 | Each Job | 250 ₹9,500 | 150 ₹5,700 Lowest | 215 ₹8,170 | 197 ₹7,486 | 195 ₹7,410 | 165 ₹6,270 | 200 ₹7,600 | 150 ₹5,700 Lowest | 165 ₹6,270 |
| 9.00 | Supply and fixing as in replacement of LED Street Light fitting 90-95 Watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated electronic driver circuits, Low THD, PMMA grade high quality transmittance lens, epoxy powder coated die cast aluminium housing with weather proof gasket for lamp & driver compartment, heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as specified and as directed. | 15 | Each | 4,300 ₹64,500 Lowest | 8,800 ₹1,32,000 | 8,800 ₹1,32,000 | 9,750 ₹1,46,250 | 9,550 ₹1,43,250 | 8,500 ₹1,27,500 | 9,500 ₹1,42,500 | 8,500 ₹1,27,500 | 9,250 ₹1,38,750 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
10 Jun 2026, 6:00 pmClosed
GARRISON ENGINEER JORHAT
GARRISON ENGINEER JORHAT
REPAIR/ MAINT INCLUDING PAINTING OF POLE, PANEL JUNCTION BOXES AND CONNECTED ITEMS UNDER GE JORHAT
2026_MES_766741_1
8322/GE/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE JORHAT
As per NIT
7 documents required · 7 mandatory
₹50
GARRISON ENGINEER JORHAT
₹40,000
Yes
11 Aug 2026
20 May 2026
12 Jun 2026
20 May 2026
10 Jun 2026
3 Jun 2026
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tender_8322_1_CONTENT_TO_NOTE_8322.pdf
Tender Documents • 0.60 MB
Tender_8322_2_General_Condition_8322.pdf
Tender Documents • 0.78 MB
Tender_8322_3_Spl_Con_8322.pdf
Tender Documents • 0.37 MB
Tender_8322_4_PS_8322.pdf
Tender Documents • 0.51 MB
BOQ_858704.xls
BOQ • 23.94 MB
Corrigendum_Date.pdf
PDF • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .