Job 1 Construction of PHC Level-II at Village Pir-Nigah (Basoli) Distt. Una H.P. Sub Head Construction of Main building WS and SI, Septic Tank Rain Water Harvesting Tank and site development

Amount

Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Filling with available excavated earth(excluding rock) in tranches , plinth , sides of foundations etcetra in layers not exceeding 20cm.in depth, consolidating each deposited layer by ramming and watering upto any leads and lifts . The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto any leads and lifts also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in all work upto plinth level including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (one Cement : three coarse sand): six graded stone aggregate 40 mm (forty millimetre) (twenty millimetre) nominal size) as directed by Engineer-in-charge including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying cement concrete 1 : 5 : 10 ( one cement : five sand : ten graded crushed stone aggregate 40mm(forty millimetre nominal size) mechanically mixed and curing complete excluding cost of form work in all work upto plinth level including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the like including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height upto all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) size so as to give a fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaks in floors and walls etcetera upto any width /height complete upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete upto floor all level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed including curing complete excluding cost of form work and reinforced concrete work in all work upto plinth level including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in stair cases(except spiral stair case) excluding landing but including the preparing of the surface and finishing upto all heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in Walls (any thickness but not less than 0.10 metre (zero point ten meter thickness) including attached pilasters buttersses,plinth and string courses etcetera from top of foundation in all depth including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying mild steel medium tensite steel bars tor steel (Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL) make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing in RCC work smooth finishing of the exposed surface with 6mm thick cement mortor 1:3(One cement:three sand) in all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in superstructure above plinth level upto all floor level /height in all shapes and size cement mortar 1:6(one cement: six sand ) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Half brick masonry with with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in foundation and plinth bricks in cement mortor 1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Half brick masonry with common burnt clay building bricks in cement mortor 1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 35 mm(thirty five millimetre) thick Second class teak wood with ISI marked M.S. pressed butt hinges bright finished of required size wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screw complete upto all floor level entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm(twenty five millimetre) dia and brackets of first class deodar wood (actual length) of rails of be measured including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete upto all floor level Fixed to steel windows by welding including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetra complete including carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)250×16mm(two hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. i)200×10mm( two hundred into ten millimetre)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. i)100×10mm(one hundred into ten millimetre)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . (a)125mm(one hundred twenty five millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. (a)75 mm(Seventy five millimeter

Providing and fixing 50mm(fifty millimetre) bright finished brasscup board or ward robe knob including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. (a)75 mm(Seventy five millimeter

Providing and fixing 150mm (one hundred fifty millimetre) MS single acting spring hinges with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government 150mm(one hundred fifty millimetre)

Providing and fixing 205x19mm( two hundred five into ninteen millimetre) stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government 150mm(one hundred fifty millimetre)

Providing and fixing 12mm(twelve millimetre) thick pre-laminated particl board (decorative lamination on both sides)( grade-I medium density flat pressed, three layer particle board FPT-1 or graded wood particle board FPT-1 , conforming to IS: 3087, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre- laminated conforming to IS: 12823, Grade-I, Type_ II marked including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non- decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35mm (thirty five millimetre) thick including ISImarked stianless steel butt hinges with necessary screws including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing decorative high pressure laminated sheet of plain/ wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding qulaity conforming to IS: 2046 Type-S, includig cost of adhesive of approved quality 1mm(one millimetre) thick including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Extra for providing lipping with 2nd class teak wood battens 25mm(twenty five millimetre) minimum depth on all edges of flush door shutters ( over all area of door shutter to be measured) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 18mm(eighteen millimetre) (HDHMR BOTH SIDE prelaminated) thick water proof termite resistant(Box type) including shelves and back side of wall and shutters with edge bending with adhesivle in front of shutter fixing 1mm thick sunmica approved shade brand action tessa etertra including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing in wall lining medium density fibre board IS: 14587-1998 marked , Pre- laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete 12mm(twelve millimetre) thick including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and laying Full body matt finished / Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) or as directed by the Engineer-in-charge upto any floor level height with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement :four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm (six hundred into six hundred millimetre )of Kajaria,Nitco/Rak/Johnson/Orient/Somany or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Vitrified tiles double charged in different sizes (thickness to be specified by manufacturer) or as directed by the Engineer-in-charge with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete upto any floor level height Size of Tile 600x600 mm(six hundred into six hundred millimetre ) of Kajaria, Nitco/ Rak/ Johnson/ Orient/ Somany or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying matt finished vitrified tile of size 300x300x9.8mm( three hundred into three hundred into nine point eight millimetre) having with water absorption less than 0.05 % and conforming to I.S. 15622, of approved make, in all colours and shades, in for out door floors such as footpath, court yard, multi modals location etc. laid on 20mm(twenty millimetre) thick base of cement mortar 1:4 (one cement:four coarse sand), in all shapoes and patterns including grouting the joints with white cement mixed wied with matching pigments etc. complete Nitco/ Rak/ Johnson/ Orient/ Somany or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying arble stone flooring with 18mm(eighteen millimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge , over 20mm (average) thick base of cement mortor 1:4(one cement: four sand) laid and jointed with grey cement slurry , including rubbing and polishing complete 18mm( eighteen millimetre) thick makrana white marble including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 18 mm(eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels for Granite of any colour and shade. and area of slab over 0.50 sqm.including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110mm (one hundred ten millimetre) nominal size including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing unplasticised -PVC pipe clips of approved design Finolex make to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete.110mm dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A including joiting with seal ring conforming to IS: 5382, leaving 10mm(ten millimetre) gap for thermal expansion of PVC plain bend 100/150mm dia ( one hundred oblique one hundred fifty millimetre) or vectus make ncluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A including joiting with seal ring conforming to IS: 5382, leaving 10mm(ten millimetre) gap for thermal expansion of PVC shoe 100/150mm dia ( one hundred oblique one hundred fifty millimetre) or vectus make ncluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing angle iron frame single rebate manufactured from MS angle section of 50x50x6mm (fifty into fiftyy intosix millimeter)and MS flat 50x4mm(fifty into four millimeter) as per drawing and design including hinges jambs locks beeds and if required angle threshold of MS angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanical means lugs with split and tail to each jamb including steel butt hinges 2.5mm(two point five millimeter) thick with provision for locking arrangement and shocks obsorber as specified and applying a coat of approved steel primer after proper pretreatment of surfaces as directed by Engineer in charge including carriage of material with in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing steel window made of frame with M.S. Channel 75x40mm(seventy five into forty millimetre ) and San Harvic, steel man industries, PD industries, Metal window ,Chandni industries, Ganpati Udyog (Raipura) M.S. flat/plate 75x40mm (seventy five into forty millimetre ) to make one frame providing double rebate with making square steel section with mild steel flat of 20x4mm (twenty into four millimetre ) and 12x4mm (twelve into four millimetre ) shutter of Z section including glass panes of 4mm thick in glazed panels and wire gauge of designation 85 G (eighty five ) with wire of 0.56 mm(zero point fifty six millimetre ) in wire gauge pannel and fixed glazing fixed with angle and T section 25x25x3mm (twenty five into twenty five into three millimetre ) and M.S. flat of 12x4mm (twelve into four millimetre ) in sash bars duly welded of all corner and joints properly holdfast of M.S. flat 200x50x5mm (two hundred into fifty into five millimetre ) duly welded of corner and joints of all steel sections embeded in CC block 1:3:6 ( one cement : three sand : six graded stone aggregate ), 100x100x100mm ( one hundred into one hundred into one hundred millimetre ) size including fittings such as handles tower bolts hooks and eyes and applying a coat of red lead paiant and fixing in position complete as per architectural drawings including carriage of material with in all leads and lifts and other incidentals. The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Painting steel work with deluxe multi surface paint system for interiors and exterior using Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Finishing with Deluxe multi surface paint, system for interiors and exteriors using primer as per manufacture specifications wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

6mm (six millimetre) on cement plaster concrete or reinforced cement concrete work with white cement based polymer modified self curing mortor of approved make as per direction of Engineer-in-charge complete upto all floor level/any height .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

15mm (fifteen millimetre)cement plaster in single coat on rough/ fair side of brick/concrete/stone walls for interior plastering in all floor level/any height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 ( one cement : four sand) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

20 mm(twenty millimetre ) thick cement plaster in single coat on the brick/ concrete / stone walls for interior plastering in all floor level/any height including arrises , internal rounded angles, chamfers and rounded angles not exceeding 80mm (eighty millimetre ) in girth and finished even and smooth and curing complete in cement mortar 1:4 (one cement four sand )including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

20 mm(twenty millimetre ) thick cement plaster in single coat on fair side of brick concrete / stone walls for interior plastering in all floor level including arrises , internal rounded angles, chamfers and rounded angles not exceeding 80mm (eighty millimetre ) in girth and finished even and smooth and curing complete in cement mortar 1:4 (one cement four sand )including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Distempering with dry distemper of approved brand of (Neolac/Assian/Dulux/Berger) and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat withcement primer including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and applying white cement(Birla white/JK) wall putty based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level /any height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Distempering with oil bound washable distemper of approved brandof(Neolac/Assian/Dulux/Berger) Jenson and Nicholson (J&N) Golden Paints Aqualac make and manufacture to give an even shade New work (two or more coats) over and including water thinable priming coat with cement primer complete upto all floor level /any height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Finishing walls wany height Acrylic Smooth exterior paint of (Neolac/Assian/Dulux/Berger) Jenson and Nicholson (J&N) GFolden Paint Aqualac make required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Making plinth any height protection 50mm (fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm nominal size) over 75mm (seventy five millimetre)thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and laying 60mm(sixty millimetre) thick factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge cement concrete paver block of M-35 grade with approved colour, design &patternof NTC make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following opertions with average thickness of 120mm(one hundred twenty millimetre) and minimum thickness at khurra as 65mm (sixty five millimetre)including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing Cool tiles 10mm(ten millimetre) thick on terrace having size 300x300 and landing laid on a bed of 12mm(twelve millimetre) thick cement mortor 1:3(onecement: three sand) finishe with 3mm(three millimetre) spacer and filled the joint with araldite standard epoxy adhesive of approved quality in any floor level the tiles are solar reflective index value 103 ncluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing Cool tiles 10mm(ten millimetre) thick in skirting risers of steps having size 300x300 and landing laid on a bed of 12mm(twelve millimetre) thick cement mortor 1:3(onecement: three sand) finishe with 3mm(three millimetre) spacer and filled the joint with araldite standard epoxy adhesive of approved quality in any floor level the tiles are solar reflective index value 103 ncluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing soil, waste and vent pipes 75mm(seventy five millimetre) dia centrifugally cast (spun) iron socket and spigot (S&S) pipe as per IS: 3989 including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing soil, waste and vent pipes 100mm(One hundred millimetre) dia centrifugally cast (spun) iron socket and spigot (S&S) pipe as per IS: 3989 including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing in cast iron cover with frame for man holes 60cmx45cm(sixty centimetres into forty five centimetres) light duty weight not less than 50kg.(fifty kilogramme) including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing M.S. foot rests including fixing in manholes with 20x20x10cm.(twenty into twenty into ten centietres) cement concrete blocks 1:3:6(1cemet:three coarse sand: six graded stone aggregate 20mm nominal size) as per standard design with 20x20mm(twenty into twenty millimetre) square bar including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing plain bend of required degree 75mm (seventy five millimetre) dia sand cast iron S and S as per IS: 1729 including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Plain bend 110mm dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain) 110mm dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 16mm size(sixteen millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 20mm( twenty millimetre) brass full way valve with wheel (Zindal/Tata or its equivalentincluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.1216(16mm OD) Pipe including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.1620(20mm OD) Pipe including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 mPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (three hundred millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and laying cement concrete 1:5:10(one cement:five sand: ten graded stone aggregate 40mm(forty millimeter) nominal size for surround or encasing PVC pipes 100mm(One hundred millimeter) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 3 HP Pump(Tullu pump) Croption with all other required accessories for supply of water upto tank over slab including entire carriage of material with in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PE-AL-PE- composite pressure pipes as per IS- 15450-2004 for hot water supply with jointing testing and fixing including cutting and making good the walls etc.(This type of fitting to be used for hot water supply only) i) 1216 mm (16 mm O.D. pipe) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PE-AL-PE- composite pressure pipes as per IS- 15450-2004 for hot water supply with jointing testing and fixing including cutting and making good the walls etc.(This type of fitting to be used for hot water supply only) i) 1620 mm (20 mm O.D. pipe) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PE-AL-PE- composite pressure pipes as per IS- 15450-2004 for hot water supply with jointing testing and fixing including cutting and making good the walls etc.(This type of fitting to be used for hot water supply only) i) 2025 mm (25 mm O.D. pipe) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PVC water storage tank of 12701 ISI marked of approved brand and make (Sintex with 3 layer equipment ISI make with 40mm (forty milimeter) nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimeter) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimeter) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height ground level 1000 litres (one thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm( fifteen millimetre) dia G.I. Pipes of Taka make complete with G.I. fittings and clamps,including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete 110mm(One hundred ten millimetre ) dia of Supreme / Kisan/finolex or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete 75mm(seventy five millimetre ) dia of Supreme / Kisan/finolex or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC plain bend ISI marked make of Finolex including fixing with approved adhesive etc. complete 110mm(one hundred ten millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PVC plain bend ISI marked make of Finolex including fixing with approved adhesive etc. complete 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PVC collars ISI marked Finolex make including fixing with approved adhesive etc. Complete 110mm(one hundred ten millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PVC floor trap Finolex make of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetera complete 110mmx75mm(one hundred ten into seventy five millimeter) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous China wash basin with single hole for pillar tap with CP or M.S. brackets painted white including cutting holes and making good the same but excluding fittings flat back Wash basin No. 10010 size 630mmx450mm(Six hundred thirty millimetre into four hundred fifty millimetre) in white shade of Cera hindware Parryware sanitary ware, Neycer or its equivalent make including carriage of material with in all leads and lifts and other incidentals

Providing and fixing PTMT ZET spray make of Viking, Prayag of approved quality and colour with 1.50 meter)one point fifty metre) tube make of Prayag including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PTMT coloured/white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm(forty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in white shade of Cera Parry ware Hindware Sanitary ware Neycer complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink AMC,Unik,Diamond, Neelkanth with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting 510 x 1040 mm (Five hundred ten into ten thousand forty millimeter) with bowl depth 200 mm(Two hundred seventy eight millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 31mm (thirty one millimeter) dia PTMT waste (heavy duty make of Kingston, Gem, Parko, Techno , Jal, Jaquor for wash basin or sink in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 32mm dia Kingston, Gem, Parko, Techno , Jal, C.P. Brass bottal Trap for wash basin and sink including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 100 mm (one hundred millimeter) dia chromium plated grating make of Kingston, Gem, Parko, Techno , Jal, Jaguar superior quality for floor, gully or nahani trap in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 32mm (thirty two millimeter) G.I./M.I Union make of Link, KS, AMCO, AVR, NBR, RR, SUW (where not included in the items) in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of Atul, Modi Guard, Golden Fish make including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 20mm (six hundred millimeter into twenty millimeter) Towel rail (heavy duty make of kitech IS: 8931 and 8934) complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing chromium plated brass soap dish make of Kingston, Gem, Parko, Techno , Jal, Jaquor with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PTMT bib cock make of Paryag Viking and colour fancy 15 mm (fifteen millimeter) with flange in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing C.P. brass pillar tap with capstan head 15mm dia Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 15mm(fifteen millimetre) Mixer for Kitchen sink with casted swinging spout at top Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seikoincluding carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen muillimeter)PTMT angle cock make of Viking, Prayag of approved quality and colour with flange including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing CP connection with brass union 45cms.(forty five centimeter) Length 15mm nominal bore (fifteen millimeters) Finolex make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mmx120mm(six hundred into one hundred twenty millieter) glass shelf with CP brass brackets and guard rail fixed to wooden plugs with CP brass screw of Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (One cement: Five sand ) C.I. Cover with frame (light duty) 455x610mm (Four hundred fifty five into Six hundred ten milimetres) internal dimensions total weight cover with frame to be not less than 38 Kg weight of cover 23 Kgs and weight of frame 15 Kgs RCC top slab with 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres)foundation concrete 1:5:10: (One cement : Five sand : Ten graded crushed/ broken stone aggregate 40mm nominal size inside plastering 15mm(Fifteen milimetres) thick with cement mortar 1:3 (One cement : Three sand )finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455x610mm(Four hundred fifty five into Six hundred ten milimetres) and 450mm(Flour hundred fifty milimetres) deep single pipe line. including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kgWith common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing CP brass shower rose with 15 ot 20mm inlet and 150mm dia Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

shiv kumar kapila

Ravinder Kumar

Harpal Singh