TANK UPGRADATION WORKS -HPCL CHENNAI NEW TERMINAL

EXCAVATION — per scope of work

PCC 1:3:6 — FER DETAILED DISCRIPTION AS PER THE ATTACHEDTENDER BOQ

RCC M 25 — OVIDING & LAYING CONTROLLED M-25 REINFORCEDCEMENT CONCRETE USING, 20MM & DOWN SIZE STONEAGGREGATES WITH PPC (PORTLAND POZOLANA C ENT) ATALL LEVELS IN FOOTINGS AND RAFT INCLUDINGPROVIDING, FABRICATING AND ERECTING FORM WORK OFSTEEL/PLY CONFORMING TO IS 499 AT ALL LEVELS,HEIGHTS AND PLACES WHEREVER NEEDED/ SPECIFIEDWITH ADEQUATE ADJUSTABLE STEEL PROPS ANDSUFFICIENT BRACINGS AS PER PROVED DRAWINGINCLUDING STRIKING/ DE-SHUTTERING. COST TOINCLUDE SEALING THE JOINTS WITH HEAVY DUTY BROWNSELF-ADHESIVE TAPE, AP YING MOULD RELEASINGAGENTS( REBOL FROM FOSROC OR EQUIVALENT) ALIGNINGTO LINE AND LEVELS INCLUDING M.S. TIES, PVCSPACER, ETC., R FOOTINGS & RAFT - M25. THISITEM IS WITH SITE BATCHING AND WILL BE USEDWHEREVER IT IS NOT POSSIBLE TO USE RMC. MINIMUMTWO SET OF SHUTTERING MATERIAL FOR SLAB SHALLBE ARRANGED BY CONTRACTOR SO THAT EACH ROOF SLABCAN BE CAST WITHIN 20 DAYS WITHOUT DE-SHUT RINGPREVIOUS SLAB.

PROVIDING BRICK WORK — FER DETAILED DISCRIPTION AS PER THE ATTACHEDTENDER BOQ

SUP & APLY — MM THICK INTERNAL PLASTERING: PROVIDING ANDDOING 15 MM THICK CEMENT PLASTER IN CEMENT MORTAR1:4 MIX FINISHED WITH CEMENT FLOAT NISH AS PERSPECIFICATION TO ALL REINFORCED CEMENT CONCRETEAND MASONRY WORK AT ALL LEVELS AND LOCATIONSINCLUDING GROOVES, PATTA DRIP MOULDING,SCAFFOLDING, WATERING, HACKING OUT JOINTS INMASONRY OR CONCRETE WORK AS PER SPECIFICATION.THE RATE TO INCLUDE P VIDING AND FIXING OF 200MM WIDE CHICKEN WIRE MESH OF 26 G AND 15 MM MESHSIZE AT THE JUNCTION OF DIFFERENT CONSTRUCTIONMATERIAL ALL COMPLETE AS PER INSTRUCTIONS OFHINDUSTAN PETROLEUM CORPORATION LIMITEDENGINEER-IN-CHARGE.

SPLY AND FIXG OF INSERT — OVIDING, FABRICATING AND FIXING EMBEDDED INSERTPLATES, ANCHOR BOLT, INSERT/CORNERANGLES/CHANNELS, PIPE SLEEVES ALONG WITHLUGS/ LD FAST INCLUDING PAINTING AS PER PAINTINGSPECIFICATIONS FOR STEEL STRUCTURES.PLATE/ANGLE/CHANNELS SHALL BE CONFORMING TO IS20 . LUGS SHALL BE MILD STEEL ROUNDS CONFORMINGTO IS 2062 AND IS 432 GRADE 1. INSERT/ANCHORBOLT-PROVIDING, FABRICATING AND FIXING I POSITION AT REQUIRED LOCATIONS TO CORRECT LINESAND LEVELS, ANGLES, INSERTS, PIPE SLEEVES, ANCHORBOLTS FOR COLUMNS, BEAMS, FLOOR MACHINEFOUNDATIONS, CABLE TRENCHES AND ALL TYPES OF CC,PCC AND MASONRY INCL. NECESSARY WELDING,MACHINING, GRINDING, THREADING TC. RATE SHALLINCLUDE PROVIDING, MAKING AND POSITIONINGTEMPLATES. (ALL MATERIALS AND ACCESSORIESREQUIRED SHALL BE PROVIDED BY NTRACTOR).

SUP & LAY - PAVER — OVIDING AND LAYING OF INTERLOCKING CONCRETEPAVER BLOCKS OF M50 GRADE OF THICKNESS MINIMUM100 MM FOR DRIVEWAY/ROADWAY WITH SAND B DINGMINIMUM 50 MM THICK ETC. COMPLETE IN PROPER SLOPEN DESIGN AFTER PROPER SURFACE PREPARATIONINCLUDING COMPACTION OF THE SURF E BEFORE LAYINGTHE SAND BED WITH ROLLER

SUP & GROUNDING - GI — PPLYING AND GROUNDING OF EQUIPMENT WITHGALVANIZED IRON FLAT 50 X 6 MM AND CONNECTINGEQUIPMENT TO THE EARTH MAT/GROUND PIT. EACH INTOF EARTHING WITH ALL FORMATION WORKS LIKEBENDING, TWISTING, DRILLING OF HOLES ANDCONNECTING BY WELDING (INCLUSIVE OF TANDP DCONSUMABLES) TO THE EARTH MAT/GROUND PIT/POINT OFEARTH CONNECTION ALL COMPLETE AS PER STANDARDDESIGN, SPECIFICATIONS AND DIRE ION OFENGINEER-IN-CHARGE.

DISMANTLING OF BRICK — TAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT

DISMANTLING OF PCC — SMANTLING OF PCC, CIVIL STRUCTURAL, CIVIL,REFER DETAILED DESCRIPTION AS PER THE ATTACHEDTENDER BOQ.