REPAIR PAINTING TO CERTAIN STEEL FURNITURE AT CME UNDER GE CME KHADKI

Amount

A) Removal of the following existing unserviceable steel components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part intact and painting the disturbed portion, as applicable as per drawings. B) Work will be executed where the furniture exist in different user Units/ Faculty/ Md Accn under the AOR of GE (CME) Khadki including BSO's Furniture Yard of GE (CME) as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL (FD-1031 or similar):

3-Way locking system as per drg

Lock as per drg.

Handle as per drg.

Leg as per drg

Shelf as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting and applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting and applying putty and refixing by replacing unserviceable clips/rivets.

M&L for painting to almirah large internally and externally with synthetic enamel paint of existing colour after preparation of surfaces including denting, grinding, emery and applying putty.

ALMIRAH STEEL MEDIUM {FD-67(M)/243/350/1032}:

3-Way locking system as per drg

Lock as per drg.

Handle as per drg.

Leg as per drg

Shelf as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting and applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

M&L for painting to almirah medium internally and externally with synthetic enamel paint of existing colour after preparation of surfaces including denting, grinding, emery and applying putty.

LOCKER BED SIDE STEEL (FD- 257/1029):

Aluminum hasp and staple as specified in drg and approved by the Engineer-in-Charge.

CP steel conduit pipe 16mm dia 22 gauge including removal of old existing unserviceable hanging conduit pipe.

Handle as per drg.

Foot rest (Leg) made out of 1mm thick sheet as specified in Drg.

M&L for painting internally and externally with one coat of existing paint colour of synthetic enamel paint as approved by Engineer-in-Charge after preparation of surfaces including denting, grinding, emery and applying putty.

BED HARD {FD/E6MAP/08R}:

12mm thick BWR grade plywood (Make Archid/Century/Greenply or equivalent) placed in position fitted with 30/35mm long nut bolts and wahers as shown in drg.

18/19mm thick prelaminated MDF board (Make : Greenply/Archidply/Century or equivalent) placed in position for headrest by providing 2mm thick machine pressed PVC edging of Make- Rehau/Pegasus/Kynex or equivalent shall be fixed on sides with strong bonded chemical adhesive complete alround the edges and duly fitted with screws as shown in drg.

18/19mm thick prelaminated MDF board (Make : Greenply/Archidply/Century or equivalent) placed in position for footrest by providing 2mm thick machine pressed PVC edging of Make- Rehau/Pegasus/Kynex or equivalent shall be fixed on sides with strong bonded chemical adhesive complete alround the edges and duly fitted with screws as shown in drg.

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

M&L for painting to bed hard steel of all steel surfaces with synthetic enamel paint of existing colour after preparation of surfaces inluding grinding, emery and applying putty.

CHARPOY IP HARD TOP (FD/MAP-II/01):

12mm thick BWR grade plywood (Make Archid/Century/Greenply or equivalent) by fixing with specific nut, bolts and washers as shown in drg.

25mmx25mmx16mm stiffeners of MS tube.

32mmx32mm rubber shoes as pr drg.

M&L of one coat of synthetic enamel paint of existing colour on all steel portion of charpoy after grinding, emery and applying metal putty wherever necessary all as specified and directed.

CHARPOY FOLDING IP (FD-388):

Ply of 8/9mm BWR grade plywood (Make Archid/Century/Greenply or equivalent) placed in position by necessary drilling and duly tightening with nut and bolts as shown in drg.

25mmx6mm flat iron stay as shown in drg.

Rubber shoes 25mm dia of high quality placed in position as shown in drg.

M&L of one coat of synthetic enamel paint of existing colour on all steel portion of charpoy after grinding, emery and applying metal putty wherever necessary all as specified and directed.

BOOK CASE STEEL (FD-1028):

1mm thick front frame as per size shown in drg.

3mm thick plain glass of size 660mm x 260mm and fitted inside frame as shown in drg.

2 way lock as shown in drg.

100mm long steel handles as shown in drg.

M&L of one coat of synthetic enamel paint of existing colour on all steel portion after grinding, emery and applying metal putty wherever necessary all as specified and directed.

TABLE DINING ORs (FD-165):

S&F in repair table top of size 1900mmx685mm made of 18mm thick of BWR grade plywood over which 1mm thick aluminum sheet shall be fixed with proper workmanship by folding the sheets along the edges.

Legs of 25mm square tube of MS 1.6mm thick and 760mm long by continuous welding to Table Dining OR's all as per drawing, complete all as specified and directed by Engr-in-Charge.

Centre bottom stiffener of 25mm square tube of MS 1.6mm thick and 1360mm long by continuous welding to Table Dining OR's all as per drawing, complete all as specified and directed by Engr-n-Charge.

Centre stiffener width wise of 25mm square tube of MS 1.6mm thick and 470mm long by continuous welding to Table Dining OR's all as per drawing, complete all as specified and directed.

Rubber shoes 25mm square as per drg

M&L for painting to table in all steel surface with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TABLE 900X900X760 Steel (FD-1009 or Similar):

Table top of size 900mmx900mm made of 18mm thick prelaminated particle board including polished 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

M&L for painting to table internally and externally with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TABLE 900X600X760MM WITH DRAWERS (FD-1008):

Table top of size 900mmx600mm made of 18mm thick prelaminated Particle board including polished 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Drawer all as per drg.

M&L for Painting to table internally and externally with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery, applying putty.

TABLE OFFICE CLERK STEEL (FD-84, 381, 1004 or similar):

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.

Drawer complete including handle all as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Table top of size 1200mmx600mm made of 18mm thick prelaminated Particle board including polished 4mm thick teak wood edging alround all as per drg

M&L for painting to table internally and externally complete with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TABLE OFFICE OFFICER STEEL (FD-1003 or similar):

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg

Drawer of table duly painted as per drg

Stiffeners as per drg

Shoes all as per drg

Table top of size 1370mmx760mm made of 18mm thick prelaminated Particle board including polished 4mm thick teak wood edging alround all as per drg

M&L for painting to table of all steel surfaces with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TEAPOY VERANDAH (FD-255/383):

18/19 mm thick prelaminated particle board of size 900mmx450mm placed in position at top with 4mm thick teak wood edging alround the edges of the top and fitted with screws as shown in drg.

25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

Rubber shoes 18mm square of high quality placed in position as shown in drg.

M&L for painting to teapoy verandha of all steel surfaces with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty wherever necessary all as specified and directed.

TEAPOY VERANDAH MAP (FD/E6/MAP/17):

18/19 mm thick prelaminated particle board of size 750mmx450mm placed in position at top and fitted with screws with 4mm thick teak wood edging alround the edges of the top as shown in drg.

18mm Square MS pipe for legs of teapoy of 522 mm length welded to adjacent part as shown in drg.

5mm dia MS bars at base tray with proper welding with frame of tray as shown in drg.

Rubber shoes 18mm square of high quality placed in position as shown in drg.

M&L of one coat of synthetic enamel paint of existing colour on all steel portion after grinding, emery and applying metal putty wherever necessary all as specified and directed.

RACK SIX TIERS STEEL (FD-1038 or similar):

Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Side to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

M&L of one coat of synthetic paint of existing colour on all steel portion of rack complete after preparation of surfaces including grinding, emery and applying putty all as specified and directed

CHAIR TUBULAR STEEL Type 'A' WITH ARMS {FD-75(M)}:

M&L of one coat of synthetic paint of existing colour on all steel portion complete after preparation of surfaces including grinding, emery and applying putty all as specified and directed.

S&F 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat alongwith supply and fixing new seat made of teak wood duly painted in black colour/shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm.

Back made of teak wood duly painted in black colour/shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Arm rest made of teak wood duly painted in black colour as per drg.

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

CHAIR TUBULAR STEEL Type 'B' WITHOUT ARMS {FD-75(M)}:

M&L of one coat of synthetic paint of existing colour on all steel portion complete after preparation of surfaces including grinding, emery and applying putty all as specified and directed.

S&F 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly painted in black colour/shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Back made of teak wood duly painted in black colour/shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

DESK STUDENT STEEL (FD-107 or similar):

Pre laminated particle board of top, bottom and back along with both sides of desk student steel with 4 mm thick teak wood beading all round duly french polished and with suitable screw as in original to fix or as directed by Engr-in-Charge.

PVC shoes for Desk Student steel.

M&L for painting to steel surface of the desk complete with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery, applying putty all as specified and directed.

TABLE 900X600X760MM Steel (FD-1007 or similar):

Table top of size 900mmx600mm made of 18mm thick prelaminated Particle board including polished 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

M&L for painting to table internally and externally with synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery, applying putty all as specified and directed.

Chair verandha (FD-359 or similar):

Removing unserviceable cane plastic from chair verandah recaning with 4mm wide semi circular approved quality mat pattern caning all as specified and directed.

PVC shoes for chair verandha.

M&L for white synthetic enamel paint to all parts of frame after scratching of old painted surface of chair verandah.

Charpoy GI Pipe ply top (FD-220):

Ply wood from Charpoy GI ply top 32 mm, tightening each part of the entire frame of charpoy (i.e long rail, short rail, legs, elbow, check nut etc) by using pipe wrench whether loose or dismantled. Supply and fixing new 12 mm thick BWR Grade plywood (Make Archid/Century/Greenply or equivalent) of ISI marked with new GI carriage bolt, nut and washers of size 6mm dia 62 to 65mm long or as directed by GE/Engr-in-Charge.

Elbow GI 32mm dia 3 way medium grade ISI marked all as specified and as shown on drawing

Long rail of 32mm dia medium grade GI pipe in lieu, duly threaded at both ends, confirming to IS, all as specified and shown on drawing.

Cutting and threading of old existing damaged long rail of the GI charpoy retreived from sl no-22.03 above, and converted into short rail and fixing in the charpoy GI Pipe, all as specified and shown in drgs or as directed by Engr-in-Charge.

Cutting and threading of old unserviceable short rail of the GI charpoy retreived from sl no-22.04 above, and converted into legs of size 440mm long, incl FMN set arrangement/ clamps duly welded along with fixing of 3 mm thick MS sheet at bottom of legs. All as specified and shown in drgs or as directed by Engr-in-Charge.

GI check nut 32mm dia medium grade of ISI marked all as specified and shown in drgs or as directed by Engr-in-Charge.

Angle iron 25x25x05mm two numbers shall be provided in equidistant of long rail by means of continuous welding at top of long rail to fix plywood without leaving gap. Angle iron shall have proper hole to fix plywood as directed by Engineer-in-Charge.

Flat iron 25x4 mm cleat of length 60mm shall be made to shape and fixed through continuous welding to each long rail – 2 Nos and each short rail – 2 Nos in equidistant. cleat shall have proper hole to fix plywood, as directed by Engineer-in-Charge.

M&L for all steel sections shall be painted with one coats of synthetic enamel paint of silver grey colour after preparation of surface as directed by Engr-in-Charge.

M&L for spot gas welding to the broken parts/joints of MS Frame, Base plate etc as required to make in serviceable condition complete all as specified & directed.

M/s National Traders (BID ID -3472783)

M/s REETA ENTERPRISES (BID ID -3471583)

M/s Green Leaf Electricals (BID ID -3478116)

Bidder Name

M/s National Traders

Mahesh Traders

M/s Green Leaf Electricals

M/s REETA ENTERPRISES