Face lifting/up-gradation of Toilet Block at fruit and vegetable market Kathua

Amount

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) to IS: 7231,with all fittings and fixtures complete: 10 liter capacity -white.

Providing and fixing upplasticized PVC connection pipe with brass unions,45 cm length and 15 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geuser points of approved make conforming to IS : 8931

Providing and fixing white vitreous china water closet squating pan ( Indian type): Long pattern W.C. pan of size 580 mm

Providing and fixing white vitreous china pedestal type (European type) /wash down type) water closet pan.

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe (32 mm dia)

Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers compete.

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rail plungs, etc. complete.

Providing and fixing wash basin with C.I. brackets, 15mm CP, brass pillar tap, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wall wherever required: White vitreous china wash basin size 550x400 mmwith a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 100 mm dia CP gratings conforming to IS standards and approved by Engineer-in-charge.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved make conforming to IS standards and weighing not less than 810 gms

Providing and fixing PTMT soap dish holder having length of 138mm. Breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezpidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concelaed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arragements of approved quality and colour.450 mm long towel rail with total length of 495 mm , 78mm wide and effective height of 88 mm weighing not less than 170 gms .

Providing and fixing 100mm dia heavy duty PVC P - trap conforming to IS standards and approved by Engineer-in-charge.

Providing and fixing 100mm dia heavy duty PVC bend of reuired degree conforming to IS standards and approved by Engineer-in-charge.

Providing and fixing Chlorinated polyvinyl chloride ( CPVC) pipes, having thermal stablity for hot and cold water supply, including all CPVC plain and brass threaded fittingsm This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work with 20 mm nominal outer dia pipes.

Providing and fixing of 1 HP water booster pump conforming to IS Standards and approved by Engineer-in-charge including all accessories and fittings complete job.

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour; Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Dismentling of old damaged Sanitary itmes including stacking of useful material near site and disposal of unserviceable marerials within 50 mtr lead.

W.C ( Indian)

P- Trap

Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay ( non modular) bricks.

Making chases up to 7.5 x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.

Providing and laying glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cemnet : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. In colour such as white , Ivory, Grey, Fume Red Brown.

Providing and laying Ist quality ceramic glazed floor tiles (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, in all colours, shades except burgundy , bottle green , bloack of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1: 3 ( 1 cemnet : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc. complete.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

20mm cement plaster of mix: 1:4 ( 1 cement : 4 coarse sand)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm).

Repair of aluminium doors /ventilators in the Toilet Block (06 Nos of doors and 06 no. of ventilators) by way of engagement of fitters /helpers including minor fittings.Complete job.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipe conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

75 mm diameter

110 mm diameer

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R. C.C. top slab with 1: 1.5:3 mix ( 1 cement : 1.5 coarse sand ( zone-III) : 3 graded stone aggregate 20 mm nominal size). Foundation concrete 1:4: 8 mix ( 1 cement : 4 coarse sand ( zone -III ) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cment concrete 1: 2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame ( light duty ) 455x610 mm internal dimension, total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

Resotration of sewerage system by way of cleaning of septic tank .

M/S DEEPAK KUMAR GUPTA

M/S LOVE SINGH

MANOHAR LAL GOVT CONTRACTOR

M/S NARESH KUMAR

kiran kumar