AR MO to various Non residential building under Shimla Division No.III SH Providing Aluminium Pratation walls in room No.509 G13 room, Making wooden tables in room No.509 602 and other miscellaneous work in HPPWD Head office Building)

Providing and fixing6 mm thick Kit ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts.

Providing and fixing 19mm thick commercial board ISI mark in shelve / box for cupboard with butt joints and fixing with nails and screw etc complete including carriage of material within all lead and lift as per direction of engineer in charge.

Providing and fixing 19mm thick commercial board ISI mark in Shutter for cupboard etc. including fixing with nickel plated piano Hinges with screw etc complete including carriage of material within all lead and lift as per direction of engineer in charge.

Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts.

Providing and fixing plain square edged cover fillets (beading) 19mm X 6mm section including mitring at junction with wooden screws /nails etc. complete in hard wood including carriage of materials within all leads and lifts.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)

Providing and fixing ACP sheet 3mm thick panel in linning on aluminum frame work etc. complete as per the architectural drawings and the directions of Engineer-In-charge including carriage of materials within all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic With float glass panes of 5 mm thickness

Providing and fixing handles ESS ESS, ISI marked, \with necessary screws etc. complete. 125 mm including carriage of materials within all leads and lifts. 200 mm

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing powder coated telescopic drawer channels 450 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing 65X35 mm special quality chromomum plated brass cup board lock with Six leaver including necessary screws etc.complete (Indian make

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 250 mm long with SS screws etc .complete as per direction of Engineer-in Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work including carriage of materials in all leads and lifts in foundation and plinth.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations cement mortar 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

Providing and fixing 3mm thick Polycarbonate sheet plain lining with necessary screws/nuts & bolts/ nails, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

providing and fixing door closer of superior quality as approved by Engineer-in-charge including carriage of materials within all leads and lifts

Providing and Fixing of Centeral Hole Basin Mixer Nova/ Benson Gold Complete of approved brand including carriage of materials within all leads and lifts

Providing and supplying of health faucet of specified quality as approved by Engineer-in-charge including carriage of materials within all leads and lifts

Providing and fixing Bib cock ESS ESS make cat no T-103 d including carriage of materials within all leads and lifts

Providing and fixing table glass 8mm thick of superior quality including carriage of materials within all leads and lifts

Providing and supplying of Sink Mixer of Ess Ess Catalogue No:-P-127 specified quality to Nabha residential colony for day to day maintenance to be done thorugh departmental labour including carriage within all leads and lifts