Repairs to flooring, brickwork, drainage, culverts, hardstanding and certain misc works at Mil Stn Bhusawal under GE (South) Ahmednagar

Amount

Demolition of brick work or stone / boulder masonary, built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for complete all as specified and as directed.

Dismantling asbestos cement (corrugated, Semi-corrugated etc.) sheets in roof coverings all as specified and as directed.

Dismantling of stone slab and tiles of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Demolition and breaking up drain pipes, 300mm dia of any description complete all as specified and as directed.

M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregates as in coping, apex stones etc and like with rounded or chamfered angles including necessary formwork if any as required complete all as specified and as directed.

M&L for reinforced cement concrete, 1:2:4 type B1 using 20mm graded stone aggregate walls, retaining walls, drain, ballast walls etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel, 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed

M&L for reinforced cement concrete,1:2:4 type B1 (using 20mm graded stone aggregates) as in cover slabs etc with and including necessary form work etc complete all as specified and as directed.

M&L for precast reinforced cement concrete,1:2:4 type B1 (using 20mm graded stone aggregates) as in drain cover/ culvert slab etc including necessary moulds, form work etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean redius, built in cement mortar 1:4 complete all as specified and as directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or batter for rough finished surfaces all as specified and as directed.

S&F in repairs, harrison curtain rails, 20mm dia, mild steel, plastic coated, fancy type, fixing with and including brackets, stops etc complete wooden or PVC plug all as specified and as directed.

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars, 5mm dia and over upto and including 10mm dia as stirrups and spacers, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or rivetted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, wall cladding, fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and as directed.

M&L for 6mm thick asbestos cement, two piece serrated ridge for corrugated or semi corrugated sheets fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and as directed.

M&L for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed. Note : Colour and design as approved by GE

M&L for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ridges/valley gutters/cladding to wall, fixed with self tapping screws as specified and as directed Note : Colour and design as approved by GE

M&L for 75mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregates) as in sub-base, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 75 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregate) as in floor, laid in panels, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregate) as in floor, laid in panels, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick as in cooking platform etc including cutting chases in brick wall and fixing the slab in cement mortar including rubbing and polishing complete all as specified and as directed.

M&L for 18 to 20mm thick prepolished granite stone slabs of approved shade as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edge, laid over and including screed bed 15mm thick in cement mortar 1:4, jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, shade as approved by GE, as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for glazed coloured ceramic tiles, 350 x 250 x 7mm thick / 450 x 350 x 7mm thick (plain or printed), shade as approved by GE, as on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles ,10 mm thick (square / rectangular), area of each tile n exc 0.36 sqm, shade as approved by GE in floor etc laid over and including 20 mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed.

All as per serial item No 36 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for precast cement concrete tiles with glossy finish of size 20cm x 20cm x 25mm thick, machine pressed with with mixture of white and grey cement in equal proportion and no pigment, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

M&L for 10mm thick anti skid outdoor paving tiles (designer type) set, jointed in neat cement slurry and pointed in coloured cement to match with and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and complete all as specified and as directed.

M&L for 60mm thick, M-35 grade, precast cement concrete interlocking tiles (glossy / rubber matt finish), hydraulically pressed, cemented tiles of grey colour with pigments as in floor laid over and including 25mm thick sand cushion and including filling of interstices with fine sand complete all as specified and as directed. Note- Size, shape and pattern shall be as approved by GE.

M&L for 80mm thick, M-40 grade, precast cement concrete interlocking tiles (glossy / rubber matt finish), hydraulically pressed, cemented tiles of grey colour with pigments as in floor laid over and including 25mm thick sand cushion and including filling of interstices with fine sand complete all as specified and as directed. Note- Size, shape and pattern shall be as approved by GE.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces, in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered surfaces or previously untreated surfaces of walls and applying two coats of cement base paint over one coat of primer all as specified and as directed.

M&L for RCC drain pipes, 300 mm bore, class NP-2 laid and jointed complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm grade stone aggregate) as in concrete bed to drain pipes including packing under and hunching against the sides of pipes after they are laid & tested for 300mm bore concrete pipes complete all as specified and as directed.

S&F UPVC pipes, 100mm bore, as in weep holes drains/boundary wall etc in any lengh complete all as specified and directed.

CHAUDHARY AND ASSOCIATES

Bhirud Electric Stores

sonu enterprises