Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | l2₹48.6 L+₹54,456.70 (1.13%)Rejected-Finance BEHIND POWER HOUSE WARD NO 6 UDASAR BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | l2 | Rejected-Finance not being lowest bidder |
Tender Value
₹44.2 L
EMD Value
₹88,440
Closing Date
6 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAL
GE AF NAL
AS DESCRIBED IN BILL OF QUANTITIES
2023_MES_613182_1
GE (AF) NAL/T-48/2023-24
Open Tender
Civil Works
Item Rate
273 days
GE AF NAL
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE AF NAL
₹88,440
Yes
20 Nov 2023
10 Aug 2023
8 Sept 2023
10 Aug 2023
6 Sept 2023
24 Aug 2023
10 Aug 2023 - 20 Aug 2023
Amount
M&L for brick work with old size sub class "B" brick straight or curved on plan exc 6 m mean radius and built in cement mortar 1 : 6 .
S&F GI Pipe 20mm dia tube medium grade fixed for Antinna Mast complete all as specified & directed.
Supply and fixing Stay assembly suitable for antenna mast complete with accessories as shown in electrical plate No 1 incl GI Adjustable Stay Rod of 16 mm Dia,incl stay clamps 3 nos on each pole, complete all as specified and directed.
S&F stay wire 8 mm thick for fixing anteena in position complete all as specified & directed.
M&L for plastering15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
S&F 3 mm aluminum Cable tray size 3.05mX0.12m for laying and protection of cable
Material & Labour for Plain Cement concrete type B-0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed.
M & L for joint free glazed coloured ceramic coloured tiles of 350mm x 250mm x 7mm /450X 350X 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed .
M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S & F in repairs single lever wall mixer with popup waste system , hot and cold facilites and 450 mm long braidaed hoses chromium plated. Make- QQP-71698PM of Jaquar or Equivlent.
S and F in repairs 15 mm angular stop cock chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed Cat ref Make- COP-067PM of Jaquar or Equvlent.
S & F in repair Stainless steel towel racks Towel Rack 600mm Long with Lower Hangers, complete all as specified and directed. Make-ACN 1181S of Jaquar or Equivalent.
S & F in repair Stainless Steel towel rail 600 mm long complete all as specified and directed. Catr ref Make-ACN-1111 SM 600 mm of Jaquar or Equivalent.
S & F in repair Stainless Steel Soap dish complete all as specified and directed. Make-ACN1131N of Jaquar or Equivalent.
S & F in repair Stainless Steel paper holdercomplete all as specified and directed. Make-ACN1151N of Jaquar or Equivalent.
S & F in repair Stainless Steel tumbler holder complete all as specified and directed. Cat ref Make-AKP-35741P1 of Jaquar or Equivalent.
S & F in repair corner glass shelf with bracket complete all as specified and directed. Cat ref Make-ACN-1173 of Jaquar or Equivalent.
S & F in repair wash single lever Basin Mixer without popup waste 450 mm long braided hoses complete all as specified and directed. Cat ref Make-COP-0018pm of Jaquar or Equivalent.
S & F in repair water closet with bracket, Rimless Bowl for Coupled WC with UF Soft Close Slim Seat Cover, Hinges, Fixing Accessories, Size: 385x645x815 mm,S Trap- 250 mm (With Conversion Bend) complete all as specified and directed. Make-ONS-WHT-10763P180VFSM of Jaquar or Equivalent.
S & F in repair shower rose with Exposed Shower Pipe with Provision For Simultaneous Working of Showers with Operating Divertor Knob, Round Shape dia 24mm, Size 975X 370 mm with Sliding Holder For Hand Shower, Wall Bracket & 15mm Concealed Water Inlet Connection (for connection to Concealed Shower Mixer) Without Showershower rose with complete fittings complete all as specified and directed. Make-SHA-1215R of Jaquar or Equivalent.
S & F in repair pedestal wash basin with bracket and complete set complete all as specified and directed. Cat ref Make- LYS-WHT-38801 of Jaquar or Equivalent.
S & F in repair free standing Bathtub with over flow & drain of size 1700X850X450/580 mm with all fixing in floor of Make-JBT-WHT-FSBTPB278X of Jaquar or Equivalent. complete all as specified and directed.
S & F 4-Hole Bath Tub Mixer Consisting of 2 No. Control Cocks, 1 Spout, 1 Telephone Shower With 8mm Dia. & 1.5m Long Flexible Tube with bracket of Make-QQT-7277 of Jaquar or Equivalent. complete all as specified and directed.
S & F Aluminum partiton enclosure with 2 fixed glass and 1 openable door fixed with side panel with square hardware & profile Glass: 8mm Left Version of Make-ACN-1173 of JaquarJSE-CHR-S840L1620H20XH: 2000 W: 1600-2000 or Equivalent. complete all as specified and directed.
Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.
M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying two coats of white wash complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connection and removal from site complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed.
Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed.
Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as spd & directed.
S&F in repair Swivel Mirror 630 X 445mm Rectangular Shape with complete fittings of Make- AKP-35795 of Jaquar or Equivalent. complete all as specified and directed.
Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all asdirected.
M&L Providing, fabrication and fixing in position of false ceiling at a height of 8 to 10’-0” from floor (or the height will be decided on the spot as per site conditions) by fixing 12 mm Th. Gypsum Board sheets on frame work of GI sheet section. The main runners of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 2’0”x2’0” c/c. The Gypsum Board must be fixed to the GI frame and joint to be properly filled in with POP paste and paper tape to get a leveled smooth ceiling. Recessing of the Gypsum Board for light fixtures must be done along with extra frame work of GI sheet section to hold the concealed light fixtures etc. including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete all as spd and directed
Surface excavation in soft/loose soil n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified & directed.
M&L for Soling with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber of thickness 150mm complete all as specified & directed.
M & L 75 mm thick PCC (1:4:8) type D2 for sub base of floor complete all as specified and directed by engr-in-charge.
M & L for 80 mm thick M-40 grade precast concrete interlocking paver blocks using grey cement and pigment any shape and size conforming to IS 15658-2006 as directed laid dry in floors complete all as specified and directed.
M&L for Tibba sand cushioning 40mm thick below paver block complete all as specified and directed.
Excavating in post holes(or similar holes)each n exc 0.5 cum ,getting out soft or loose soil ,returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm complete all as specified & directed.
Removing building materials etc to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified & directed.
M&L for steel work in tubular pipes as in vertical surfaces including special shaped washer such as column complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240
M&L for rolled section as in main and cross beam , hip and jack rafters; purlins where connected to common rafters and running rails andm guides for sliding doors fixed with angle cleats or other connecting plates in Fe 290 Gde E-165 complete all as specified
S&F for plates (plain or chequred ) channels ,square cut or notched (ordinary and counter sunk) forming holes , without any attachement in Fe 290 Gde E-165 complete all as specified.
M&L Mild steel screw bolt (machine made) dia 11 to 15 mm with hexagonal or square head at one end and screwed the other or screewd both ends each screwed end to be fitted with washers and one hexagonal nut length of bolt exc 5 cm but n. exc 10 cm long complete all as specified
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & Directed
S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type in roof, wall etc complete all as specified & Directed
S & F Framed work of angle or other section with gusset plate,base plates,rails,flat iron,round bars,braces,cover grills etc Fe 290(Gde-E-165) complete drilled for fixing of steel sheeting or other covering including welding work and necessary nut bolts etc to be prepared for hanging or sliding with and including either hooks, hinges, necessary holdfasts for fixing to wall/concrete base etc complete all as spfd and directed by engr in charge
S&F 1.25 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or weldedseams, including bending or turning up, mitred angles, etc. as required
M & L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L PCC 1:4:8 type D2 (40mm graded aggregate)as infoundation filling and mass concrete.
M&L for rendering 10mm thick on fair faces of brick wall or concrete surfaces in cement mortar(1:6) complete all as specified and directed
M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage / plain pattern of approved tint / shade(s) over a coat of water based primer complete all as specified and directed.
Supply, fixing and commissioning testing Package Air Cooling units of nominal air delivery 20000 CMH suitable for cooling upto 2000 sqft ISI mark ,complete comprising the following locations (bldg roof) marked in the layout plan. Make : SYMPHONY Model No PAC 20 or equivalent make in IDECool / Evapolar/Coolwind
All as per item no 56 above but for 18000 CMH
Supply , assembly and erection of Factory Fabricated GI sheet with TDF flange rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete of size 24 Gauge. complete all as specified and directed by Engineer - in charge.
Supply and fixing 13mm thick nitrile rubber sheet wherever exposed duct to sky having density of 40 Kg and finished by sealing joints and finished by adhesive tape as per IS-655 complete all as specified and directed.
Supply & Fix Powder coated extruded aluminium section supply air grilles of size 30cmX 60 cm with horizontal & vertical louvers with volume control & shut down dampers complete as required.
S&F Canvass connection openable type for Air cooling unit to duct complete all as specified and directed.
M & L for Sub main wiring of size 4 Sqmm (Nominal area), two single core PVC insulated unsheathed stranded copper conductor FRLS cable by drawing into New surface PVC conduit including 2.5 Sqmm PVC insulated standerd copper conductorFRLS cable as continuous earth wire conductor connected to common earth and all metal part/main switch all as directed by Engineer-in-Charge.
Supply & fix sheet metal enclosure for SPN MCB DB 2 way single door complete all as specified and directed
S&F MCB DP 230Volt 10 Amp, 10 KA fixed on DB complete all as specified.
S& L GI Pipe medium grade with all fitttings laid in trenches of size 20 mm dia. complete all as specified and directed .
S/F in replacement gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed 50 mm dia all as specified.
S&F for Rotational moulded Polyethylene water storage tanks (Cylinderical vertical with closed top), triple layer hoisted and fixed in position all as specified in SSR Part-I of cap 1000 Ltrs complete all as specified and directed.
Material and labour for plastering 10mm thick cement plaster in cement mortar 1:4 on fairfaces of brick work or concrete surfaces for fixing wall tiles complete all as specified and as directed by the Engineer-in-Charge.
Material and labour three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all assecified and directed.
Material and labour for Brick work with sub-class ‘B’ bricks straight or curved on plan exc 6m mean radius builtin cement mortar 1:4 for water tank support pillar complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Plain cement concrete 1:2:4, type B1 (20 mm graded aggregate) in bases for Column, basement slab,roof slab for water tank etc. complete all as specified and as directed by Engineer-in-Charge.
S & F round high bay light LED flameproof well glass in die cast AL housing with heat resisitant toughened glass suitable for Gas/Vapour group of IIA & IIB and zone 1 & 2 of 60 watt capacity . Crompton Cat part No.FWL1315-60-CDL or equivalent in Approved list of makes
S & F Flame proof weather proof Exhaust fan 300/400 mm sweep all as specified and directed by Engr-In-Charge
S & F Flame proof weather proof Ceiling fan 1200/1400 mm sweep all as specified and directed by Engr-In-Charge
Supply & Fix in repair Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V
M&L for sub-main wiring with two single core 2.5 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm steel metalic conduit fixed in wall including 2.5 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete. Note : 2 Run of 2.5 Sqmm, 1 Run of steel conduit & 1 Run of 2.5 Sqmm earth cable shall be measured as single unit length
M & L for point wiring for One light point/Fan point controlled by one switch, with cables 1.5 mm² size using 1.1 kV grade single core FRLSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in steel conduit surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed.
S & F MCB SPN 40 amps 'C' series breaking capacity 10 KA, 'C, curve 240 volts, 50 Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc.
S&F MCB SP, 6 to 40 Amps, 'C' series breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. Complete all as specified and as directed.
Supply & fix in repair Flame proof Sheet metal enclsoure for fixing MCBs 4 way 240 volt including MCB DP 32 A- 1 No as incomer & MCBs SP 6 to 32 Amps-2 Nos as outgoing with as specified .
M & L for point wiring for One light point controlled by one switch, with cables 1.5 sqmm size using 1.1 kV grade single core FRLSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure haing zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
M&L for sub-main wiring with two single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm dia non-metallic PVC conduit fixed in wall including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, (for AC points). Note : 2 Run of 4 Sqmm, 1 Run of PVC conduit & 1 Run of 4 Sqmm earth cable shall be measured as single unit length
S & F LED recessed ceiling panel Luminaire comprises of CRCA sheet metal body powder coated in white. The LED clusters are assembled in the body & special high translucent frosted diffuser is used for uniform glare-free light distribution suitable for 600 X 600 mm ceiling. Operating voltage range 140-270 volts , 36 watt, color temp 5700 K, color rendering index more than 80, including LED light driver and ceiling mounting accessories connecting up with three core flexible copper conductor cable of suitable size.Crompton Cat part No.LCTLRNE-36-F0-CDL or equivalent in Philips/Bajaj/Havells
S & F sheet metal enclosures MCB SPN DB 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 with double glazed door for incorporating MCBs,IP-43 including taking down old unserviceable single phase DBs, all as specified and as directed.
S & F MCB SPN 40 amps 'C' series breaking capacity 10 KA, 'C, curve 240 volts, 50 Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc.
S&F MCB SP, 6 to 40 Amps, 'C' series breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. Complete all as spcified and as directed.
Shifting of 1.5/2 TR Split AC complete indoor and outdoor unit from existing location and reinstallation of the same to the location specified . Note- (i)Any fastener,Cu pipe, T&P and other accessories reqd for shifting is incluided in the quoted rate. (ii) Refrigerant gas required for top up is also incluided in the quoted rate.
BIDAWAT ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .