Repair/Renewal of steel furniture under GE Bharatpur

Amount

Repair to GI Charpoy 32 mm(FD-220) as under:-

Removing the existing worn out UNSV nylon newer from charpoy GI pipe Supply and fixing cleats of flat iron 40mm x6mm thick (10 Nos per charpoy) not less than 50mm long welded to GI pipe including drilling of holes on each cleats and providing 03 Nos of stiffener of flat iron size of 40 x 6 mm between long to long rail with MS flat 40 x 6mm, 50mm long of all as specified and directed by Engineer- in-charge.

Tightening of all loose parts check nuts elbows, long rails and sort rails etc to hold the charpoy tight to original shape as specified on drawing and as directed by Engineer-in-charge.

Removing the unserviceable long rails of charpoy GI pipe 32 mm med grade and replacing with new long rail of 32 mm dia med grade GI pipe with ISI marked, duly threaded at both ends (minimum 10 threads for each end complete and all as specified and shown on Drg.

Removing the unserviceable short rails from charpoy GI pipe med grade and converting into short rail made out of GI pipes by cutting, threading into short rails (minimum 10 threads) for each ends fixing as specified on drawing and as directed by Engineer-in-charge.

Removing the unserviceable legs of charpoy GI pipe 32mm dia med. Grade and converting into legs made out of GI pipes by cutting to size of legs duly threaded at one end and other side base plate made out of 60mm dia 3mm thick MS sheets with proper and smooth welding remain same as specified on drawing and as directed by Engineer-in-charge.

Removing the unserviceable elbow GI 32mm dia 3 way from charpoy GI pipe frame Supply and fix new elbow 32mm dia 3 way with ISI marked and as specified on drawing and as directed by Engineer-in- charge.

Removing unserviceable GI check nut 32mm dia medium grade from charpoy GI pipe. Supply and fix new 32mm dia check nut all as specified and directed.

Removing the existing worn out UNSV MDF/ply top from charpoy GI pipe as directed by Engineer-in-charge.

Supply and fixing of flat Iron size of 40 x 6 mm from each charpoy GI pipe 32 mm with two support flate Iron 40 x 6 mm and four nos fixing and welding each charpoy all as per shown in drg & complete all as specified and directed.

Supply and fixing new ply BWR 6.5' x 3' x 12 mm thick ISI marked on top with flate head nut & bolt size 10mm x 75mm long (10 Nos) with washer, rest all as shown in drg and directed by Engineer- in-charge.

Taking out Old UNSV (FMN set) for charpoy GI 32mm and S&F new U type FMN set FMN set made of 15mm round MS tube of size 1mm thick. Rest all as specified and directed by Engr-in-Charge

Repair to charpoy GI folding with nylon newer as under:-

Removing the existing worn-out nylon newer from charpoy GI folding tightening the charpoy after completing necessary welding works to charpoy wherever required and replacement of UNSV nut, bolt and washer of required length and size wherever required, tighting the frame properly. Supply nylon newer 50/55mm wide, virgin quality and re-weaving closely with the charpoy frame (nylon newer shall not be manufactured from recycled material) all as specified and directed by Engineer-in-charge.

Repair to chair revolving tilting/chair computer FD/E6/MAP/01) as under:-

Removing the old UNSV/worn out wheels from the chairs, replacing with new nylon wheel duly fitted to the chair with suitable size of screws all as shown in drawing and directed by engineer-in-charge.

Removing the old UNSV /worn out gas lift mechanism pump from the chair ,replacing with new high quality gas lift mechanism pump along with tilting belt suitable size duly fitted to the chair all as specified and directed by Engineer–in-charge.

Removing the old UNSV /worn out arm rest (handle) from the chair, replacing with new D type soft /hard handles of suitable size duly fitted to the chairs with screws/nut and bold at required size all as specified and directed by engineer-in-charge.

Removing the old UNSV stand base from the chairs, replacing with new stand base metal powder coating with nylon wheel of required size to be fitted to the chair at original shape complete all as specified and directed by Engineer-in-charge.

Removing the old UNSV seat from the chair, replacing with new seat made out of 12mm thick molded ply sheet and chemically treated and cushioning covered by fabric/leather cloth as approved by GE all as specified and directed by Engineer-in-charge.

Removing the old UNSV back from the chair, replacing with new black made out of 12mm thick molded ply sheet and chemically treated and cushioning covered by fabric/leather cloth as approved by GE all as specified and directed by Engineer-in-charge.

Repair to locker bed side steel (FD-257 & FD-1029 )as under:-

Removing of UNSV hinges from shutters S&F of new hinges 75mm by welding on drawing and directed by engineer-in-charge.

Removing UNSV haps and staples from lockers S&F of new haps and staples 75mm steel CP duly welded to the locker shutters in original shapes all as specified on drawing and directed by Engineer –in-charge.

Removing of UNSV handles from lockers S&F of new handles 100mm steel CP{c type} duly welded to the locker shutter in original shape all as specified on drawing and directed by engineer-in-charge.

Material and labor for scraping of old paint and applying in 1 coat of synthetic enamel olive green/steel grey paint over 1 coat of steel primer paint by spray painting, applying putty and making smooth of surfaces complete before painting to the lockers steel inside and outside surfaces including legs all complete all as specified on drawing and directed by Engineer-in-charge.

Repair to Almirah large/med/small steel (FD-67,243,1031and 1032)as under:-

Removing of UNSV 3 way locking device and providing S&F of new locking device 3 way and fixing them to almirah large/med/small and making original shape complete welding to the Almirah all as specified on drawing and directed by Engineer-in-charge.

Removing of unserviceable locks and providing new locks of size 50mm,six levers with stainless steel keys in duplicate for Almirah large/mad/small steel with shelves and fixing them with existing with 3 way locking system all as specified on drawing and directed by Engineer-in-charge.

Removing of unserviceable broken handles & providing new handle steel chromium plated 100mm to Almirah large/med steel with shelves & fix suitably as specified on drawing and directed by Engineer-in-charge.

Removing unserviceable shelves of Almirah large steel with shelves and providing new duly painted with two couts of synthetic enamel paint over a coat of red oxide primer by means of spray painting and providing necessary cleats/nuts and bolts etc complete all as specified on drawing and directed by Engineer-in-charge.

All as per item no 5.04 above but shelves for almirah med/small steel with sleves

Removing denting wherever required in Almirah large/med/small steel with sleeves complete all as specified on drawing and directed by engineer-in-charge.

Spray painting to both external and internal surfaces of Almirah large steel with sleeves with one coat of synthetic enamel paint in olive green colour scraping and welding, wherever necessary and applying putty and making smoothening of surfaces complete before painting all as specified on drawing and directed by Engineer-in-charge.

All as per item No. 5.07 above but for Almirah med/ small steel.

Repair to table office clks steel (FD-84M,1007 &1004M) as under:-

Removing unserviceable locks & drawers providing new drawer brass locks and providing new drawer brass lock with stainless steel duplicate keys for tables all as specified on drawing and directed by Engineer-in-charge.

Removing the UNSV table top and providing new top of size 1220mm lengthx610mm width, made out of 18mm thick pre-laminated particle board including 4mm thick teak beading all round the table top complete duly French polished all as specified on drawing and directed by Engineer-in-charge.

Removing the UNSV drawers handles of tables office Clk steel and providing new handles MS plastic coating plastic fiber rectangular type and fixing to the tables all as specified on engineer-in-charge.

Painting complete table by means of spray painting with one coat of synthetic enamel paint OG colour to the table frames, drawers and drawer cabinet in side out side after preparation of surfaces by scrapping after completion of necessary welding work wherever required all as specified on drawing and directed by Engineer-in-charge.

Repair to table dining (FD-165(M) as under:-

M&L welding frame of old table dining OR’s and making good condition for fixing of top and apply one coat of synthetic enamel black paint and providing hard rubber shoes 04 Nos for each frame at leg side all as directed by Engineer-in-charge.

Removing unserviceable top of table dining ORs and providing new top made out of 18mm thick plain particle board of size 1900x685mm covered with 22 gauge superior quality aluminum sheet and fixing with suitable size of screws to table frame all as drawing and as directed by Engineer-in-charge

Repair to chair tubular with arms steel (FD-75mm & 75mm) as under:-

Removing unserviceable/worn out seat frame from chair tabular steel with arms and S&F new seat frame made out of second class hard wood duly caned as Godrej pattern. Remaining all as specified on drawing and as directed by Engineer-in-charge.

All as per ser. item No 8.01 above but for back frame only.

M&L painting, synthetic paint OG one coat to steel frame of chair tabular steel with/without arms including preparation all as specified & directed.

Removing unserviceable/worn out handle from chair tabular steel with arm and S&F new handle made out of second class hard wood duly two coats of black colour synthetic enamel paint over a coat of pink primer all as specified on drawing and as directed by Engineer-in-charge.

Repair to chair tabular without arms steel (FD-75mm) as under:-

Removing unserviceable/worn out seat frame from chair tabular steel without arms and S&F new seat frame made out of second class hard wood duly caned as Godrej pattern. Remaining all as specified on drawing and as directed by Engineer-in-charge.

As per ser. item No 9.01 above but for back frame only

M&L painting, synthetic paint OG one coat to steel frame of chair tabular steel with/without arms including preparation all as specified & directed.

Repair to chair verandah (FD-19(M)/256/259) as under:-

Removing old worn out/UNSV plastic cane from chair verandah, welding the loose/broken portion of chair frame wherever required and applying one coat of synthetic enamel paint white on frame. Re caning the chair with 5mmx0.4mm thick plastic cane good quality (recycled cane shall not be used). Provided with 04 Nos rubber shoes to legs of chair verandah. All as specified on drawing and as directed by Engineer-in-charge.

Repair to table office offr steel (FD-84M&1003) as under:-

M&L painting complete table by means of spray painting with one coat synthetic enamel paint OG color to the table frames, drawers and drawer cabinet inside and outside after preparation of surfaces by scrapping as directed after completion of welding work where-ever required all as specified on drawing and as directed by Engineer-in-charge.

Repair to table 900x600(3’x2’) with drawer and with out drawer FD-1007/1008 as under:-

Removing the UNSV/ broken table top and providing new top of size 900x 600 made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick all round the table top complete duly French polished all as directed and as shown on drawing.

Repair to table 900x900 FD-1009 as under:-

M&L welding frame of old table 900x900mm and making good condition for new fixing of top and apply one coat of synthetic enamel olive green paint and providing hard rubber shoes 04 Nos for each frame at leg side all as directed by Engineer-in-charge.

Removing unserviceable/broken top of table and providing new top made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick all round the table top, duly French polished as directed and as shown on drawing.

Repair to form without back FD-1027

M&L welding frame of old form without back and making good condition for fixing of new wooden plank and apply one coat of synthetic enamel blank paint and providing hard rubber shoes 04nos for each frame at leg side all as directed by Engineer-in-charge.

Removing old UNSV/broken wooden plank and S&F new top made out of 25 mm thick and 1st class hardwood of size 1900x305mm duly painted with golden brown paint over one coat of primer and fixed to the frame with suitable nut bolt with washer and screw all as per drawing and all as directed by Engineer-in-charge.

Repair to tea poy verandah FD-383 & FD/E6/MAP/17 are as under:-

M&L welding frame of old tea poy verandah and making good condition for fixing of new top and apply one coat of synthetic enamel olive green paint and providing hard rubber shoes 04 Nos for each frame at legs side all as directed by Engineer-in-charge.

Removing unserviceable top of tea poy verandah and providing new top of size 900x450mm, made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick all round the top, duly French polished as directed as shown on drg.

Chair Barber with adjustable neck rest FD SK-483

M&L for removing existing UNSV seat and back with foam cushion and S&F the same of chair barber all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing existing UNSV set of arms rest and S&F new arms rest set of chair barber all as specified and shown on drawing or as directed by Engr in-charge.

Chair writing Steel Includes following items (Refer Drg No. FD/E6/MAP/12):-

M&L for removing existing UNSV seat and back with foam cushion incl tapestry cloth and S&F the same of chair writing steel all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing existing UNSV set of arms rest and S&F new arms rest set of chair writing steel all as specified and shown on drawing or as directed by Engr in-charge.

Material & Labour for removing paints by cutting/scrubbing from chair writing steel and continuous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing or as directed by Engr-in-charge

Chair School with hard board FD/E6/MAP/05

M&L welding frame of old Chair school and making good condition for fixing of new hard board and apply one coat of synthetic enamel black paint and providing hard rubber shoes 04 Nos for each frame at legs side all as directed by Engineer-in-charge.

Book self open large steel FD-69(M)):-

Removing of old UNSV shelves of book shelf open large steel and S&F new shelves on the same place with proper nut bolt /welding. Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old painted steel surfaces of book self open large steel FD-69(M) and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete, Rest complete all as specified and directed.

Book self open small steel:-

Taking out existing old shelves of book case open small steel , and S&F new in the same place . shelves should be made of 18 gauge plain sheet (1.2 mm) duly painted by two coats of synthetic enamel paint over a coat of red oxide primer, rest all as per drawing and complete all as specified and directed.

M&L for preparing old painted steel surface of book Self open small steel and brush/ spray painted with one coats of syntshetic enamel paint(OG) to all internal and external surfaces complete. Rest complete all as specified and directed.

Book case steel FD-1028:-

Taking out old UNSV glass of book case steel FD-1028 and S&F new transparent glass of 6 mm thick as specified ISI marked best quality of size as per drg wiith necessory fitting arrangement Rest all as per shown in drawing and complete all as specified and directed.

M&L for preparing old painted steel surface of book case steel FD-1028 and brush /spray painted with one coats of syntshetic enamel paint(OG) to all internal and external surfaces complete. Rest all as per complete all as specified and directed.

Taking out existing old lock of book case steel FD-1028 and S&F new lock with double key (ISI marked, make :- Godrej/ Link) suitable for book case steel. Lock with double key will fixed with shutter of book case steel. rest all as per Drg and complete all as specified and directed.

Bed hard steel FD/E6/MAP/18R :-

Taking out old unserviceable ply top from each bed hard steel FD/E6/MAP/18R and S&F new plywood BWR 6.5' x 3 'x12 mm thick ISI marked on top with nacessary fitting arengement. rest all as per shown in drg complete all as specified and directed.

M&L for preparing old painted steel surface of bed hard steel and brush /spray painted with one coats of syntshetic enamel paint (black) to all external surfaces complete. Rest complete all as specified and directed.

Charpoy IP with hard top FD/MAP-II/01, FD/MAP-04;-

Taking out old unserviceable ply top from each Charpoy IP with hard top; and S&F new plywood BWR 6.5' x 3 'x12 mm thick ISI marked on top with nacessary fitting arengement. rest all as per shown in drg complete all as specified and directed.

M&L for preparing old painted steel surface of Charpoy IP with hard top and brush /spray painted with one coats of syntshetic enamel paint (black) to all external surfaces complete. Rest complete all as specified and directed.

Taking out old UNSV PVC shoe of FD/MAP/-II/01, FD/MAP/04, FD/E6/MAP/18R and S&F new Hard PVC shoe of shall be provide at bottom of legs, PVC Shoe made best quality . Rest all as per shown in drg complete all as specified and directed.

Charpoy Folding IP with hard top(FD-388R) :-

Taking out old unserviceable ply top from each charpoy folding IP with hard top and S&F new plywood BWR 6.5' x 3' x12 mm thick ISI marked on top with necessary fitting arengement. rest all as per shown in drg complete all as specified and directed.

M&L for preparing old painted steel surface of charpoy folding IP with hard top and brush /spray painted with one coats of syntshetic enamel paint (silver) to all external surfaces complete. Rest complete all as specified and directed.

Almirah Large Steel Glazed FD-104M,) :

Taking out old UNSV glass of almirah large steel glazed FD-104M and S&F new transparent glass made of 6 mm thick as specified ISI marked best quality of Size 750 mm x 230 mm wiith necessory fitting arrangement rest all as per shown in drawing and complete all as specified and directed.

M&L for preparing old painted steel surfaces of steel almirah Glazed Steel (large) (FD-104M ) and painted to all internal and external surfaces complete by spray/Brush with one coat of synthetic enamel paint(OG) complete all as specified and directed.

Rack Side 3/4 spaces steel :-

M&L for preparing old painted steel surfaces of Rack Side 3/4 Spaces steel and brush /spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete.Rest complete all as specified and directed.

Receiptical small FD-1045:-

Removing of old UNSV bucket of receiptical small steel and S&F new bucket on the same place. Bucket should be made of 1 mm thick plain GI sheet. Rest complete all as specified and directed.

M&L for preparing old painted steel surfaces of Receriptical small steel and brush /spray painted with one coat of synthetic enamel paint (Silver/ Grey) to all internal and external surface complete. Rest complete all as specified and directed.

Receiptical large steel FD-1044:-

Removing of old UNSV Bucket of receiptical large steel and S&F new bucket on the same place. Bucket should be made of 1 mm thick plain GI sheet. Rest complete all as specified and directed.

M&L for preparing old painted steel surfaces of Receriptical Large steel and brush /spray painted with one coat of synthetic enamel paint (Silver/ Grey) to all internal and external surface complete. Rest complete all as specified and directed.

Shoe rack steel FD/E6/MAP/02R :-

M&L for preparing old painted steel surfaces of shoe rack steel and brush /spray painted with one coat of synthetic enamel paint (black) to all internal and external surface complete. Rest complete all as specified and directed.

GLOBAL ENGINEERS AND INNOVATORS

F.M. KHAN SONS

SK INDUSTRIES