PROVN OF RETAINING WALL NEAR BLDG NO BT-10, BT-11, BT-13 AND BT-14 OF 220 TRANSIT CAMP AND PROVN OF 02 X BATHROOM (01 X MALE AND 01 X FEMALE) NEAR LAB OF CENTRAL MI ROOM BLDG NO T-29 AND T-30 AT RMS UNDER AGE B/R-I OF GE 868 EWS

Amount

M&L surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Excavating in Trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc or for shafts,wells, cesspits, manholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge

M & L for PCC (1:3:6) type C-2 using 20mm graded aggregate as bond stone including necessary form work complete all as specified and directed by Engineer-in-Charge

M & L for PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation complete all as specified and directed by Engineer-in-Charge

M & L for PCC (1:3:6) type C-2 using 20mm graded aggregate as in coping and likes including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed by Engineer-in-Charge

M & L for walling of random rubble, uncoursed well bounded bedded and solidly hearted, built in CM (1:6) including provision of weep holes complete all as specified and directed by Engineer-in-Charge

M&L for raised pointing to random or polygonal rubble uncoursed or brought up to course in CM (1:4) complete all as specified and directed by Engineer-in-Charge

S&F for 110 mm dia PVC (SWR) pipe single socketed in any length with rubber joints laid in trenches/floor/ weep holes and similar work complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in soils

M&L Cement concrete Type D2 1:4:8 (40 mm graded in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge

M&L Reinforcement Cement concrete Type B1 1:2:4 (20 mm graded aggregate ) in foundations, footing, plinth beam etc mass concrete complete all as specified and directed by Engineer-in-Charge

M&L Reinforcement Cement concrete Type B1 1:2:4 (20 mm graded aggregate ) in Columns complete all as specified and directed by Engineer-in-Charge

All as per Item No 05 but for lintels beams over 1.5m span etc complete all as specified and directed by Engineer-in-Charge

All as per Item No 05 but in chajjas ,cover slab complete all as specified and directed by Engineer-in-Charge

M&L for use and waste of form work to sides of concrete foundations, footings, bases of columns etc with rough finished surfaces of concrete flat complete all as specified and directed by Engineer-in-Charge

M&L for use and waste of form work to sides of plinth beam etc with rough finished surfaces of concrete flat complete all as specified and directed by Engineer-in-Charge

M&L for use and waste of form work to sides of columns etc with rough finished surfaces of concrete flat complete all as specified and directed by Engineer-in-Charge

Formwork to chulla hoods, chajjas, troughs and similar items incl edges complete all as specified and directed by Engineer-in-Charge

M&L reinforcement TMT bars 10 mm dia, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire complete all as specified and directed by Engineer-in-Charge

M&L reinforcement TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 complete all as specified and directed by Engineer-in-Charge

M & L for brick work with sub class `B' bricks (old size), straight or curved on plan exc. 6 mtr mean radius built cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge

M&L half brick work with sub class "B" bricks straight or curved in plan exceeding 6 mtr mean radius built in CM(1:6) complete all as specified and directed by Engineer-in-Charge

Hard core of broken stone guage n. exc. 63mm deposited spread and levelled in layers n. exc. 15cm thick watered and rammed to true surface complete all as specified and directed by Engineer-in-Charge

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) in floor as in sub base complete all as specified and directed by Engineer-in-Charge

M&L 40 mm thick cement concrete type B-1, 1:2:4 (40 mm graded aggregate) in floor complete all as specified and directed by Engineer-in-Charge

M&L for 25 mm thick PCC (1:2:4) type-B-0 using 12.5mm grade aggregate as in damp proof course etc complete all as specified and directed by Engineer-in-Charge

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured tiles to match over 15 mm thick screed bed (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for glazed cramic coloured tiles in vertical surface 450x350x7 mm thick and jointed in neat cemment slurry and pointed in white or colour cement to match the exeisting surface over 10 mm thick screed bed (1:4) complete all as specified and directed by Engineer-in-Charge

M&L for 15 mm thick cement plaster in CM (1:6) on other face of brickwork surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for 10 mm thick cement plaster in CM (1:4) on fair faces of brickwork complete all as specified and directed by Engineer-in-Charge

M&L mild steel work post, truss, purlin etc confirming to Fe 410-w grade E 250 quality B complete all as specified and directed by Engineer-in-Charge

S & F for bands, straps, supports or stays for rainwater, ventilating pipes, incl bolts, if reqd : hooks (say), heavy, for large gates, hook and pintle hinges : large hasps and staples; chains; hand made sliding bolts ; clamps; hold fasts; waal ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts,; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge

S & F 0.50mm thick pre-painted galvalume aluminiun zinc coating GI based colour sheeting as in roof covering complete all as specified and directed by Engineer-in-Charge

M&L preparation of new surfaces & applying two coats cement base paint over a coat of alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge

M&L for distempering walls with two coats of washable distemper oil emulsion on new surfaes(white or tinted) as directed after washing/rubbing down and stopping of distempered and painted surfaces as in preparatory work to give uniform and smooth finish complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new surfaces & applying three coats white wash complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new steel surfaces of any description, not otherwise described over 10 cm wirth or girthand applying two coat of synthetic enamal paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge.

S&F soild PVC door frame of size 50mm X 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panal PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottem rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cemnt for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge

S&F 125mm long aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-Charge

S&F 100mm long stainless steel butt hing complete all as specified and directed by Engineer-in-Charge

Supply and fixing vitreous China wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with coloured PVC seat cover and making all necessary connections complete as specified and as directed by the Engineer-in-Charge. Make: Parryware Cat No C0278 for water closet, Cat No C8071 EWC Standard for PVC seat cover or equivalent approved make.

S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) complete all as specified and directed by Engineer-in-Charge

S&F for urinal spreader chromium plated screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge

S&F vitreous China squatting plate Urinal complete all as specified and directed by Engineer-in-Charge

S & F Wash basins,white, vitreous china flat back ,size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand PVC waste pipe PVC connection CP waste coupling complete all as specified and directed by Engineer-in-Charge

S&F soap dish, CP approximate size 160x 160mm with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge

S & F PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 ltrs capacity incl flush pipe complete all as specified and directed by Engineer-in-Charge

S&F PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and directed by Engineer-in-Charge

S&F of 75 dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engineer-in-Charge

S&F of 110 dia PVC (SWR) bends complete all as specified and directed by Engineer-in-Charge

S&F of 75 dia PVC (SWR) bends complete all as specified and directed by Engineer-in-Charge

S&F 15 mm dia GI tubes 'medium grade' with all fitting and fixed complte to walls or laid in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia GI tubes 'medium grade' with all fitting and fixed complte to walls or laid in floor complete all as specified and directed by Engineer-in-Charge

S&F 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screw down, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm dia stop valves fancy type CP screwed down high pressure with crutch or buter fly handle screw down, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm dia gate valves gun metal screwed down high pressure with iron wheel handle screwed both end for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge

S&F CP pillar taps fancy type 15 mm bore, chromium plated, with capstan heads screwed down high pressue, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe complete all as specified and directed by Engineer-in-Charge

M & L for angular stop cock CP with wall flange, fancy type 15 mm bore dia complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) 110mm dia junction single T equal or un equalwith an floor complete all as specified and directed by Engineer-in-Charge

M & L cement concerte 75mm thick 1:3:6 type C-1 (using 40mm graded) as in plinth protection,paving finished smooth and even without using extra cement complete all as specified and directed by Engineer-in-Charge

M & L cement concerte in surface channels and drains type C-2 1:3:6 using 20mm graded aggregate complete all as specified and directed by Engineer-in-Charge

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc complete all as specified and directed by Engineer-in-Charge.

M&L anti fungal chequered cement concrete tiles 250mmx250mmx20mm thick with 20mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:4 etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed by Engineer-in-Charge

Cutting into existing manholes for 100mm bore pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as requried complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium frame for doors, windows, ventilators, grills, guard bars etc members made out of extruded Aluminium of any section and in any position including fixing Clips and provision of roller for fixing of prelaminated particle board , roller and roller plate for fixing of shower cubicals complete all as specified and directed by Engineer-in-Charge

S & F anodized aluminium window and ventilators shutters, sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing ,anodized aluminium snap beading, screws, anodised aluminium fittings complete all as specified.

S&F 3mm thick figured glass, ordinary quality and glazing with oil putty in square n.exe 0.5 sq. m. in each pane complete all as specified and directed by Engineer-in-Charge

S&F Rotational moulded polyethylene water storage tanks 1000 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball brass valve and all as specified in SSR part -I complete all as specified and directed by Engineer-in-Charge

Material and labour for (concelaed Type) point wiring including necessary chese cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. Note: A. Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. B. The Rate of point wiring includes the following :- (i) Copper wire (ii) PVC Conduit with accessoreis (iii) Chase cutting (iv) other accessories such as modular GI box, modular inner plate and modular Cover plate etc Make of PVC Conduit: Supreme/ Ori-Plast/ finolex Make: RR kable/finolex/richa/Havells

(a) One light point controlled by one, one way switch .

(b) One Ceiling fan/Exh fan point controlled by one, one way switch.

All as per item No 73.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed by Engr-in-Charge.

M&L for Modular Switch 1 way 6A,1 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

M&L for modular switch 1 way 16A, 1 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

M&L Modular Socket ,6A/16A-2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed by Engr-in-Charge. Make: Plaza/SSK/Hager

M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and directed by Engr-in-Charge. Make : Havells Cat No LHFXCEP1TNNW020(batten) & LHDLEFXD5LR020(LED Tube) or equivalent in Bajaj/Philips

All as per item No 79.00 above but 09 watt LED, 2', Wall mounted with polycarbonate housing/ batten complete all as specified and directed by Engr-in-Charge. Make Havells Cat No LHEXBQP5IN1W009 or equivalent in Bajaj/Philips

M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 2.5 Sq mm and one run of PVC Conduit with accessoreis of suitable size shall be measured as one unit length complete all as specified and directed by Engr-in-Charge. Make: RR kable/finolex/richa/Havells

M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and directed by Engr-in-Charge. Make:- Legrand Cat No 507610 or equivalent in ABB/Siemens

M&L for MCB SPN 32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and directed by Engr-in-Charge. Make:- Legrand Cat No 408617 or equivalent in ABB/Siemens

M&L for MCB SP 5-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and directed by Engr-in-Charge. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting complete all as specified and directed by Engr-in-Charge. Make oF Lamp holder:- Plaza/SSK/Hager

M&L for modular metal flush box 3 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

M&L for modular metal flush box 4 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

M&L for modular white cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells.

M&L for modular white cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

S&F for fixing Exhaust fan, Metallic, AC single phase 230/ 240 volts of size 300 mm sweep with louvre shutter including anchor bolt of suitable size for fixing arrangement and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and directed by Engr-in-Charge. Make ; Bajaj/usha/CG

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated including suitable size and length of PVC connection for hot & cold water and fixing arrangement complete all as specified and directed by Engr-in-Charge. Make : Havells/Usha/Bajaj

Supply and fixing GI 15mm bore pipe Medium grade with complete fittings and fixed complete to walls and ceilings or laid on floorscomplete all as specified and directed by Engr-in-Charge. Make : TATA/JINDAL/Surya

S&F 15mm bore stop cock, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

Supply and fixing 15mm bib tap long nose with flange cast copper alloy CP fancy type, screwed down screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

Kalim sons

VIHUTO YEPTHO

Shri Atoshe Tuccu