Improvements to the Community Hall at Barma Colony Sebasthiyar Kovil at Dharmapuram in Karai

Amount

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

15.13.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead - of area 3 sqm and below

9.1.2P Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Padak wood

9.5.11P Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Padak wood - 35 mm thick shutters

9.5.1.1F Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Forest teak wood - 35 mm thick shutters

9.55.1 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete - 125 X 65 X 2.12 mm

9.62.1 Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc.complte - 300 X 16 mm

9.63.1R Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 250 x10 mm

9.165.1B Providing and fixing of 65 mm Godrej Navatal lock of 7 levers with 3 keys etc complete

13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more new work over an under coat of suitable shade with ordinary paint of approved brand and manufacure

14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work

14.42.1 White washing with lime to give an even shade - Old work (two or more coats)

6.11 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand)

13.1.1 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

13.42.1 Distempering with 1st quality acrylic washable distember (ready mixed) of approved manufacutrer , of required shade and colour complete as per manufacturer 's specification - Two or more coats on new work

15.2.2 Demolishing cement concrete manually/by mechanical means including disposal of materials within 50 metres lead- nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

12.20 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete

1.3.12 Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 300mm X 250mm X 50mm. Deep

1.6.12 Providing and fixing of following size phenolic coated sheet on existing wooden board: - 300mm X 250mm X 3mm Thick

1.5.1 Supplying and drawing of 1.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:-

1.5.2 Supplying and drawing of 2.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:

1.7.1.1 Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay :-

1.7.1.3 Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

1.7.1.6 Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:

1.7.1.8 Supplying and fixing 5/6amps indicator on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

1.7.3.16A Supplying and fixing of 20A single phase DP main switch with Keycard Switch on the existing modular plate and switch box including connections but excluding modular plate as required.Make: MK :

2.2.2.1 Supplying and fixing 6 amps to 32 amps rating ,Single pole,240 volts,'c' series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:ABB/L&T Hager

2.4.1 Supplying and fixing of sheet steel, DP switch Rewirable porcelain fuse unit, 230volts including drilling holes on the board, connections, earthing the body etc. as required:- 16Amps double pole main switch.Make:Standard/Havells

3051&3112 1x40W box type single tube light fitting with copper choke & starter with tube, make:philips/Bajaj

259 Bulk head fittings aluminium alloy body heat resistant prismatic glass cover with specially designaed gasket (GLS 100W type) Make : Philips/Bajaj

3053 Supplying and fixing 1 x 36w/40w Single tube Street light fittings with sheet aluminium housing and UV stabilized acrylic cover.Make: Philips/Bajaj

3127 1200mm sweep double ball bearing ceiling fan. Make:Almonard/Usha

1.7.1.15 Supplying and fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor /Vinay:

M.ARUMUGAM

ANANDHARAJ P