Renovation of Inspection House, Seechpal and Beldar Quarters at Parsadepur, Raeebareli.

Demolishing R.B. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meter

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area 3 sq. meters and below

Scraping old white or color wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meters

E/w in cutting in foundation of masonry Work including lead upto 30 M. And lift upto 1.5 M and disposal and back filling as per direction of engineer-in-charge.

Earth work by Power Transport for a lead of upto 1 km including Excavation, Loading, Unloading, Royalty, manual compaction and dressing including all lift Rates shall be applicable for lead beyond 630 m and upto 1km.

Sand filling in foundation trenches as per drawing and MORD technical specification Clause 305.3.9 Including cost of material,labour and T&P Complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 meter height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 meter center to center, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc., wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge Note:- (1) The elevation area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works.Including cost of material,labour and T&P Complete.

Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) Including cost of material,labour and T&P Complete.

Brick work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) Including cost of material,labour and T&P Complete.

Half brick masonry with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level Cement mortar 1:3 (1 cement:3 coarse sand)Including cost of material,labour and T&P Complete.

Cement concrete flooring 1:2.4 (1 cement: 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate.Including cost of material,labour and T&P Complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded ston aggregate 40 mm (nominal size) Including cost of material,labour and T&P Complete.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:1:5:3 (1 cement: 1% coarse sand (zone-lll): 3 graded stone aggregate 20 mm (nominal size)Including cost of material,labour and T&P Complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement. with 1:1.5 3 (1 cement: 1.5 coarse sand(zone-Ill): 3 graded stone aggregate 20 mm nominal size) Including cost of material,labour and T&P Complete.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass Including cost of material,labour and T&P Complete.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform.Including cost of material,labour and T&P Complete.

10-12mm thick plaster with cement mortar in proportion of 1:6 (1 cement: 6 coarse sand) Including cost of material,labour and T&P Complete.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement: 3 fine sand).Including cost of material,labour and T&P Complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) Including cost of material,labour and T&P Complete.

|Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Including cost of material,labour and T&P Complete.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give even shed two or more coat ob new work 1st quality (Royal Silk) Asian/burger Including cost of material,labour and T&P Complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 M2 over and including priming coat of exterior primer applied @ 0.90 liter/10 M2) Including cost of material,labour and T&P Complete.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter open able length (total length 90 m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately) Including cost of material,labour and T&P Complete.

Fabrication of mild steel/iron work in grill, gates railing, door and window frames including cutting, drilling, welding/ riveting and hinges, where necessary and fixing in position including cost of all material, labour T&P etc. required for proper completion of work with one coat of red oxide primer.Including cost of material,labour and T&P Complete.

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Including cost of material,labour and T&P Complete.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Including cost of material,labour and T&P Complete.

Providing and laying sam vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ M2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Including cost of material,labour and T&P Complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per M2, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colors, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq m including pointing the joints with white cement and matching pigments etc., complete Including cost of material,labour and T&P Complete.

Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank 1000 Ltr Capacity

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid — each 6941.30

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 liter P.V.C. automatic flushing cistern.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality (CERA & parry ware)

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall as per direction of Engineer in Charge.(ASTRAL /SUPREME /ASHIRWAD) 15 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall as per direction of Engineer in Charge.(ASTRAL /SUPREME /ASHIRWAD) 20 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall as per direction of Engineer in Charge.(ASTRAL /SUPREME /ASHIRWAD) 25 mm nominal outer dia Pipes.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 250 mm

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet (CERA & parry ware)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.17.19.1 10 liter (full flush) capacity-white

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to is 7231, with all fittings and fixtures complete.10 liter capacity - White

Wiring point for light with 1.5 sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, modular type switch & ceiling rose/angle/batten holder on 3mm. Thick phenolic laminated Bakelite sheet etc. complete in all respects as directed including matching color wash.with modular type switch in place of piano type switch.

Wiring point for fan/fresh air fan (light. duty exhaust fan) with 1.5 sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and pally laid in slab along with the reinforcement before concreting, complete with 14SWG copper earth continuity wire, piano type switch & ceiling rose on 3mm. Thick Bakelite sheet etc. Complete. in all respects, as directed including matching with modular type switch in place of piano type switch.

Wiring point for plug with 1.5sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire and piano type switch and socket etc. Complete in all respects including matching color wash with modular switch & socket in place of piano type switch & socket.

Wiring point for call bell with I.5sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with the reinforcemen.t before concerting complete with l4 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc., complete in all respects including matching color wash.with modular type bell push in place of piano type bell push.

Wiring point for H.P.M.V./Sodium vapor lamp with 2.5sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with ]4 SWG copper earth continuity wire and 15 A piano type switch etc., complete in all respects including matching color wash.with modular type switch in place of piano type switch.

Providing and wiring of sub main with two number 1.5 sq.mm. FR PVC insulated 1100 V grade single core copper conductor cable in 20 mm dia. Heavy gauge rigid steel conduit on surface, with one no. 14 SWG copper earth continuity wire etc. Complete in all respects.

Providing and wiring of sub main with two number 4 sq.mm. FR PVC insulated 1100 V grade multi strand single core copper conductor cable in 20 mm. dia heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching color wash etc. Complete in all respects.

Providing and wiring of sub main with two number 10.0 sq.mm. FR PVC insulated 1100 V grade multi strand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching color wash etc. complete in all respects.

Providing and wiring of 4 number 6sq.mm. FR PVC insulated l100V grade multi strand single core copper conductor cable in 25 mm dia heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with reinforcement before concreting, with two no. 14 SWG copper earth continuity wire including matching color wash etc. Complete in all respects.

Providing and wiring of 4 number 16sq.mm. FR PVC insulated 1100V grade multi strand single core copper conductor cable in 40 mm dia heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with reinforcement before concreting, with two no. 10 SWG copper earth continuity wire including matching color wash etc. complete ill all respects.

P/F of LED Tube light with batten suitable for up to lx22 W LED tube light fitting including tube on surface complete in all respects. Cat-AAA

Providing and fixing of 36 Watt to 46 Watt in door Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast Aluminium housing body with extended heat sink and diffuser of Special polycarbonate material and driver set complete in all respect.

Providing and burying of safe earthling electrode T-39 copper Coated, Length 3000 mm, outer dia 76.30 mm x 3.2 inner 42.40 mm x 2.60 mm, terminal dia 12 mm outer pipe of 12 swg hot dip galvanized up to 100 micron filled crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm acquire C.I. frame with hinged cover & masonry housing . (From electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra)

Providing and fixing of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

P/F of 6/10/16/20/25/32 Amp. MCB (10KA). CAT-A

(a) P/F of 40 Amp. 4 pole isolator. CA 1-A

(a) P/F of 63 Amp. 4 pole isolator. CA 1-A

S&F of 40 Amp. D.P. Isolator.

S&F surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A.

S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A.

Errection and testing of ceiling fan and regulator for room height upto 3.5 meters including Providing of3mm thick G.I. rod 19 mm dia duly painted.

Errection and testing of exhaust fan and on the existing hole with suitable size of rag bolts, nuts and washers etc. complete in all respects.

P/F of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects.

P/F of power plug with 15 A/240 V flush type modular switch and 5 pin 15 A/240 V flush type universal socket in suitable M.S. box of 175 mm x 100mm x 50mm size with phenolic laminated Bakelite. sheet cover 3 mm thick fixed with brass m/c screw.

P/F of steel enclosure surface/flush mounting fitted with 20 A 2 pin and earth metal clad scrapping earth plug and socket complete in all respects. CAT-A

Providing and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0 mm thick ISI Marked G.P. sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zinc coated M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with Providing of all material, labour, T&P etc. required for proper completion of the work

P/F of call bell of approved make on polished MDFEG/Teak wood board including making connection etc.

apply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm. long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding. Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00. Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Providing, earthling etc. complete as required.

Providing and fixing following capacity TP&N disconnect or fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing and concealing of 25mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching color wash including cost of all material labour and T&P etc. required for proper completion of the works as per directories and to the satisfaction of Engineer-in-Charge.

Please Enable Macros to View BoQ information