Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.2 LAdmitted-Fee/PreQual/Technical/Finance | -27.50% | ₹2.2 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹2.5 L+₹36,244.39 (16.7%)Admitted-Fee/PreQual/Technical/Finance | -15.42% | ₹2.5 L+₹36,244.39 (16.7%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹2.8 L+₹61,507.45 (28.3%)Admitted-Fee/PreQual/Technical/Finance | -7.00% | ₹2.8 L+₹61,507.45 (28.3%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹3 L
EMD Value
₹6,000
Closing Date
9 Sept 2026, 6:55 pmClosed
Executive Engineer REW Pulwama
Executive Engineer REW Pulwama
FINDC2627101822-(DEVELOPMENT RENOVATION OF PANCHAYAT GHAR ARIPAL BLOCK ARIPAL)
2026_RDPR_322606_11
e- NIT No. 107/2026-27 Dated 27-08-2026
Open Tender
Civil Works
Percentage
45 days
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Pulwama
₹6,000
10 Sept 2026
27 Aug 2026
10 Sept 2026
27 Aug 2026
9 Sept 2026
27 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
Imported wood thickness of shutter in mm per sqm : 30 mm including glass panes 4mm thick comp.job | 2.93 | Sqm | 2,597.75 | ₹7,606.21 |
| 2 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported wood Rate per sqm 30mm | 2.6 | Sqm | 2,800 | ₹7,268.8 |
| 3 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:
Painting wood work with deluxe multi surface paint ofrequired shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture | 167.27 | Sqm | 147.05 | ₹24,597.05 |
| 4 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm | 207.43 | Sqm | 162.8 | ₹33,769.93 |
| 5 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:
Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture | 14.5 | Sqm | 142.05 | ₹2,059.44 |
| 6 | Providing and fixing of Aluminium fittings.100 mm Tower bolt | 6 | No | 63.35 | ₹380.1 |
| 7 | Providing and fixing of Aluminium fittings. 100 mm Handle | 6 | No | 60 | ₹360 |
| 8 | Providing and fixing aluminum work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections andAluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge | 107.8 | Kg | 514.5 | ₹55,463.1 |
| 9 | Providing and fixing of 600mm deep almirah of 19mm plywood with shutters incl. 0.8mm laminated dunmica/sunmica on exposed surface and paintig on all internal surfaces with back side of 12mm ply covered with unmica on external surfaces incl all necessary fittings like hydraulic locks, hinges, knobs, magnetic catchers, dulmica strips, screws/nails, adhesive, tower bolt, handles, etc, complete job as per directions of ingineer incharge | 14.03 | Sft | 5,500 | ₹77,165 |
| 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 5 mm to 25 mm | 29.29 | Sft | 57 | ₹1,669.53 |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
BOQ_1082486.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .