Restoration and Demarcation work of canal land from km. 0.000 to km 14.360 of Gosaiganj Dy. in district Lucknow. (LOT-02)

Amount

E/W in cutting for constructing channel manually or by tractor where ever possible and applicable for below 30 cumec discharge in all type of soil with all lift and lead upto 30M. excluding mechanical compaction but including of manual compaction and dressing to profile.

E/W in filling for constructing channel manually or by tractor where ever possible and applicable for below 30 cumec discharge in all type of soil with all lift and lead upto 30M. excluding mechanical compaction but including of manual compaction and dressing to profile.

Earthwork in correcting internal section of Tail Gule with all type of soil including all lead & lift and mannual compaction & dressing etc required for proper completion of work.

Earthwork in foundation with all type of soil including lead upto 30 M & lift upto 1.50 M with hard clay, charri, bajri upto 5%, excluding mannual compaction but including mannual compaction & dressing to profile for proper completion of work.

Providing & laying in cement concrete 1:2:4 (1 cement : 2 carse sand : 4 graded stone grit 20mm nominal size) including cost of material, labour and T&P etc. required for proper completion of the work.

Providing & laying C.C. 1:1:2 (1 cement : 1 coarse sand : 2 graded stone grit 20mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.

Centering and shuttering for RCC work including rent of shuttering material labour and T&P etc. required for proper completion of work for slab, lintels, sunshades columns and wall etc.

Mild steel or iron work such as reinforced concrete or reinforced brick work (when not including in overall rates) wrough to requiredshape as necessary including bending, binding, cutting and placing in position reinforcement including all cost of binding wire & supplied all steel and wastage overlapping & hooks

Dismantling brick work or stone work in lime or cement mortar including stacking of dismantled materials as directed by engineer-in-charge within a distance of 60M

Centering and shuttering for CC work including rent of shuttering material labour and T&P etc. required for proper completion of work for slab, lintels, sunshades columns and wall etc.

Providing & laying coarse sand layer 75mm thick including all cost of material, labour & T&P etc. required for proper completion of the work.

Supply, Laying and fixing 100mm CPVC Pipe

Finishing Piller with Acrylic smooth exterier paint of required side (New work)

Writing letter on boundary pillar above 50mm size but below 80mm

Earth work in making bandha & diversion with all type of soil including all lead lift & mannual compaction for complete work.

Earth work in correcting of internal section and removing bandha & diversion with all type of soil including all lead lift & mannual compaction for complete work.

Finishing wall with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all amterials, labour, T&P etc. required for proper completion of the work.

Supplying & fixing iron channel with cutting & making as required to repair the gate to complete the job

(i) Supplying & fixing Slaiding Channel off size (ii) Supplying & Fixing Top & Bottom Channel off size

Supplying & fixing thrust bearing (016 NBC)

Supplying & fixing of bearing box size 300x300x100

Supply and Fabrication of M.S Channel, steel gate manufactured with 8mm thick plate with frame of channel complete

Supplying and fixing angel iron for supporting of gate

Flat Iron for gate bracing

Providing and fixing G.I Pipes 50 mm dia complete with GI fittings and clamps i/c cutting and making good the walls etc.

Providing and fixing of bottom rubber seal after removing old and damaged rubber seal etc.

Greasing and oiling of the gate

Providing and fixing Nut Bolt 300mm X 15mm

Supplying & fixing CI Nut Heavy duty small size 100x15x50mm ring including turning threading up drilling complete

Providing and fixing Nut Bolt 65mm X 12mm

Supplying & fixing high quality 50 mm size dia. Spindle rod with making required Square thread on lathe machine to complete the job.

Arrangement of Generator Set, welding machine, gas cutter & other required T&P with mechanic, Welder, labour for cutting of various parts of gate & refitting of gate parts, including loading & unloading to complete the job.

Painting on gate plate two coat with black water resistant bituminous paint including one coat of primer after the cleaning surface properly including cost of all material labour T&P etc.

12 MM thick plaster in 1:4 with cement coarse sand including cost of material & labour etc.

M/s Nav Bharat Construction

AKANKSHA ASSOCIATES