Reconstruction of waiting hall burial shed and sinking of new borewell at athupalam hindu Burial ground in ward no.86, South Zone.

Amount

Cleaning the heavy jungle etc completed as per direction of officers

Earth work excavation for Foundation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-incharge.

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in, volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Ens ineer-in-charges.

Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., ‘complete complying with standard specification.

Supplying and Erecting and centering shuttering for sides and sofits of plain surface such as Rec slab rectangular , T beam lintel , bed blocks, staircase waist slab , etc. including strutting shuttering , and remaining same etc. complete as per drawing

RCC Column, Plinth Beam, Footing sides

Slab Soffit

Reinforced cement concrete M20 1:1.5:3 granite metal by volume characteristic strength not less than 20N/sqmm) machine mixec for all reinforced cement concrete works, including scaffolding cost of all materials, machine mixing, vibrating, lifting, curing labour charges for laying & finishing etc., but excluding the cos and fabrication of reinforcements and also excluding centering an formwork etc., complete complying with relevant standar specifications at all leads inside the building.

Supplying, cutting, bending and placing of reinforcement stel of MS, HYSD bars for all type of RCC works at all levels includin cost of 18 gauge GI binding wire cost, labour etc., as per desig! and details complete.

Fly Ash Brick work in cement mortor 1:5 mix (one cement,five sand) using II class country bricks to a size of 9"x4 3/8"x2 3/4 including cost and conveyance of all materials and labour charge: for mixing the mortor, constructing, curing to required period anc wherever the masonry projection is necessary for elevation shal be done with out extra cost etc complete as per std spn.uptc basement

Supplying and filling in foundation and basement etc., with filling Well Gravel in layers well watered, rammed and consolidated etc.. complete complying with standard specification and as directed by department officers.

Plastering in Cement mortor 1:5 (One cement, Five sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor and the surface rubbed for smooth and curing to required period etc., complete as per standard specification.

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Supply and fixing of mild steel door using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc.,

Supply , fabrication and fixing of MS Square Rods,MS flats, MS Angles ,Gates, name Board etc complete

Painting new iron work for doors, windows, grills, weld mesh sceens etc., two coats over one coat of primer

Paying the floor with Granite Slab (super fine polished with machine cut edges) of sizes 1.2m x 0.60m and above of 18mm to 20mm thickness in ail floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the marble slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete. For Synthetic Grey, Paradise and Similiar varieties Colour

Supplying and fixing with galvanished iron sheet (corrugated) 24 gauge thick including necessary bolt, nuts and bitumen washed etc., completed - 10 m2

Painting with Enamel paint top two coats including etc., complete over new Plastered Surface Painting with Enamel paint top two coats including etc., complete over new Plastered Surface

Provision for Geologist from the TamilNadu Agricultural University for inspecting the site and for making the borewell point as per departmental officers instructions etc. complete .

Drilling of borewell 150 mm dia vertical bores depth as directed by the departmental officers including labour charges for inserting Causing pipe assembling in the drilled holes including welding, jointing, grouting the casing pipe etc.,as per departmental officers instructions etc. complete .

Supply of 150 mm dia (inner) PVC casing pipe suitable wall thickness including erection and welding including the cast of coupling etc complete.

Drilling of borewell 100 mm dia vertical bores depth as directed by the departmental officers including labour charges for inserting Causing pipe assembling in the drilled holes including welding, jointing, grouting the casing pipe etc.,as per departmental officers instructions etc. complete .

Supply and delivery of borewell 2.0 HP submersible pumpset at the characteristics head of 50x225m double cable motor compactable with star delta panel board only with vertical type with all accessories with latest FS 8034 year 2021-2022 in general for the following duty conditions the pumpset should have diagonally balanced bronze impler and stainless shaft for motor as per departmental officers instructions etc. complete .

Supply and delivery of direct online starter confirming to 1S13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(+ 5%) and 230 V(4+10%) including Ammeter, Voltmeter Thermal

Supply for 4mm2x3 core copper insulated flat cable as per departmental officers instructions etc. complete .

Labour for the erection of submersible pumpsets in borewell including fixing and jointing submersible cable with proper claps upto the starter to the required depth and also fixing of riser pipes to the required depth values erection clamps, pressure gauge as per departmental officers instructions etc. complete .

Supply and delivery of the following Well water materials approved brand as per list with ISI marking and an approved by corporation Officers.

40mm UPVC Column Pipe

40mm UPVC Coupling

40mm GM Non return valve

40mm MTA

40mm FTA

40mm Union

40mm x 32mm Reducer

32mm UPVC Pipe

32mm UPVC Cupling

32mm UPVC Elbow

32mm UPVC Union

25mm GM Gate valve

borewell cover

150mm borewell clampset

Panel Board Bed Civil work

HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B (ScH.No.62) (P.No.22)

Plain Cement Concrete 1:3:6 (one cement, three fine aggregates and six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per Standard specification

Supply and Fixinf of HDPE 2000 Lit Tank etc., complete as per the direction of officer incharge

UPVC Pipes and Specials

25 mm UPVC Union

25 mm UPVC Pipe

25 mm UPVC Coupler

25 mm UPVC Elbow

25 mm UPVC Tee

25 mm UPVC MTA

25 MM Gate Valve

25 MM UPVC Union

25 mm UPVC FTA

25 mm Tap

25 mm UPVC End cap

Laying Jointing of UPVC Pipe with suitable specials etc., Complete

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per coil). (SD 25)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter lockingWall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with Suitable colour for concealed PVC plug point.(SD 38)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colourr (SD 54)

Supply and fixing of recess mounted 40W LED down lighter with suitable accessories.

Supply and fixing of AC ceiling fan 1200MM ( 48" )sweep with 300MM down rod ( without regulator )( crompton make ) (SD 110)

Supply and run of 4 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class ‘B') bent at both ends with necessary angle iron up right and end supports for mains (SD 72)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (SO0V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 127)

Supply and Fixing of Roof Air Aluminium Roating Drum Ventilator etc., complete.

Supply and Fixing of 30W LED Street light fitting with LED (Lower end) with 25mm dia. GI Pipe (Class B) with 1 no 25mm GI Bend complete on the existing post / on wall with PVC Unsheathed copper leads with MS Clamps and with painting.

M RAMARAJ (BID ID -1167825)