WORKS SERVICES FOR PROVISION OF EJECTION SEAT BAY

Amount

Demolition of stone/Brick masonry built-in cement mortar including all quions arches, pillars etc complete all as specified and directed.

Demolition of cement concrete of any description & in any position etc complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, Complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Complete all as specified and directed.

M&L for painting new steel surfaces of any description including preparation, priming with red oxide zinc and two coats of synthetic enamel paint, width or girth over 10cm not otherwise described, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specifed and directed.

S&F 6 mm thick poly carbonate sheet, plain colour, fixed with self tapping screw, incluidng PVC beading on joints, approved pattern in blue and white colour, complete all as specifed and directed.

Providing and fixing in position, 100 mm thick factory made expanded polystyrene core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated GI wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connnected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 50 mm thick EPS of density not less than 16 kg/per cum. Both the outer faces of the panel shall be finished by applying the layer of 25 mm thick cement mortar 1:3 {1 cement 3 course sand (not having more than 40% stone chips of size upto 6mm)} with the help of shotcreting/ guniting equipment etc at a pressure not less than 1 bar (100KN/sqm) and plastering both surfaces as per zonal specification (internal and external) finished with trowel.

Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. Note: The work aginst this item shall be got executed through OEM or his authorised executing agency after approval of GE. The Contractor shall submit test reports and manufacturers certificate for materials, concrete mix design details etc and the cost the same shall be borne by the contractor. Make: ALPHA PEB/RAPIDCON/JSW/SRISTI VENTURES

M&L for 100 mm thick Cement concrete , 1:2:4 type B-1, (20 mm graded crushed stone aggregate) as in sub floors, complete all as specified.

M&L of Screed bed of cement mortar 1:6 or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed.

S&F light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed.

S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,as skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match vertical surfaces including 10 mm rendering as in backing coat in CM 1:3 complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on other than fare faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement to receive the linoleum sheet complete all as specified and directed.

S&F 3.2/3.30 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting sealed down with an approved adhesive complete all as specified and directed.

S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and fixing 600 x 600 x 16 mm mineral fibre ceiling tiles of Classic lite RH99 complete all as specified and as directed. Make- ARMSTRONG/EVEREST/CHARMINAR

M & L for preparation of old wall surfaces and applying one layer of 3mm thick internal wall care putty, complete all as specified and as directed Make: Birla / JK wall putty

M & L for two coats of oil bound distember over one coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed

Material & Labour for applying Two Coats of 100% Premium acrylic emulsion paint on old surfaces of external walls/soffits, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm surfaces incl comlete removal of existing treatment, cleaning, preparation & filling crack filler on cracks or wherever required (crack filler cost is included), making smooth/good on old external wall surfaces. Make- ASIAN/BERGER/NEROLAC

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area exceeding 2.00 sqm each

S&F Powder Coated aluminium door shutters (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Make- HINDALCO/JINDAL/INDIAN A1 company Note: Glass will be measured and paid seperately.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cluding cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all omplete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. Make- HINDALCO/JINDAL/INDIAN A1 company

S&F Aluminium extruded section body, Door closer hydraulically regulated, deisignation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. Make- HINDALCO/JINDAL/INDIAN A1 company

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panelfixed to alluminium frame works with neccessary rubbber bedding complete all as specified and directed.

S&F for 12mm thick both side choice laminated prelaminated particle board for insulation purpose, fixed to aluminium framework, complete all as directed by Engr-in-Charge.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete.

M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and intle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed.

S& F 150mm bore UPVC pipes (Sch - 40) including fittings , jointing, fixed to walls , complete all as specified and directed. Make- PRINCE/ FINOLEX/ SUPREME/ BIRLA AIRCON

Preparation of old surface and applying one coat of oil bound distempering on walls. Note : Preparation including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots, removing of nails, cracks making good holes by putty etc, spreading and removing coverings to doors, windows, floors fittings to protect them from splashes, washing floors, cleaning glass, joinery, fittings, drops, splashes, leaving premise clean and tidy etc. complete all as specified

Removing building materials out side of MOD land with as per guideline issue by local municipal authority / state govt all as specified and directed.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, incl mild steel terminal boxes modular switches & plates including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point /Fan point controlled by one switch.

All as per item No.31 above One 5 Amps socket point on independent board.

All as per item No.31 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed

S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.

S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed.

S&F modular White cover plate with frame 3 module complete all as specified & directed

S&F modular metal flush box 3 module complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC)

Supply and fixing in repair 36W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified.

Supply and fixing of Endura Citylite Platinum, 45 W LED Street Light fittingpressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection incl suitable GI bracket of 32 mm dia complete all as specified and directed.

M & L for sub main wiring complete with two runs of 2 x 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including MS ERW conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M & L for sub main wiring complete with two runs of 2 x 2.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including MS ERW conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

Supply and fixing flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 10 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc duly tested & certified by CMRI-Dhanbad complete all as specified and directed.

Supply and fixing flame proof/weather proof switch socket and plug combined in LM6, 16 A 240 Volts 2 pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 alluminium alloy/cost iron neoprene gasket dgree of protection IP-65 certified by CMRI Dhanbad complete all as specified and directed.

Supply and fix LED light fitting 1x40 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Make- PHILIPS/ HAVELLS/ WIPRO/ BAJAJ

Supply and fix Flameproof ceiling fan of 48" sweep incl fan regulator and all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S & F MCCB DB Vertical TPN 4 Way 'A' Frame,Including MCCB TPN 63 Amp Beaking capacity 25KA -01 nos, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing complete all as specified and directed.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore light gradeGI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009 complete all as specified and directed.

Supply & fix GI earth wire 4.00 mm dia for interconnecting of earth electrodes complete all as specified and directed.

Supply and install hi wall split units air conditioner indoor/outdoor of capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2 complete all as specified and directed. Make-VOLTAS/CARRIER/HITATCHI/DAIKIN

Supply & fix AC load manager with built in programme for on/off of 2 Nos of 1.5 TR/2 TR capacity split type ACs suitable for operating on single phase 230 volts all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M&L for mild steel stand (Factory made) duly painted suitable for fixing 3/2/1.5 TR AC out door unit fixing in wall / floor, including making bore required size for copper pipe & copper cable with sweating pipe required size and length upto ground level complete all as spcecified and directed.

S&F single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos double pole MCB 20 Amps capacity complete all as specified and directed by Engr-in-charge

Supply, install, commissioning and testing of commercial air curtain unit of size 40" x 78" for prevention of dust and conditioned air losses, single phase, 220V, 50 Hz, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS-CRC 18 gauge square perforated suction grills, aluminium alloy fans and single phase electric motor, nozzles etc complete with fittings and accessoires so as to produce 1-1.5 m/sec air velocity at floor level for door opening as specified. Make- AIRCON/ALMONARD/CG

Supply and fix Ese type lightening arrester system complete with GI and air termination rod with base plate, support wires from all sides incl nut bolts and accessories incl testing complete all as specified and directed.

Supply and fixing aluminium strip 25 mm x 3.15 mm complete with saddles/ insulators and fixing screws as roof conductor complete all as specified.

Supply and fixing GI strip 32 mm x 6 mm complete and buried in ground as ground conductor complete all as specified .

Supply and fix Tubes light grade galvanised of size 40 mm with all fittings and fixed complete for suuporting the air temination rod and protection of GI strip complete all as directed

M & L for PCC (1:2:4) type C-1 (using 20 mm aggregate) as fixing of pipe on roof for air teriminators etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified and as directed.

M & L for Test point terminal block made of gun or phosphorus bronze size 75 x 75 x 25 mm, drilled and secrewed including 3 nos 8 mm dia 25 mm long hex. Head screw complete all as directed complete.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 3.5 core x 70 Sqmm (From Existing Hanger No 9 Panel to Proposed Ejection seat bay)

M & L for DWC Pipe of size 90 mm dia for protection of cables to be laid under roads, crossings/culverts/ on walls complete all as specified and directed.

Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed by Engineer-in-Charge

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations for electric poles, filling and mass concrete complete all as specified and directed.

PRAGATHI BUILDERS (BID ID -3314382)

Moulya Builders (BID ID -3315270)