SPECIAL REPAIRS TO ROAD FROM J-159/2 TO RSI CIRCLE AND CONNECTED BUNGALOWS UNDER GE(NORTH) SECUNDERABAD

Amount

M&L Premix bituminous, paving bitumen any penetration laid/rolled macadam with binder content of 4% by weight of total mix using paving bitumen (VG-30)and compacted to required gradient and camber (consolidated thickness 75mm or less)

Repairs to pot holes of any depth and n exc 1 Sqm each incl sweeping free from dust and mud, water scoring sunken surfaces in roads, paths etc cutting around edges at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm using paving bitumen (VG-30) putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (inc supply of premixed macadam, binder and chipping). depth of potholes exc 30mm complete all as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a tack coat of paving bitumen primer at 5 Kgs/10 sqm all as specified and directed

Bituminous premixed semi dense asphaltic concrete, 30mm consolidated thicknes with 5.5% binder content(paving bitumen) by weight of total mix, mixed in hot mixed plant, rolled and compacted to required camber and gradient by using mechanical paver complete to be uniform surface all as specified and directed.

M&L milling the bituminous pavement surfaces upto a depth of 30 mm using milling machine to make a uniform surface without disturbing the base and cleaning the milled surface including cost of all labour charges and hire charges of machineries etc complete including stacking the milled material on the side of road/where directed including all leads & lift as directed by Engr-in-charge. (Note:After milling, the loose portion shall be filled with Bituminous Mecadem).

M & L for painting lines, dashes, arrows, letters etc on road surfaces / over speed breakers exc 10 cm wide, with thermoplastic road marking paint, spray machine, preparing black top surface including fanning out dust and any other foreign matter complete all as specified and directed.

S&F in repairs Alcolite metal delinators for road of length 1200mm, highly reflective reflector made out of mild steel provided for better reflecting including necessary excavation of size (300x300x300mm) and fixed with PCC (1:3:6) all as directed by Engr-in-Charge. (Model No : IRC 2019 of Alcolite brand)

S&F solar road pavement markers ( solar stud) AK 970 of Aktion make or an equivalent in 3M / Mr. Illumination fixed on bituminous/ concrete surfaces as per manufacturer instructions complete as directed.

S & F road cat eyes of approved make pasted with the adhesive as per manufacturer instructions. Make: 3 M of series 290 C or equivalent in Mr. Illumination/ Dark eye / Aktion as approved by GE.

M&L 100mm thick(Spreaded thickness) approved moorum/red bajri for berms including spreading,levelling,watering and rolled with hand roller of .2 to .5 tonne capacity to required camber and gradient complete all as directed . Note : Moorum shall be brought from out side MD land.

M&L for rubber based speed bumps of dimensions 500x420x75mm with reflective arrow stickers on both side with combination of approved colours ( black and yellow) fixed with necessary bolts etc., complete all as specified and as directed

Preparation of old concrete surfaces and applying two coats of Synhteic enamel paint any description over 10cm girth or width not otherwise described, complete all as specified.

Preparation of old concrete/bituminous surfaces and applying two coats of radium paint of colour as approved by GE of any description over 10cm girth or width not otherwise described, complete all as specified.

S&F in repairs Road junction / information sign board, (4 feet x 2 feet) prepared on both side 3 mm thick ACP sheet fixed on SS framework of square tube (25x 25x 5 mm) as per manufacturers instruction including reflective sheet HIP (3M or equivalent Make with 3 year warranty certificate), border/ letters/ numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection. The framework shall be welded on 2 Nos vertical post of 50 mm dia mirror polished SS pipe of 304 grade welded with holdfast 2 Nos of flat Iron (40x6 mm) 150 mm long . Height of board shall be 2.55 m above GL and 0.45 m below GL and including necessary excavation of size in 0.60 x 0.60 x 0.75 m size and PCC 1:3:6 type C2 foundation (Spec. IRC 67) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc .complete all as specified and as directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for(un-rainforcement) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for cement concrete type C2,1:3:6 using 40mm graded stone aggregate as in embedding of post etc,

Supply and fix joist, channel, angle or tee sections, fixed independently , without connection plate etc cut to ordinary length within 20mm of the length conforming to Fe 410-W (Gde E-250 quality-B) complete all as specified and as directed

S&F Plates (plain or chequered )channels, square cut or notched(ordinary and counter sunk)forming holes, without anyattachment etc.Roof strusses (framed) and connecting plates, etc., including necessary precautionary measures as in supports etc., as directed by the engr-in charge.

Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 Cm long but not exceeding 10 cm long , 5 to 10mm dia of neck as specified and directed.

M&L for preparation of new steel steel / concrete surfaces and applying two coats of radium paint of colour as approved by GE over a coat of primer of any description over 10cm girth or width not otherwise described, complete all as specified.

M&L for 3M high intensity reflecting tape, 50mm wide of colour as approved by GE fixing over steel/ concrete surfaces including all adhesive materials etc. complete all as specified.

KASHISH CONSTRUCTIONS (BID ID -3488532)

B Sreepathy Rao (BID ID -3485704)

BNS INFRA AND DESIGN (BID ID -3485682)

BSA INFRA (BID ID -3485881)