SPECIAL REPAIR TO BLDG NO T- 50 AND T-51 (TOILET BLOCK), T-127 AND P - 40 (COOK HOUSE ) AND TOILET BLOCK NEAR BLDG NO T- 121 AT OD COMPLEX UNDER GE (EAST) MATHURA

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Pressed steel frame for doors of size 125 X 60mm frabicated out & 1.25mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 X 60mm fabricated out & 1.25mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed.

M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L for Powder coated aluminium(minimum thickness of powder frame coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as specified and as directed.

M&L for Aluminium frame (sliding, fixed or casement) powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement complete all as specified and as directed.

M&L for 5 mm thick sheet glass ordinary quality and glazing with aluminium beading n exc 0.50 sqm in each pane complete all as specidfied and as directed.

M&L for 75mm powder coated aluminium barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F 100 mm Butt hinges, extruded aluminium alloy, with aluminum steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. ccomplete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L PCC 100mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, m a c h i n e pressed built with grey cement and no pigment ; set jointed and pointed in neat cement slurry in floors/ roof slab and cut and polished over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 & filling the joints with groutex Complete all as specified and directed.

M&L for Chequred Cement concrete coloured tiles glossy finish, rubber moulded with grey cement and pigments 20cm x 20cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, with and including 20 mm thick screed bed in CM 1:4 Complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundation incl watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and as directed.

Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate as in levelling course for flooring complete all as specified and directed.

M&L for Non skid Ceramic coloured joint free tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and as directed.

M&L for light shade Vitrified double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Ditto all as per above item 31 but on vertical surfaces over and including 10mm thick cement screed in CM 1:3 complete all as specified.

M&L for 20mm thick Granite (of any type) work black colour as specified by Engg-In-Charge (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for 50mm thick PCC M-10 grade (Nominal mix) using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & smooth (without using extra cement) complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.

Supply only Liquid water proofing compound of complete all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:4 on fair faces of brick work or concrete surfaces and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete complete all as directed and as specified

M&L for Providing, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab as directing mixed with liquid water proofing compound Complete all as specified and directed.

Dismantling of AC corrugated sheets in roof covering including ridges, hips, valleys etc complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of red colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and directed.

Dismantling timber scantlings (framed work) exc 40 Sq Cm in section, in any position complete all as specified and as directed.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed by Engg-In- Charge.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights complete all as specified and as directed .

M&L for 4 mm thick non-asbestos fibre cement building board having fire resistance & moisture resistance properly complete all as specified and as directed .

Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with capstan heads, screwed down, screwed for 15 mm bore dia iron pipes complete all as specified and as directed.

S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia iron pipes complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F in repair brass chromium plated Towel Rail 600 mm long complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 100 mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair stainless steel Grating doom 100 mm dia with or without hole complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but angle back of size 430 x 370 x 340 mm (minimum) complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including taps waste chain and plug but including bracket fixed in repair complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed

Supply and fix in repair 750 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and as directed

M&L for prepration of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of distemper oil emulsion including over and including a coat of alklai resitant primer complete all as specified and as directed.

M&L for preparation of new plastered surface of walls/ceiling and applying two coats of weather proof acrylic exterior paint over and including a coat of primer (100% acrylic) complete all as specified and as directed.

M&L for preparation of old decorative surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

MM&L for complete removal of existing treatment of wall & preparation of old plastered surface of walls and applying one coats of weather proof acrylic exterior paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one pink primer complete all as specified and as directed.

M&L applying two coats of cement base paint, white or tinted on new wall surface over a coat of primer including preparation of surface complete all and including as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash on wall surface complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed.

Dismantling of existing roof treatment consisting of screed, tar felts / etc, and removal of dismantled materials complete all as directed and as specified

M&L for applying cold bituminous primer @ 0.30 ltr/sqm conforming to IS-3384 laying 03 mm thick APP Polymer modified membrane, weighing 3.5 Kgs/sqm in weight with non-woven polyester reinforcement and sealing all the overlaps of 100 mm in length side and 100 mm on width side all complete and all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out complete all as specified.

Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm int dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed

M&L for PCC 1:4:8 type D-2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm int dia of pipe complete all as specified and as directed.

M&L for Salt glazed stoneware drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

Construction of Soakage well of 1.80 mtr dia and 3.0 mtr deep complete all as specified and as shown in drawing No CEJZ/2004/S-35 sheet 1/1 dated 11 May 2004 (Revised 06-08-2005) which includes the following:- (i) Excavation and earth work, including R/F and removal of surplus soil. (ii) Cement concrete in foundation, brick work honey comb brick work. (iii) Reinforced type A1, 1:1 1/2:3 form work, reinforcement (iv) Precast cover slab type A1, 1:1 1/2:3, plastering, filling brick agreggate and all Pipes and fitting complete all as shown in drawing as specified and as directed.

Construction of septic tanks including excavation in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab, reinforcement, including RCC manhole covers, CI vent shaft and sludge chambers etc, for 25 users complete all as specified and shown drawings No CEJZ/204/TD/S- 17

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. ( Note: Credit for above items should be made as per credit Schedule separately)

Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap incl all type of MCB and making good disturbed surface / wall as per existing complete all as specified and directed

Point wiring with 1.5 Sqmm single core PVC insulated unsheathed (FRLS) cable 1100 volts grade with mulistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic PVC conduit with all accessories such as internal bend end caps etc complete concealed in wall/ceiling/roof/etc by means of suitable GI saddles/Spacers and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor, fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls with 3mm thick bakelite top cover sheet, ISI maked with chrominium plated screws and cup washers for housing the switches, socket outlets, fan regulators etc, all as specified and as directed for the following:- a) One light/ fan/ exhaust fan point controlled by one way switch 5 amp complete.

b) One 3 pin 5 Amps socket point controlled by one way switch on same board.

c) One 3 pin 5 Amps socket point controlled by one way switch on independent board.

All as per item No. 4 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed .

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed .

Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed .

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed .

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed .

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed .

Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed .

S/F Modular White cover plate with frame, 1 module complete all as specified and as directed .

S/F Modular White cover plate with frame, 2 module complete all as specified and as directed .

S/F Modular White cover plate with frame, 3 module complete all as specified and as directed .

S/F Modular White cover plate with frame, 6 module complete all as specified and as directed .

S&F Modular White cover plate with frame, 8 module complete all as specified and as directed .

S/F Modular Metal flush box 1/2 module complete all as specified and as directed .

S/F Modular Metal flush box 3 module complete all as specified and as directed .

S/F Modular Metal flush box 6 module complete all as specified and as directed .

S/F Modular Metal flush box 8 modules complete all as specified and as directed .

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed .

Supply and fix LED T-5 intergrated Batten PC housing extruded 2' light fittings 9W complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed .

S& F in replacement of recess mounting LED light fitting 2x2, square shape 24W. 230V, complete with all accessories internally prewired and including connected up to with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed .

Supply and fix LED retrofit lamp 9 Watt complete all as specified and as directed .

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed .

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description complete all as specified and as directed .

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete with down rod , replacement of capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and hanging / refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as specified and as directed . NOTE:- The spare parts Capacitor & Rubber wheel bush shall be included in the quoted rate.

M & L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire complete all as specified and as directed . Note: Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM.

S&F TP&N Verticle loadline distribution board, 4 way, Double door, sheet steel, phosphatised, powder painted with copper bus-bar 250 Amp, two neutral bar, two earth bar with provision for 63 Amp MCCB as incomer and SP/TP MCBs as outgoing, cable ties for cable management, 440 V, 4 way complete all as specified and directed. Note:- MCB & MCB / MCCB DBs shall be of same make and measured and paid seperately under rspective items of Sch 'A' DB shall be fixed in surface / flush pattern by cutting the wall and making good disturbed surface as per directed & rate shall be included in the items.

S&F MCB distribution board, SPN 6 way, Double door, sheet steel, phosphatised, powder paited with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, complete all as specified and as directed .

S&F MCB distribution board, TPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed .

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed .

S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed .

Supply and fix SP enclosure modular type, with a two pin and earth plug and socket complete with Single Pole MCB of rating 20 Amps, 240 Volts complete with all conction as directed.

Supply & fix in replacement of MCB DP 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fix in replacement of MCB TPN 63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fix in replacement of MCB TP 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fix of MCCB 63 Amps,' C' series , bracking cap 16KA, 4 Pole, 415V complete all as specified and directed.

Supply & fix in replacement of MCB SPN 32 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' B' series ,bracking cap 10KA, 240V complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminum conductor of size 35 Sqmm 3.5 core laid in trenches / duct / fixing on walls / poles including connecting with suitable lugs, glands, nuts and bolts in existing panel from pole / main panel box and testing complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminum conductor of size 10 Sqmm 2 core laid in trenches / duct / fixing on walls / poles including connecting with suitable lugs, glands, nuts and bolts in existing panel from pole / main panel box and testing complete all as specified and directed.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and as directed .

Supplying and laying reinforced precast concrete cable cover class LV type 1 with flat size 250 mm x 150 mm x 40 mm complete all as specified and as directed .

S&F steel tubes light grade galvanised with all fitting such as clamps, nuts and bolts, washers etc fixed to walls/floors/poles/road crossing etc of following sizes 40mm dia bore complete all as specified and as directed .

Earthing complete all shown as electrical plate No -03 of MES Sch part -I complete all as directed and as specified including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery incl necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.

mh enterprises

ARCHI ENGINEERS

M/S ANIL KUMAR

36SHRI RADHEY ASSOCIATES

JWALA ELECTRIC CONTRACTORS

KRISHAN KUMAR GOVT CONTRACTOR

BHARDWAJ CONSTRUCTIONS