Development of Saraighat Lake at Amingaon, Kamrup, Assam

Amount

SURFACE DRESSING AND JUNGLE CLEARING: Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : 2.13.1 Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia

Excavating trenches of required width for pipes, cables, etc, includingexcavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia

Embankment Construction with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2 (Including cost of testing of materials at site and laboratory as directed by the deptt.) (i) from private land

Embankment Construction with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2 (Including cost of testing of materials at site and laboratory as directed by the deptt.) Extra lead beyond initial lead of 3.0 Km.

Removing , derooting & disposing of water hyacinth , water bond vegetation trees etc and desposing the same outside of the proposed park premise.

EARTHWORK : Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil.

Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth exceeding 3 m but not exceeding 4.5 m

PLINTH FILLING: Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Raising low site including around the building with approved soil obtained from outside by truck carriage within initial lead of 8.00 km including breaking clods, dressing etc. complete including paying necessary land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly countersigned by D.F.O. concerned).

ANTI-TERMITE TREATMENT: Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Treatment of soil under floors and plinth using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

PLAIN CEMENT CONCRETE WORK: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

PLAIN CEMENT CONCRETE WORK: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc and removal of form workFoundation, Footing, bases for column

DAMP PROOF COURSE : Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Centering and shuttering including strutting, propping etc. & removal of form at all heights and levels. : In foundations, footings, bases of columns, pile caps, sides of mass concrete etc.

Centering and shuttering including strutting, propping etc. & removal of form at all heights and levels. : Walls ( any thickness) including attached pilasters, butteresses, plinth and string courses

Centering and shuttering including strutting, propping etc. & removal of form at all heights and levels. : In suspended floors, roofs, including slopping roofs, landings and balconies / projections Chajjas and cast-in-situ shelves.

Centering and shuttering including strutting, propping etc. & removal of form at all heights and levels. : : In lintels, beams, girders, bressummers & cantilevers including sloping beams

Centering and shuttering including strutting, propping etc. & removal of form at all heights and levels. : In column, pillars, posts & struts.

Providing and laying Reinforced cement concrete for construction of piers, abutments, portal frames, pier caps and bearing pedestals and seismic arresters over pier/ abutment caps at all locations with specified grade using Ordinary Portland Cement (conforming to strength requirement of IS:8112) including the cost of steel centering and shuttering etc. complete, including testing of materials etc. for casting pier & pier cap in one/two stage, necessary tools, plants, machinery and all related operations as required to complete the work as per drawings and Specifications with all leads, lifts and depths true to level and position but excluding the cost of providing reinforcement. Reinforcement shall be measured and paid separately. : Reinforced Cement Concrete -M-50

Extra for laying reinforced cement concrete in or under water and/ or liquid mud, including cost of pumping or bailing out water and removing slush etc., complete.

REINFORCEMENT: :Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. : Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

REINFORCED CEMENT CONCRETE WORKS : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

REINFORCED CEMENT CONCRETE WORKS : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

DESIGN MIX CONCRETE WORKS: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level : Concrete of M25 grade with minium cement content of 330 kg/cum.

DESIGN MIX CONCRETE WORKS: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charg All works above plinth level upto floor V level.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. : Brick on flat soling.

RANDOM RUBBLE MASONRY: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm

MS GRILL : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

FLOORING: Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

VITRIFIED FLOOR TILES : Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 1000 x 1000 mm

UPVC DOOR: Providing and fixing factory made uPVC white colour casement/ Casement having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. : Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash ............, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes f......................Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).

ALUMINIUM FITTINGS: Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm X 16mm.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : Tower bolt 300x10 mm

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

STEEL WORK: Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes

STEEL WORK ( GATE): Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

FAN HOOK : Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

STAINLESS STEEL RAILING: Providing and fixing stainless steel ( Grade 304) staircase with railing, balusters, rail etc (railing, balusters, rail etc. are to be measured and paid separately ) made of Hollow tubes, channels, plates / perforated plates ( thickness not less than 1.25 mm ) including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i.e. fixing the stair with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, to already casted R.C.C. / P.C.C.floor / beam with suitable arrangement to fixing the flights in proper location as per the drawing and instruction of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

TERRACING:Providing and fixing on wall face un-plasticised Regid PVC rain water pipes with all fittings and fixing clips conforming to IS:13592 type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with all accessories as bend, door, horn bend,shoe etc. complete as directed : a) 110mm dia single socketed pipe

PLASTERING AND FINISHING: 12mm thick cement plaster on even surface of wall with cement mortar 1:4 ( 1 cement : 4 fine sand).

15mm thick cement plaster on rough side of single or half brick wall of Mix 1:4 ( 1 cement : 4 fine sand).

6mm plaster to ceiling and beams in cement mortar 1:3 ( 1 cement : 3 fine sand).

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

WALL PUTTY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

EXTERNAL PAINTING; Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) overand including priming coat of exterior primer applied @ 2.20kg/10 sqm.

EXTERIOR FINISHING: Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

PRIMER ( STEEL ): With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

PAINT (STEEL ): Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Painting with DUCO PAINT of approved brand and manufacture to give an even shade:

INTERNAL PAINTING (PLASTIC PAINT): Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

CEMENT PRIMER: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with water thinnable cement primer.

Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes metre

100 mm diameter pipes metre

Providing and laying full body Vitrified Tiles Applico series of size 800mmx2600mm with thickness 15mm, ( IS 15622: 2017 group BI a) approved make in colour such as terastone Ivory laid on cement morter 1: 3 ( 1 Cement : 3 Coarse sand Jointing with grey cement slurry @ 3.3 kg/sqm including pointing joints with white cement and matching pigment etc., complete. designed for outdoor environment and heavy vehicle parking.

PILING WORKS : Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). 450 mm dia piles

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. Single pile upto 50 tonne Safe capacity Initial test (Test Load 2.5 times the Safe capacity)

Routine test (Test Load 1.5 times the Safe capacity)

Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on pile : 20.8.1 Upto 50 tonne capacity pile

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Supplying and stacking at site. Stone screening 11.2 mm nominal size (Type B)

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

COLOURED PAVER BLOCK: Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

KERB STONE: Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying full body Vitrified Tiles Roman series of size 600mmx600mm with thickness 9mm, ( IS 15622: 2017 group BI a) approved make in colour such as terastone Ivory laid on cement morter 1: 3 ( 1 Cement : 3 Coarse sand Jointing with grey cement slurry @ 3.3 kg/sqm including pointing joints with white cement and matching pigment etc., complete. designed for outdoor environment and heavy vehicle parking.

Providing and laying full body Vitrified Tiles Applico series of size 800mmx2600mm with thickness 15mm, ( IS 15622: 2017 group BI a) approved make in colour such as terastone Ivory laid on cement morter 1: 3 ( 1 Cement : 3 Coarse sand Jointing with grey cement slurry @ 3.3 kg/sqm including pointing joints with white cement and matching pigment etc., complete. designed for outdoor environment and heavy vehicle parking.

Providing and laying TACTILE of size 300mm x300 mm with thickness 12mm approved make in colour such as yellow & terracota laid on cement morter 1: 3 ( 1 Cement : 3 Coarse sand Jointing with grey cement slurry @ 3.3 kg/sqm including pointing joints with white cement and matching pigment etc., complete. designed for outdoor environment.

KERB STONE: Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)

FENCING: Supplying , fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x 4 points at 75mm apart with angle iron intermediate fencing posts not more than 1800mm apart and straining and end post etc. as necessary to be fitted with straining eye bolts and staples etc.complete as directed, specification of the angle iron post as given below. (a) Intermediate post 35mm x35mm x5mm x1800mm long bottom torched and duly slotted.(b) Straining post 65mmx65mmx6mmx 1820mm long with 2 stays of 35mmx35mmx1520mm long and 3 base plates 200mm x 200mm x 5mm, duly slotted to take eye bolts etc.(c) Corner posts 65mmx 65mmx 6mm x1820mm long with 2 stays of 35mmx 35mmx 5mmx1 670 mm and 3 base plates 200mm x 200mm x 5mm,duly slotted to take eye bolts etc.(d) Straining or end posts 65mmx 65mm x 6mmx 1820mm long with 1 stays of 35mm x 35mm x 5mmx 1820 mm long with base plates 200mmx 200mm x 5mm, duly slotted to take eye bolts etc.(All the angle iron posts to be embeded 600mm in C.C.pillars of size 300mmx300mmx600mm in prop.1: 3: 6 and one coat of anticorrosive ready mixed painting to all iron works) including excavation of foundation trenches for C.C. blocks and refilling and removal of surplus soil after completion of works.

GAEDEN CHAIR: Supplying and Installation of Garden Seating of minimum overall dimension of 1550mm x 850mm and height 600mm (fixing height 400-450mm) made out of MS structure (pipe,flat,etc where applicable) welded and finished smooth. The finishing should be of weather proof powder coating of pipe end should be of weather proof powder coating of approved colour. All the joints, hole, opening of pipe end should be water proof. The successful bidder need to get approval of physical sample from the authority before finalization of the bench. The rate is inclusive of fixing the chair in position including civil works.

Oudoor Children playing equipment. Supplying, installation, testing & commissioning of multi activity play system of reputed brand or manufacturer made out of GI/ MS :- Class B and conforming to IS-1239. LLDPE Plastic :-UV Stabilized. Acrylic :- Acrylic clarity, light weight, impact resistance, and weather resistance. Platform and Ladder :- CR sheet 1.6mm thickness, high strength and improved formability. Aluminium Clamp :- high fatigue strength, excellent castability, very good corrosion resistance,self-piercing riveting and clinching. PP Caps :- caps are manufactured from high quality polymers. GI Hardware and Chain :- All galvanizing hardware are carried out by the hot dip process, in accordance with specification IS 2629. Vinyle Sticker :- High Strength Acrylic Adhesive 300 is designed to be compatible with a variety of print methods and end use applications. MIG welding :- it is versatile and can be used with a variety of metals and alloys, corrosion resistance, soft surface to prevent injuries. Powder Coating :-The finish is more flexible than traditional paint, and allows for a small amountof bending and flexible as parts vibrate and move. Rubber belt :- Rubberized coating oover the steel core, height strength, flexible.

Design & execution of Artistic Relief work made out of FRP medium with following specifications. 1. Medium-FRP 2. 3D height-100 mm min. 3. Approx size-3.00mx3.00m The scope of the work includes conceptualization, Digital Design, Artist's remunirization, labour changes, painting and other finishing works if any. The Designer should have proven experience in fine Art, Architecture or any other radiant courses with required professional eperiences (at least five years for Diploma and 3 years for Graduate). The design to authority and after due approval the execution will be done. Payment will be made only on actual flat size of the relief excluding the boundary design if any.

Providing, fitting and fixing moulded FRP grating with chequered plate for covering drains all complete as directed by Engineer-in-charge.a) Mesh size - 38X38 MM, Thickness - 30 MM

Providing, fitting and fixing moulded FRP grating manhole with chequered plate for covering drain/ openings all complete as directed by Engineer-in-charge.a) Mesh size - 38X38 MM, Thickness - 30 MM

Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge

Providing and Displaying Topiary of Casuarina fresh & healthy having 5 to6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and stacking of Juniperus prostrata with 5 to 6 latral branches and green foliage in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Providing and Stacking of Lemon grass of ht. 30cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge.

Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Aspidistra, having 10 to 15 leaves well developed with fresh & healthy in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Chlorophytum-variegated, full of leafy suckers in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Setcreasea purpurea full of variegated leaves in 15 cm size of Earthen Pot/Plastic Pot as per direction of the officer-in-charge

Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge.

Providing and stacking of Daniella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..

Providing and stacking of Iresine herbstii, of height 20-25 cm. full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge

Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.

Beautifications existing pond with natural lotus/ water lilly without disturbing the aqueatic life exists in the water body. The contract is inclusive of maintain till full grown of the plants and flower

Supplying and planting colocasia plant having atleast four branches of minimum 450mm height.

Supplying and installation of free hold hanging dust bin made out of FRP di moulded min 4mm thick body thickness with necessary tilting arrangement design for easy cleaning from reputed brand like supreme, sintex or equivalent. The dust bin will be placed in pair of red and green colour but with provision of individual-tilting provision. the bidder should obtain prior approval of design of the dustbin before installation from the authority. The rate is inclusive of required civil works for fixing the same in position.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : 2.4.1 Screened through sieve of I.S. designation 20 mm

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately Holes 90 cm dia, and 90 cm deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately Holes 60 cm dia, and 60 cm deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately Holes 45 cm dia, and 45 cm deep.

Turfing with Sods (Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the engineer including preparation of ground, fetching of rods and watering)

Tube Well: Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost).

Machine boring of deep tube well upto 150 mm dia. Bore hole as directed by the Engineer in Charge

Motor Pump Set : Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 1 HP STAGE 5 to 18 with MCB controlled Submersible motor pump set control panel.

Supplying including installation, connection as approved by the Deptt., testing and commissioning of JET PUMP SET (HORIZONTAL) complete as directed and specified by the deptt. 1 HP single Phase jet pump set (Horizontal(Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia

150 mm nominal size dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (SUCTION PIPE) External work 40 mm nominal outer dia Pipes

Providing and placing in position filters of 40 mm diameter G.I./ PVC pipe with brass strainer of approved quality.

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Horizontal

Vertical

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

100 mm dia

150 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia

150 mm dia.

MODULAR TOILET : Foundation: Brick Foundation as per drawing with depth of 200 mm from ground level for anchor/column locations

Structure: The structure size will be 1820 mm X 1220 mm for Divyang Friendly Toilet PH unit . The Structure size for each Gents & Female Toilet/ urinal will be structure 1220mm x 910mm. The height (except foundation structure) – 2020 mm. (i.e. Plinth top to Top roof) of each unit.

Structure wall panels – i. Each wall consists of 4 sandwich panels (Inc of top louver panel in each side). ii. All 4-top wall panel to have single skin louvre panels (150 mm) of 0.6 mm Galvanized Plain powder coated sheet.

iii. Each wall panel is to be 40 mm thick Sandwich Panels made of 0.6 mm thick, Min 240 MPa Yield Strength (YS), Min 340 Ultimate Tensile Strength (UTS) zero spangled skin passed Tension levelled, Restriction of Hazardous substance (ROHS) compliant, 120 GSM galvanized plain, powder coated cold rolled sheet with insulation (38mm EPS (Expanded Polystyrene) of density 16 kg/m3) inside it. iv. The bottom most panel on 3 sides in each compartment to have SS 304 in the interiors upto 125 mm from floor that is to be riveted over powder coated galvanized plain sheet.

Structure Roofing – Flat roof of 40 mm thick Sandwich Panels made of 0.6 mm thick, 275 MPa Strength zero spangled skin passed 120 GSM galvanized plain powder coated cold rolled sheet with insulation (38mm EPS (Expanded Polystyrene) of density 16 kg/m3) inside it. The protrusion is to be 50 mm.

Structure corner pillars – 40 mm thick Sandwich Panels made of 0.6 mm thick, 275 MPa Strength zero spangled skin passed 120 GSM galvanized plain powder coated cold rolled sheet to be used for structure corner pillars

Doors –962 mm* 1790 mm * 40 mm thickness for Divyang Friendly Toilet PH unit (made of 0.6 mm Galvanized plain powder coated steel) inclusive of standard accessories i.e. 2 nos of A1 handle (6 inch), 1 L drop with Plastic bush, 1 No of A1 Tower bolt (6 Inch) and SS hinges and screws each and 1790 mm* 649mm * 40 mm thickness for Ladies Toilet/ Urinal & Gents toilet/ Urinal (made of 0.6 mm Galvanized plain powder coated steel) inclusive of standard accessories i.e. 2 nos of A1 handle (6 inch), 1 L drop with Plastic bush, 1 No of A1 Tower bolt (6 Inch) and SS hinges and screws in each toilet.

Ventilation - Powder coated steel ventilation above door (built in single panel) made of 0.6 mm thick, 275 MPa Strength Zero Spangled Galvanized plain sheet

External/Internal finish –Pure Polyester Glossy Powder Coating

Toilet Pan & Flooring –EWC with cistern for Divyang Friendly Toilet PH unit, Two EWC with citern and Two Ceramic Orissa Pan for Female toilet cum urinal and Gents urinal cum Toilet along with Anti-Skid Tile flooring

Electrical Fittings –1 LED Bulb & 1 Modular Switch in each compartment and required internal wiring.

Waste Management- Two Leech Pits with inspection Chamber.

Wash Basin- 5 nos of wash basin( One on each side of the block, One in the middle and one inside each of the Divyang Friendly Ph unit).

Water Storage Tank- 1 nos Storage Tank of 200 litres with a tank frame with each Toilet unit.

GAZIBOO: Supplying materials installation with proper finishing as per architectural drawingand comapny installation manual. Roof shringles(approved brand colour & texture) of 0.3m thick over 12mm thick water proof plyboard in two crossed layers as per roof and barge board design if any. On bamboo purlins/truss of roofing member tied with necessary screws,nails,bolts,anchor bolts where applicable. A water proofing membrane is to be applied on plyboard surface before placing the shringles. All the ridge/valley are to be covered with nea arrangement to give in integrated look of the structure including primer/paint in either sides of the roof and barge board.(will be measured and paid separately). Finished and complete as per specification/company manual and instruction of Engineer incharge.

FOOD COURT: Supplying materials installation with proper finishing as per architectural drawingand comapny installation manual. Roof shringles(approved brand colour & texture) of 0.3m thick over 12mm thick water proof plyboard in two crossed layers as per roof and barge board design if any. On bamboo purlins/truss of roofing member tied with necessary screws,nails,bolts,anchor bolts where applicable. A water proofing membrane is to be applied on plyboard surface before placing the shringles. All the ridge/valley are to be covered with nea arrangement to give in integrated look of the structure including primer/paint in either sides of the roof and barge board.(will be measured and paid separately). Finished and complete as per specification/company manual and instruction of Engineer incharge.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 1000 mm dia. R.C.C. pipe metre

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Point wiring for Primary points and from primary point to secondary points -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Circuit / submain /Light plug/ Common switch light point wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required. Wires : FR /FRLS - Finolex, RRKable, Anchor, Havels or equivalent as approved

2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire for pole light connections and common switch up - down light connections, cottage light connections for SMC box as directed.

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire From TPN DB to 15A common light switch.

Supply of 3C, 6 sq.mm armoured U/G aluminium cable from MDB to 3 nos, food counter DB as directed.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. Make : Anchor / Richa or equivalent as approved. (1 for security booth)

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

DISTRIBUTION BOARDS -

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.

Supply of U/G Cable -

Supply of following sizes of 1.1 KV grade single core/multicore aluminium conductor XLPE insulated and PVC sheathed armoured / unarmoured cable conforming to IS 1554 (Part-I) 1988.. Make ; RR Kable, Havells, Polycab, KEI Or equivalent as approved

4 Core, 35 sq.mm. XLPE armoured Aluminium Cable from ASEB Pole to MDB.

4 Core, 10 sq.mm. XLPE armoured Aluminium Cable from MDB to security room TPN DB and from MDB to Main Street/ Garden light Distribution Board.

3 Core, 6 sq.mm armoured U/G aluminium cable External lighting MDB to garden light feeder pillar.

Supply of 3C, 4sq.mm armoured U/G aluminium cable from to street / garden light common LILO connections as directed.

CABLE LAYING WORKS

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Up to 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3 X 4 sq. mm (19mm)

3 X 6 sq. mm (19mm)

4C X 10 sq. mm (19mm)

4C X 35 sq. mm (19mm)

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. : 32 mm dia

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. :40 mm dia

CEILING AND EXHAUST FANS - : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supply and Installation of 1200 sweep brown summer cool ceiling fan. Make ; Oirent summer cool or equivalent Havells or CGL make as approved. For food counter, Secyruty room and cofee house .

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supplying of 300 mm Exhaust fans suitable for 230 Volt, 50 Hz, Single phase, A.C. supply and complete with all standard accessories required. Make ; Orient 300mm Air flow or equivalent Havells or CGL as approve. For food court

PARK & CAR PARKING LIGHT FITTINGS - : Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Down light square shaped surface 12 watt LED,W (6.5K) light fitting for security room and food huts as directed. lighting Make - CGL Pearl Nios S 12W CDLor equivalent Surya, Siska, Havells, as approved

1 x 12 W LED T8 6500K retrofit batten tube light fitting with drive and frame Make ; Siska or equivalent CGL/ Havells/ Surya as approved for outside security room wall.

LED 40W moon light affect IP65 post top lantern with glare free optical designed PC difiser suitable for garden as required. . Make ; CGL Nebula or equvalent Philips, Havells as approved.

Supply of IP65, 60W LED CDL decorative street light for beautification application. Make ; Empire ( Ref. Cat.No. LPTC 40 CDL) of CGL / Vega of Surya or equivalent Siska, Havells, Philips as approved.

Supply of LED post top lamp set made of unbreakable poly carbonate suitable for mounting on pole fitting with drive and frame Make ;PRISM 40W (6K) Surya or CGL, Panasonic, Havells, phillips, Siska as approved.

Supply of IP 65, 10W LED CDL 3K bollard inverted prism type made up of extruded aluminium with PC defuser Make ; Libra ( Ref. Cat. No. LBLSN 10 CDL) of CGL or equivalent Havells, Surya, Philips, Siska as approved.

Supply and installation of WW IP 65 LED strip light for below the steps of sitting area and picture lighting as directed (each strip is of 5 meter length ) Make ; Siska - SSK-ST-5560-RGB-IP EX-D or equivalent CGL, Havels, Jaquare as approved.

Supply of 20W LED out door drive suitable for the above stated LED strip lights.

Supply and installation of 12W WW 3K LED surface mounted down lighting in die cast aluminium housing with high quality toughened glass diffuser. Make SSK 033074of Siska or equivalent CGL, Surya , Havells as approved.( For cottage inside lighting )

Supply and installation of 12W WW 3K LED surface mounted up down lighting in die cast aluminium housing with high quality toughened glass diffuser. Make SSK ;3037of Siska or equivalent CGL, Surya , Havells as approved.( For out side security booth )

Supply and installation of 20W NW LED surface mounted UP lighting in die cast aluminium housing with high quality toughened glass diffuser. Make SSK ;3074of Siska or equivalent CGL, Surya , Havells as approved.

Supply and installation of aerodynamically designed 70W CDL street lighting having inbuilt tilting angle arrangement with excellent thermal mamagement made from aluminium housing . Make CGL HAWN NEO or equivalent Philips, Havels, as approved. For car parking illumination lighting.

Supply and installation of 8 / 9 W 3K spike garden light in die cast aluminium housing with high quality toughened glass diffuser. Make SSK ;3771DZof Siska or equivalent CGL, Surya , Havells as approved.

Supply and installation of 12W WW 3K LED surface mounted bush lighting in die cast aluminium housing with high quality toughened glass diffuser. Make SSK ;3005of Siska or equivalent CGL, Surya , Havells as approved.

Supply and installation of 200 W NW 6500K LED surface mounted Flood Flat light made in die cast aluminium housing with high quality toughened glass diffuser. Make SSK -BLS-F-150W of Siska or equivalent CGL, Surya , Havells as approved.

Supply, Installation, testing and commissioning of 25W Integrated solar all in one street light having system efficacy 170 Lum/W, MPPT charge controller, LiFep04 battery, Mono crystalline solat panel, PIR motion sensor with company made 75mm dia steel pole as required with all necessary requirement for installations. (except foundation) Make ; CGL HELIUS I of CGL or equivalent Havels, Surya, Philips as approved.

Supply and installation of IP55 Poly carbonate SMC box size 230mmx170mmx105mm door fixed hinged (make - syntex) with 5A DP MCB with necessary clamp required to fit the box on the pole at required position or as directed .

Supply and istallation of 4.5 Kg, Mild steel ABC, A class powder/ CO2 type fire extinguisher

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing of G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for earthing conductor complete as required. (For horizontal run)

Providing and fixing of G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for earthing conductor complete as required. (For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

MAIN POWER DISTRIBUTION BOARD - MDB

Supply, installation, testing and commissioning of following OUT DOOR IP65- rain and dust proof floor mounting LT distribution Panel Boards of 2 mm thick sheet steel cubical design for out door FLOOR mounting factory fabricated suitable for operation on 440 V 3 phase, 50 Hz, A.C. supply with MCCBs/SFU/MCBs/ contactors, Extended rotary handles for MCCBs and other accessories, all in compartmentalised, cubical construction complete in all respects as per approved drawing and design including internal wiring, labels, ferrules, cable termination gland plates, earth terminals, painting etc. conforming to specifications.

63 A, 4P MCCB- 36 KA - 2 No.( having current capacity adjustable facilities ) 1 for ASEB supply and other for Generator supply having spreader link for connection to the incomming feeders.

100A, capacity 4P open type manual Change over switch - 1 - having inter locking arrangement with to incomming feeders. - eigher or basis

Provision for installation of DIGITAL ASEB 3phase meter and having suitable arrangement for connection of ASEB line

800 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve-1 Set

Outgoings:

40 A 3P MCCB, 25 KA - 2 Nos.

40 A 3P MCB, 25 KA - 3 No.. C - series

32 A DP MCB, 25 KA - 6 No.. B - series

Instruments:

P F meter

Frequency meter

LED indication lamp (R Y B ) with MCB pretection as necessary.

Earthing Bus

OUTDOOR EXTERNAL POWER Disbribution Board

Supply, installation, testing and commissioning of following External LT power distribution OUT DOOR IP65- rain and dust proof floor mounting Panel Boards of 2 mm thick CRCA MS sheet steel cubical design for out door floor mounting factory fabricated suitable for operation on 440 V, 3 phase, 50 Hz, A.C. supply with 24 Hrs. time switch/ MCBs/ contactors, and other accessories, all in compartmentalised, cubical construction complete in all respects as per approved drawing and design including internal wiring, inclusive of aluminium bus bar, common neutral link, earth bar, din bar for mounting MCBs for out gogoing , cable termination gland plates, painting etc. conforming to specifications as required. The panel shall have porvision of cable entry and out going at the bottom. The bus bar shall be sized with current density of Amperage 1A/sq.mm and MCB shall be connected using FR cables of proper rating.

24 Hours time ANALOGUE switch 1 no.

63A 3phase contacotor - 1 no.

40A TP, 36KA, Ics = 100% Icu MCCB with micropocessor base release with built in E/F Protection . Extended rotary handle and spreader terminal - 1 No. - for incoming feeder 1 no

320 A , 40mmx10mm TPN electrolllllytic Aluminium Bus bars with heat shrinkable color coded PVC sleeves shall be of E91E grade.

Ammeter - 0-50A, 3-phase 4 wire Accuracy Class - 1 as per IEC 62053-21.- 1 no.

Voltmeter - 0-500V 3 Phase,4- Wire Accuracy Class - 1 as per IEC- 62053-21 - 1 No.

RYB indication lamp. 1 set - with MCB protection.

Earth bar

Outgogoing -

25 A DP , 16KA, MCB for out gogoing 6 no

Out door Street / garden lighting feeder pillar

Supplying and fixing in PCC foundation of following OUT DOOR IP65- rain and dust proof feeder pillar for street light LT power distribution board ,for operatin in 230V,, made of 2mm CRCA MS sheet steel,dust & rain protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs for out gogoing conforming to specificationsetc as required. The panel shall have porvision of cable entry andout going at the bottom. The bus bar shall be sized with current density of Amperage 1A/sq.mm and MCB shall be connected using FR cables of proper rating.

40A DP Isolator for incoming feeder 1 no

36 A Bus bars

Neutrar bar

Earth bar

25 A, SP, 16KA MCB out gogoint 4 no

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.

Painting in double coat of above 3 M height GI pipe pole with black colour systhetic anamal paint as directed.

Supply of 8 mtr long galvanised octagonal pole with inbuilt JB arrangement HAVING DIN bar and Earth link bar (Top 70mm, Bottom 155mm, Thickness 3mm, Base plate 220x220x12 mm , 220 mm PCB. With single arm for installation of 6 no street light. Make Crompton, Jindal, Niozon as approved.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply of 6 mtrs height decorative pole with inbuild decorative SINGLE decorative arm matching with the lamps set as described under sl. No. 5.1 e .Please refer CGL decorative pole catalogue for CGL set or for Surya make set please refer corwn decorative pole or as approved for other company make decorative set.

Supply of 6 mtrs height decorative pole with inbuild decorative DOUBLE decorative arm matching with the lamps set as described under sl. No. 5.1 e .Please refer CGL decorative pole catalogue for CGL set or for Surya make set please refer corwn decorative pole or as approved for other company make decorative set.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre

Above 6.5 metre and upto 8.0 metre

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. (excluding reinforcement).

Supply, Installation, Testing and commissioning of out door 25KVA, DG Slient Diesel Generator . Make ; Cummins, Kirloskar .

BORE WELL PUMP

2HP, Single phase 6/ 26stage submerssible pump . Make ;

Supply of motor control panel suitable for 2HP single phase submerssible pump set Make ; C&S

Supply of 3core , submerssible copper cable make RR Kable or equv.

Supply of bore well 25Kg UPVC pipe Make : Supreme

Supply of 3core 6 sq, mm aluminium armoured under gorund cable for power supply for motor .

Cost of installation of pump se and pipes L/S

CCTV INSTALLATION : IP IR Dome Camera 6MP DS-2CD2163G0-IU 1/2.9" Progressive Scan CMOS ● 3072 × 2048@20fps ● H.265, H.265+, H.264, H.264+ ● Three streams ● 120dB WDR IR range: Up to 30 m ● IP66, IK10 ● Built-in micro SD/SDHC/SDXC card slot, up to 128 GB ● 3-Axis adjustment ● Built-in microphone 6 MP IR Fixed Dome Network Camera

DS-2CD2063G0-I 1/2.9" Progressive Scan CMOS BLC/3D DNR/ROI/HLC IP67 Built-in micro SD/SDHC/SDXC card slot, up to 128 GB 3072 × 2048@20 fps 2.8/4/6/8 mm fixed lens Color: 0.01 lux @(F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR H.265+, H.265, H.264+, H.264 2 Behavior analyses 120dB WDR 6 MP IR Fixed Bullet Network Camera

DS-2CD6362F-I(V)(S) 6MP Fisheye Network Camera 1/1.8” Progressive Scan CMOS  6 megapixel image sensor  Up to 3072 × 2408 resolution, real-time streaming  Multiple viewing modes  Line crossing and intrusion detection  Ceiling, wall or table mount modes  Up to 15m IR range  360° view angle  Built-in microphone & speaker  Audio/Alarm IO/ RS485(-S model)  IP66(-V model)  IK10 vandal proof(-V model)

50 Inch LED commercial display 127 CM DIAGONAL - LH50AN 3ND

6TB SATA HDD - ST6000VX001

16 Port PoE Switch : DE3E0518P-E

6U Wall mount rack with all accessories -- NWR-6U-5045-GR

CAT6 Cable - NCB-C6UGRVR-305 -NCB-C6UGRYR-305

RJ45 Connector - NPG-5E1TRA031-100

POLE WITH BASE PLATE AND PCC

CAMERA INSTALLATION CHARGE

Installation of all items with Laying cables including HDOP pipes etc. as required for laying cables, NVR RACK and other accessories

ANUPAM NIRMAN PVT. LTD.

ANIL DAS CONSTRUCTION PVT LTD