REPAIR /REPLACEMENT OF INTERNAL ELECTRIFICATION AND CONNECTED WORKS IN OTM AND MD ACCN OF ZONE-III UNDER AGE E/M-II OF GE (SOUTH), MEERUT CANTT

Amount

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site complete all as specified and directed.

All as per item No 1.00 here-in-before but except conduit complete all as specified and directed.

Material and labour for point wiring for One light point / Bell point controlled by one, one way switch 05 / 06 Amps with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed.

All as per item No 3.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No-3 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 3.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 3.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board complete all as specified and directed.

Material & labour for point wiring for One light point / bell point controlled by one, one way switch 05 / 06 Amps with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed.

All as per item No 8.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 8.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 8.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per serial item No 8.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fixing bell push flush type , 5 amps , 240 volts complete all as specified and directed.

Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and directed.

Supply and fixing steped type electronic fan regulator flush type AC, 230 volts, complete all as specified & directed

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Suppy & Fix in replacement of decorative wall light fixutre made up polycorbonate suitable for 10 watt retrofit LED lamp and including 10 watt LED lamp and including all accessories for fixing of fitting on wall complete all as specified and directed.

Supply and fixing decorative LED tube light fitting 1x20 watt surface mounting , intigrated with opal diffuser complete all as specified and directed.

Supply and fixing decorative LED tube light fitting 1x10 watt surface mounting , intigrated with opal diffuser complete all as specified and directed.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed .

Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4Sqmm for Phase and neutral + o1 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note: - One meter of conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length)

All as per item No 23.00 here-in-before but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 6 Sqmm for earth wire complete all as specified and directed. Note: - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length)

All as per item No 23.00 here-in-before but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as specified and directed. Note: - One meter of conduit along with 2x10.0 Sqmm wire and one 10.0 sqmm earth wire shall be measured as one length)

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed. .

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, including 100 Amp MCCB-01 No as incommer and 12 Nos MCB's for out going circuits inside of DB, including chases and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing in repair MCB, SPN ( Single Pole and Neutral), AC, 240 volts, B series capacity 20 Amps to 40 Amps 10kA and making connections complete all as specified & directed.

Supply and fix in repair MCCB for 4 pole 160A 18KA of capacity frame fixing in sheet metal enclosure on wall 415 volt 50Hz using trimble/ligs properly also including all nut and bot reqd fixing complete all as specified and directed.ected.

Supply and fix in repair MCCB for 4 pole 100A 18KA of capacity frame fixing in sheet metal enclosure on wall 415 volt 50Hz using trimble/ligs properly also including all nut and bot reqd fixing complete all as specified and directed.

S&F in repair Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed .

S&F in repair Isolator 4 pole 'B' series 63 amps capacity AC 415 V,10kA complete all as specified and directed .

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department complete all as specified and directed.

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

All as per item No 42.00 here-in-before but 16 Sqmm 4 core complete all as specified and directed.

All as per item No 42.00 here-in-before but 16 Sqmm 2 core complete all as specified and directed.

All as per item No 42.00 here-in-before but 10 Sqmm 2 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

S & F in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface complete all as specified and directed.

Supply and fix in repair decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material complete all as specified and directed.

Supply and fix in repair decorative LED tube light fitting / warm as directed 1x20 Watt surface mouting integrated with opal diffuser complete with all accessories and fixing material complete all as specified and directed.

Supply and fix in repair decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having both end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having one end connection, complete with all accessories and fixing material complete all as specified and directed.

Supply and fix in repair decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Suppy & Fix in replacement of decorative wall light fixutre made up polycorbonate suitable for 10 watt retrofit LED lamp and including 10 watt LED lamp and including all accessories for fixing of fitting on wall complete all as specified and directed.

Supply and fix in repair LED lamp 9 watt complete all as specified and directed.

Supply and fix in repair 15 watt emergency bulb rechargeable with 4 hours backup cool day light complete all as specified and directed

Supply and fix in repair switch piano 05/06 Amp single core one way 240 volt complete all as specified and directed

All as per item No 62.00 here-in-before but socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

All as per item No 62.00 here-in-before but switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

All as per item No 62.00 here-in-before but socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

All as per item No 62.00 here-in-before but switch bell push flush type , 5 amps , 240 volts complete all as specified and directed.

All as per item No 62.00 here-in-before but door bell ding dong type , 240 volts complete all as specified and directed.

All as per item No 62.00 here-in-before but steped / Switch type electronic fan regulator flush type AC, 230 volts as per site requirement complete all as specified and directed.

All as per item No 62.00 here-in-before but lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fix in repair fan capacitor 2.5 MFD single phase 230 volt complete all as specified and directed.

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed.

All as per item No 71.00 here-in-before but capacity 25 watt complete all as specified and directed.

Supply and fixing in repair LED light 12 watt square type of size 150x 150mm surface/ ceiling mounted with aluminium hausing and frosted cover complete all as specified and direcred .

Supply and fix in repair LED buld head light fittng mouting with in built edge lit LED lamp 100 watt complete all as specified and directed.

Supply and fix in repair LED driver suitbale 36/42 watt LED panel light fittng 2x2 luminaire completed all as specified and directed.

Supply and fixing in repair surface mounting LED 2X2 luminaire 36 W CRCA powder coating housing with anti-glare diffuser with warm white LED,s including driver & including all acessories complete all as specified and directed.

Supply and fixing in repair recess mounting LED 2X2 luminaire 36 W CRCA powder coating housing with anti-glare diffuser with super bright / Boom white LED,s as per site requirement with & including driver & including all acessories complete all as specified and directed.

Supply and fixing in repairs 35 watts LED post top light fitting spun aluminium body finished with stove enameled & transparent acrylic cover , symmetrical light distribution with high power LEDs as light source IP 65 protection complete all as specified and directed.

Supply and fixing LED Flood light 100 watt 230V AC outdoor type with thermal management in multiple optics and epuipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fix in repair 3mm laminated sheet suitable for 5 Amp independent board and cut in suitable size to fix 5 Amp switch and socket complete all as specifed and directed.

Supply and fix in repair 3mm laminated sheet suitable for 15 Amp independent board and cut in suitable size to fix 15 Amp switch and socket complete all as specifed and directed.

Supply and fix in repair 3mm laminated sheet suitable for switch board and cut for suitable Nos of switches and sockets and fan regulator as per site requirement complete al as specifed and directed.

Supply and fix in repair pressed steel terminal box 60mm deep with 3mm thick laminated sheet on top size 75mmx75mm for mounting switch socket regulator including taking out old box and making good disturbed surfaces as per existing complete all as specified and directed.

All as per item No 83.00 here-in-before but 100mmx100mm size complete all as specified and directed.

vibha associates

SIYA ASSOCIATES

VIRAT CONSTRUCTIONS

NITHYA INFRATECH

Shikha Enterprises

yameen enterprises

PARADISE INFRA POWER COMPANY