GE/C-51/2023-24 INTERNAL GI/ CI FITTING FLOORING, TILING, JOINARY WORK INCLUDING REPAIR/ REPLACEMENT OF SEWAGE LINE, CLEANING OF MANHOLE AND SEPTIC TANK AT 105 TA, 202 CEDU, 1883 CER BTY, CIU, GE OFFICE, CHURCH ROAD, ARTRUC , CC HUT GYM ROAD, TRANSI

Amount

M&L for old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.

M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty up to 10 m height complete all as specified and directed.

M & L for preparation of Old surface (Plastered or un plastered) on ceiling by completely scraping/ removing the existing treatment and applying two coats of white wash over a coat of primer complete.

M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame).

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame).

Taking down shutters of any description not exc 2 Sqm each.

S & F Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified.

S & F mild steel framed work such as grillsn gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders freamed balusters, walk ways, railings, framework of watertanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc & making good complete all as specified & directed by Engr-in-Charge.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet single rebates of size 105x60mm for doors, ventilator including necessary fixing lugs, hinges, lock strike plate etc & making good complete all as specified & directed by Engr-in-Charge.

S&F 35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b).

M & L for 30 mm thick 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete half fixed glazed and half top hung gaused complete all as specified and directed (Glass shall be measured and paid separately).

M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , and including dismantling complete all as specified and as directed by Engineer-in-Charge.

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed.

M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including alu handle 150 mm ,tower bolt 150 mm ,floor spring heavy duty "SAMRAT" locking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. provision for fixing the exhaust fancomplete all as specified and as directed.

Servicing and greasing of aluminium door including replacement nut , screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/components by new parts /components for smooth functioning of door and refixing the same in existing opening/position, complete, all as specified and directed.

Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size 50x50mm window grill as per approved sample and as per IS specifications complete all as specified and as directed.

Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely). Note: (i) For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made. (ii) Material test certificate and authentication should be provided by the manufacturing company.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separtely)

S&F in repair Floor door stopper of aluminium alloy body and tongue, overall length of cover plate anodized, with hard drawn steel spring, fixed to shutters, complete all as specified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter as in repairs complete all as specified and directed.

S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete, all as specified and directed.

S&F SS butt hinges medium weight 100 mm size fixed with MS screws.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

Supply and fix figured glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified.

S & F 19/20mm thick exterior grade Prelaminated particle board as in cup board shutter,incl 6mm thk teak wood leaping and necessary rebating for double shutter where reqd incl polishing to leaping complete all as specified.

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm).

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads.

S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws.

S & F for steel drapery Rod 18mm dia with brackets in cupboard complete all as approved by Engineer-in-charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.

S & F for sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waist including bedding in cement mortar to dwarfwall or including fixing cantilever, brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specifed as direted.

S & F in repair for 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repair for Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

S & F in repair for Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

S & F in repair for Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

S & F in repair for bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F in repair 15mm dia Pillar taps, brass CP, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F for 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

S&F for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles (600 x600) 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

S&F Non - skid Ceramic colour tiles (600 x100) 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for glazed ceremic colour tiles (600x300) 7mm thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut polished Machine cut kota stone 20-25mm thick as in floor, steps, pillar fixed with neat cement slurry over backing coat of 20mm thick in CM (1:6) including rubbing and polishing complete all as specified.

S/F in replacement PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete.

S/F in replacement PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete.

S & F in replacement 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S & F in replacement 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed.

S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete.

S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete.

S&F for 100 mm bore cast iron bends & tee complete all as specified and as directed.

S&F for 75 mm bore cast iron bends & tee complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S & F for Aluminium drapery curtain Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-charge.

S & F in repairs 15 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

S & F in repairs 20 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

M and L for rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and nipple fixed in position, with 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

Maintenance/ cleanliness of complete sewage drainage system by attending day to day complaints by deploying four (4) SEWER MEN (UNSKILLED) from 9 AM to 5 PM excluding sundays/ holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints, the system fully functional wrt sewage drainage system of any depths, opening/cleaning of chocked sewer pipes, drains, manholes, gully traps, WC's, WHB's, sinks, floor/Gully trap etc to all floor and vertical stacks of all sizes to keep sewerage and drainage system fully functional including disposal of silt, sludge malbah, debris, waste material and replacement of damaged Gully traps, oval asses door cover, manhole cover/Gully trap cover etc to the entire satisfaction complete all as spd and directed by GE/Engineer-in-Charge.

Taking down Cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc omplete all as specified and as directed. Engr-in-Charge .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for omplete all as specified and as directed. Engr-in-Charge .

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc omplete all as specified and as directed.Engr-in-Charge .

M&L for cement concrete 1:3:6 type C-I, using 20 mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L for brick work with sub class 'B' brick using old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 omplete all as specified and as directed.

All As per item no 83 here in before but except bricks

Excavation any type of soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in in hard dense soil omplete all as specified and as directed.

All as per item No 82 here-in-before but exc 1.50m and n exc 3.00m in depth.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil omplete all as specified and as directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation of manholes omplete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregates as in surfaces channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stoped ends etc omplete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW pipes after they are laid and tested including demolition of old bed and pipes omplete all as specified and as directed. (thickness of concrete bed 100mm).

All as per ser item No 89 here-in-before but for 200mm internal dia Salt glazed stoneware pipes (thickness of concrete bed 150mm).

Supply and laying, jointing 150mm internal dia of salt glazed stoneware pipes grade 'A' incl testing and laid in trenches to a level on concrete bed complete all as specified.

All as per item No.91 here-in-before but 200mm internal dia of salt glazed stoneware pipes grade 'A' .

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note - Water proofing compound shll be measure and paid separatelly.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. .

Supply only intergral water proofing compound complete all as specified and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150/200mm dia pipes omplete all as specified and as directed.

S & F in replacement for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mmx80mm omplete all as specified and as directed.

S & F in replacement for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx450mmx50mm factory made all as specified and directed by Engineer-in-Charge.

S & F in replacement for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 900mmx900mmx80mm omplete all as specified and as directed.

Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical etc and disposal off the same out side the defence area in a close area notified by Municipal Corporation of Delhi all as directed by Engr-in-Charge.

Mechanically used water fitting Hydraulic pressure machine and water sucking hydraulic pressure machine jet press for cleaning of sewage line shall be used by the contractor as per direction of Engineer-in-Charge as on required basis for the whole day i.e 8.00 Hrs and shall be completed to the entire satisfaction of GE. (For Dhaula Kuan Part -I ) all as specified and as directed. Note :- Rate quated and deemed to be for the whole day.

All as per item No. 101 above but in the area of RR Colony.

All as per item No. 101 above but in the area of MES Civilian Accn.

Taking down CI/PVC/AC soil pipe from wall, treches of any description including fittings.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation and PCC bedding and haunching in below ground level or in floors or fixed to walls with clamps etc, bore of pipe 75mm complete all as specified and directed.

Demolition of existing sewage line pipe of 150 mm in internal dia complete incl removal of rubbish out side from MOD land complete all as specified and directed.

All as per Sel item No 106 here in before but 200mm internal dia.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation and PCC bedding and haunching in below ground level or in floors or fixed to walls with clamps etc, bore of pipe 100mm complete all as specified and directed.

M&L for Cement Concrete 1:3:6 type C-2 Using 40mm graded aggregates for bedding layers of laid Complete all as specified (thickness of concrete bed 100mm).

S & F DWCPE (SN8) 180 (OD) /163 (ID) mm dia pipes Snap fit/Push fit Coupler with rubber ring/gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed Complete all as specified.

S & F DWCPE (SN8) 200 (OD) /175 (ID) mm dia pipes Snap fit/Push fit Coupler with rubber ring/gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed Complete all as specified.

Cutting through brick wall in cement mortar for holes and making good disturbed portion in CM (1:3) or cement concrete (1:2:4) type B-1 as required.

S & F in repair 110mm dia PVC SWR junction single T equal or unequal with acess door.

S & F in repair 110mm dia PVC SWR branch piece double (double Y) equal or unequal with acess door.

S & F in repair 110mm PVC (SWR) vent cowl.

S & F in repair grating doom 125mm dia with waste hole of CP complete all as specified.

S&F in repair 32mm dia PVC waste flush pipe for urinal/kitchen sink/WHB including CP waste coupling 32mm dia including taking down old existing pipe complete all as specified and as directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete all as specified.

M&L for 20mm thick screed bed in CM ( 1:6) Complete all specified and directed.

M&L for Coloured Cement concrete Chequered tiles 25cm x 25cm x 20mm thick, machine pressed;with grey cement and no pigment set jointed and pointed in neat cement slurry in floors, and cut and polished Complete all specified and directed.

M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 60mm thickness, M-35 Gde,Over and including 25mm thick layer of sand complete all as specified and directed.

S& F in repair vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet complete all as specified and directed by Engr-in-Charge.

S& F in repair 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complerte all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

Supply& Fix in repair vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified.

M&L for 75mm thick Cement concrete type B- 1, 1:2:4 (40mm graded aggregate) even and smooth laid in alternate bays complete all form fork etc complete.

Supply only MS Butt hinges medium wt cold rolled.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone agg) for filling chowkhat

Schedule of Credit

M/S Sunil Steel Works

a.k constructions

imran construction company

SHREE RAM BUILD TECH

VIJAY KUMAR GUPTA

Keshav Brothers