WELCOME MAINTENANCE IN CERTAIN BLDGS, MAINTENANCE OF SMALL ARM FIRING RANGE AND REPAIR TO JOINERY, PLUMBING, SANITARY FITTINGS, FLOORING AND OTHER REPAIRS AT MD and OTM ACCN AT SITE P AFS UNDER GE AF THANE

Amount

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying one coat of white wash on walls ,complete all as specified and as directed by Engr-in-charge.

M & L for preparaing plastered or unplastered surfaces of old Ceiling including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of white wash on ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of Oil bound distemper on walls ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of Oil bound distemper on ceiling ,complete all as specified and as directed by Engineer-in-charge.

M&L for applying 3mm thick one coat of wall care putty on wall ,complete all as specified and as directed by Engineer-in-charge.

M&L for applying 3mm thick one coat of wall care putty on ceiling ,complete all as specified and as directed by Engineer-in-charge.

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of Oil bound distemper on walls ,complete all as specified and as directed by Engineer-in-charge.

M & L for preparation of old surfaces of wood and wood based of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamal paint ,complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old surfaces of steel and iron of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamal paint ,complete all as specified and as directed by Engr-in-charge.

M&L for writing letters or figures (in block, roman, italic or indian etc ) n exc 30 cm high ,complete all as specified and as directed by Engr-in-charge.

S&F in repair CP health faucet with 8mm Dia,1 Meter Long Flexible Tube & Wall Hook complete all as specified and as directed by Engineer-in-charge.

S&F in repair Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-charge

S&F in repair ordinary rat tail pattern springs 300mm size with roller and roller plates of mild steel incl welding to angel iron plate or fixing with wooden/steel chowkhats as required and as specified including necessary welding where ever required complete all as specified and as directed by Engineer-in-charge. Make : Heera, Universal.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with putty or fixed with beads ,complete all as specified and as directed by Engineer-in-charge.

S&F in repair 3mm thick sheet glass ordinary quality and glazing in any type of frame with oil putty (or bedding) in square exc 0.5 sq. m in each pane ,complete all as specified and as directed by Engineer-in-charge

Ditto as per Srl item no 15.00 above but figured glass ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs stainless steel wire mesh of 0.56mm dia of wire and average width of aperture 1.18 mm & fixed with tinted tacks of galvanised over staples for steel window and ventilator or aluminum window as complete all as specified and as directed by Engineer-in-charge

S&F in repair 300mm long aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified as directed by Engineer-in-charge.

S&F in repair Floor door stopper of 140 mm long body of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and as directed by Engineer-in-charge.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry over and included 10mm thick bedding layer/ backing coat in CM 1:6 and pointed in white or colour cement to match complete all as specified as directed by Engineer-in-charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:6 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by Engineer-in-charge

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe) ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, CP waste fitting and PVC waste pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including, seat and cover, connection to trap,complete all as specified and as directed by Engr-in-charge.

S&F in repair stop valves for 15 mm bore dia fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and as directed by Engineer-in-charge.

S&F in repair Bib tap for 15 mm bore dia, fancy type chromiun plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F in repair brass CP brass shower rose with swivel joint 125 mm size all as specified in repairs, complete all as specified as directed by engineer-in-charge

S&F in repair aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges ,complete all as specified as directed by engineer-in-charge

S&F in repair soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-in-charge

S&F in repair sinks with drainage board made of stainless steel of mimimum 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge.

S&F,in repair, stainless steel plate rack of size 31"x30"x10" of SS grade 304 and 0.63mm thickness fixed with raw plugs and screw complete all as specified and as directed by Engineer-in-charge (Make : Blue star, Silver shine , Prayag)

S&F grating of PTMT of dia 125mm with or without waste hole complete all as specified and as directed by Engineer-in-charge

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and as directed by Engineer-in-charge.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and as directed by Engineer-in-charge.

Refixing of old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) ,complete all as specified and as directed by Engineer-in-charge.

Refixing of old 20mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) ,complete all as specified and as directed by Engineer-in-charge.

M&L for galvanised iron tube 15mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors complete all as specified and as directed by Engineer-in-charge

Supply and fix 16mm outer dia 3-layers PP-R polypropelene random copolymer concealed pipes SDR7.4(PN 16) UV stabilised and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaed polypropylene random fitting fixed complete to walls ,ceilings or in floor etc. ,complete all as specified and as directed by Engineer-in-charge.

M&L for galvanised iron tube 20mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15 mm Pillar taps, cast copper alloy, with capstan heads,fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge.

Dismantling water tanks (exc 500 liter but n exc 1000 liter capacity) and removing to store ,complete all as specified and as directed by Engineer-in-charge.

M&L for Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 1000 liters capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and as directed by Engineer-in-charge.

S&F 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed ,complete all as specified and as directed by Engineer-in-charge.

S&F gun metal globe or gate valve for bore dia of pipe is 20mm ,complete all as specified and as directed by Engineer-in-charge.

S&F in repair for gun metal globe or gate valve bore dia of pipe in 20mm complete all as specified and directed.

S&F in repair for PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge.

S&F in repair for PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge.

S&F in repair for PVC (SWR) bends 110mm any radius with rubber ring complete all as specified and as directed by Engineer-in-charge.

S&F in repair for PVC (SWR) branch piece 110 mm, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-charge.

S&F in repair for PVC (SWR) branch piece 75 mm, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repair stop cock of 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as diected.

Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed.

M&L for filling HDPE sand bags khaki of size 30cmx30cmx80cm with sand and closing the open end with nylon wire complete all as specified and directed by Engr-in -charge.sand bag Cat NoB/N/IV manufactured by- DCPL or Equivalent. ( Note: 1.Old Serviceable Sand retrived from relevent item of Sch A shall be used against this item for filling of HDPE bags)

Supply only screnned seive fine sand in any shape/position as approved by engineer in charge

Supply only saw dust in any shape / position as approved by engineer in charge

Labour for mixing in proportion for items mentioned above (i.e Srl Item No 59.00 & 60.00) as decided by Engr-in- charge including sieving,laying,stacking ,depositing and lifting the mixture up to 6.00m and laying in slope,complete all as specified and as directed by Engr-in-charge.

Labour for extraction of old existing mixture available at site including sieving, lifting, laying, stacking and depositing the mixture as directed by Engineer-in-charge.

M&L for raised pointing in cement mortar 1:4 to random or polygonal rubble uncoursed or brought upto courses ,complete all as specified and as directed by Engineer-in-charge.

Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge.

Taking down door Chowkat Exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge.

Taking down Shutters of any description n exc 1 sqm each complete all as specified and as directed by Engineer-in-charge.

Taking down Shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-charge.

Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down complete all as specified and as directed by Engineer-in-charge.

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm complete all as specified and as directed by Engineer-in-charge.

Taking down damaged or broken aluminum anodized/powder coated windows/doors frames or Panels with necessary accessories / fitting including of aluminium section, rectification of roller, wiremesh, window panes and refixing duely repaired with new material , complete all as specified and directed by Engr-in-charge. (Note : All Materials (i.e members/hardwares and other relevent connected accessories) used in rectification shall be paid separately under relevent items of Sch A) as supply only

Supply only aluminium anodised/powder coated frame for doors/windows, ventilators and aluminium section for windows as directed.

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers complete all as specified and as directed by Engineer-in-charge.

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge.

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane ,complete all as specified and as directed by Engineer-in-charge.

Supply only aluminium anodised/powder coated star lock for doors/windows, complete all as specified and as directed by Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing in SSR PART-I ,complete all as specified and as directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing ,complete all as specified and as directed by Engineer-in-charge.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and as directed by Engineer-in-charge.

S&F 35mm thick IInd class Hard wood rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated ,complete all as specified and as directed by Engineer-in-charge .

S&F in repair for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or rounded miltred and rebated sash bars any number to received glass gauze etc for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engineer-in-charge .

M&L for medium density fibre board 18/19mm , exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and as directed by Engineer-in-charge .

M&L for medium density fibre board 12mm exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and as directed by Engineer-in-charge .

S&F 40mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed .

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-Charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required , complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long , complete all as specified and directed by Engr-in-Charge

S&F extruded aluminium alloy handles 150mm fabricated type, anodised ,complete all as specified and directed by Engr-in-Charge

S&F Aluminium alloy, anodised, sliding door bolt with hasp, 300mm long staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium Alloy and fixeD complete all as sfpd and directed Make-classic/Shalimar etc equivalent ISI Marked.

S&F aluminium anodized barrel tower bolt 150mm long extruded section and fixed , complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloy handles 100mm long fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F but hinges stainless steel 100mm long ,complete all as specified and directed by Engr-in-Charge.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified and as directed by Engr-in-charge.

S&F sheet glass ordinary quality 6.3 mm thick and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge.

S&F figured glass, pin-head type 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge.

S&F in repair magnetic catches MS body and striking plate with aproved quality complete all as specified and as directed by Engineer-in-charge.

S&F in repair continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm complete all as specified and as directed by Engineer-in-charge.

S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board all as per directed and specified by engr-in-charge.

Extra over rates of block board or veneered particle board 12mm thick for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed by Engineer-in-charge.

S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame work ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs aluminium door closer hydraulically reguleted, designation No. 3 univarsal type aluminium extruded body suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kgcompete all as specified as directed by Engineer -in -charge

S&F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, with stainless stell cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area compete all as specified as directed by Engineer -in -charge

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in dry mortar complete all as specified as directed by Engineer-in-charge.

M&L machine cut cudappa stone slab 20-25 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including 10mm thick rendering in CM1:3 complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of New Steel surfaces of any description over 10cm width of girth applying Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer etc complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm two way Stainless steel bib cock for health faucet complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC cabinet mirrors of size 550x400x75mm including necessary shelves made of PVC sheets of minimum 5mm thick and mirror fixed on the front side of the shutter complete all as specified as directed by Engineer-in-charge (Make- Nilkamal,Prayag,Supreme)

S&F in repair Bib taps, fancy type chromiun plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified as directed by Engineer-in-charge

S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified as directed by Engineer-in-charge

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge.

S&F Grating doom 100mm dia of PTMT (Min weight 25gms) ,complete all as specified and as directed by Engr-in-charge.

M&L cement concrete 40mm thick type B-1 1:2:4 using 20mm graded stone aggregate) as in sub base of floors etc ,complete all as specified and as directed by Engr-in-charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4CM screed bed or bedding layer for laying floor finishes ,complete all as specified and as directed by Engr-in-charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4 CM screed bed or bedding layer for laying floor finishes ,complete all as specified and as directed by Engr-in-charge.

M&L Granite 20mm thick (of any type) work (table rubbed and polished in steps,jamps,pillars cooking plat form and like in CM 1:4 including pointing in white cement(1:2) etc ,complete all as specified and as directed by Engr-in-charge.

M&L machine cut Kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs incl rubbing and polishing incl 15mm thick screed bed in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.

Dismantling water tanks (exc 250 liter but n exc 500 liter capacity) and removing to store ,complete all as specified and as directed by Engr-in-charge.

M&L for Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 500 liters capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and as directed by Engr-in-charge.

M&L for cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with rotary sets with approved detergents and sucking all dirty water by vacuum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, complete all as specified and as directed by Engineer-in-Charge. (a) Overhead PVC water tank n. exc 500ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk

Cleaning and removing all scale and dirt etc, from tanks capacity exc 500 ltr & n. exc 1000 ltr and from months of circulating pipes etc

Cleaning and removing all scale and dirt etc, from tanks capacity exc 1000 ltr & n. exc 2000 ltr and from months of circulating pipes etc

S&F in repair Brass CP mixer for mixing hot& cold water screwed down for iron pipe and fixed to 15mm dia bore pipe etc complete all as specified

Dismantelling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-In-Charge.

M&L for 15mm thick mineral board fine fissured in true horizontal level of size 600x600 mm as in false ceiling hot dipped galvanised steel section exposed surfeces with precoated capping main centre to centre size 24mm x 32mm having 0.27mm gauge at every 1200mm centre to centre and wall angle of size 19mm x 19mm having 0.35mm gauged fixed to periphery at every 1200mm c/c on both directions using 3mm thick prestrightened at every 1200mm c/c on both directions using 3mm thick prestrighteed GI wire, laying etc complete all as directed by Engr-in-charge.

MSK Everlast Enterprises

M/S VISHRANTA CONSTRUCTION

Biju Construction & Co

askonstruct and supplier

Nissan Electricals