REPAIR TO SUNKEN LEAKAGE SEEPAGE VEGETATION GROWTH INTERNAL PLASTER CI PIPE LINE CRUMPLE SHEET AND OTHER CONNECTED WORK AND CLEANING AND REPAIR TO SEWAGE LINE MH CHAMBERS STORM WATER DRAINS REPAIR REPLACEMENT OF DRAINS FOOT PATH RCC MS COVERS

Amount

Systematicaly cleaning and desilting of pipe sewers of any dia including man holes and gully trap of any size and depth by passing knots , bambboo, kamti and disc of required size , pumping out liquid waste / sewage , plugging diverting the flow in the drain , if necessary and stacking the removed silt / sludge in deposits as directed including taking precautionary measures such as safty belts , dry cells , torch for lighting in side the manholes and drain etc, sprinkling bleaching powder on the silt / sludge removed to avoid bad smell and disposal of silt out side MD land complete all as specified and directed.

Cleaning existing storm water drainage / culverts up to any depth including removing cover slabs/grills , soils , spoils , vegetation , silt etc and refixing cover slabs/grills and removing material outside the MD land exc. 10 Km complete all as directed and specified.

Cleaning the blockage in Floor trap, Nahani trap, Gully trap, WC "P" trap or "S" trap and refixing the same after cleaning the pipes making good damaged cement joints , dia of pipe n. exc 150 mm all as specified and directed. Note : Work shall be carried out upto G+14 storey bldg

M&L for cleaning eye ( oval access door) for bends , branches ,sections etc of dia n. exc.100mm at any floor level. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Cleaning the blocked manholes upto 4.5m depth by mannually/jetting & sunction machine all as specified and directed

S&F in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc complete all as specified and directed .

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair Stop valves, cast copper alloy high pressure 15mm bore ISI marked with cruch or butterfly handles screwed down both side for iron pipes complete as specified and directed

S&F in repair 10litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs

S&F in repair 32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal complete all as specified and directed

S&F in repair vitreous china bowl urinal Urinal Flat Back size 420 x 395 x 635 mm with CP urinal Spreader and waste pipe complete all as specified and directed

S&F in repair vitreous china urinal partition of size 90 x 320 x 720 mm complete all as specified and directed

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density for low level cistern.

Taking down & S&F GI Tubing medium grade 15mmm bore with all fittings, laid in trenches, wall or roof complete all specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

S&F 100 mm extruded aluminium handles, fabricated type anodised

S&F 100mm aluminium anodised barrel tower bolts of extruded section

S&F 75mm stailess steel medium weight butt hinges all as specified and directed.

Demolition of concrete of any description and in any position all as specified

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 10 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of liquid membrane over a coat of primer of STP make as per manufacturers instruction over vertival sides of sunken floors.

M&L cement concrete 1:7:12 F2 type with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.

S& F in repair vitreous china wash down water closet pedastal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistren and flush pipe) with 'P' or 'S' trap complete all as specified.

M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

S & F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls.

S & F PVC (SWR) bends 160mm bore any radius

S & F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S & F PVC (SWR) bends 110mm bore any radius

S & F grating doom 100mm dia of PTMT (Minimum weight 25gms)

M & L jointing only 100mm bore cast iron pipes and fittings, in repairs, with cement joints.

M & L jointing only 75mm bore cast iron pipes and fittings, in repairs, with cement joints.

M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4). Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Excavation in trenches in hard / dense soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n. exc 1.5 m in depth and getting out all as specified.

All as per item No 43.00 but exc.1.50m and n.exc. 3.00m depth.

All as per item No 43.00 but exc.3.00m and n.exc. 4.50m depth.

Demolition and breaking up drain pipes 150 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .

Demolition and breaking up drain pipes 200 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .

Demolition and breaking up drain pipes 300 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .

M & L for RCC drain pipes, 150 mm dia confirming to class NP2, laid in trenches and jointed with collars as specified.

M & L for RCC drain pipes, 200 mm dia confirming to class NP2, laid in trenches and jointed with collars as specified.

M & L for RCC drain pipes, 300 mm dia confirming to class NP2, laid in trenches and jointed with collars as specified.

M&L for Soil-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed.

S&F for bends and taper bends, any radius for Soil-glazed stoneware pipes for 150 mm dia pipes complete all as specified and directed.

M & L Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia SGSW pipe complete all as secified and directed

All as per item No 54 above but for 200 mm dia pipes

All as per item No 54 above but for 300 mm dia pipes

Returning , filling in, includding spreading , leveling , watering and well ramming in layers n. exc. 25cm in hard / dense soil all as specified.

Removing excavated soil side and demolised material exc 5 Km but n. exc 10 Km all as specified .

Demolition of brick or stone / boulder work built in cement mortar including all quoins, arches, pillars etc .

M&L brick work with subclass B brick straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 all as specified .

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M & L 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrete wall surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.

M&L rendering 15mm thick in CM (1:3) on wall surfaces with water proofing compound , finishing surface even and smooth without using extra cement. Note: - Supply only water proofing compound will be measured & paid separately

M & L preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by E-in-C

Supply only water proofing compound of ISI make

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for MS Plates chequered (Gde E-250, quality-A) for manhole cover fixed with brackets/handle etc completed all as specified and directed.

S&F framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work confirm to Fe 290 Gde-E-165

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and as directed.

M&L for Cement concrete type B-1 1:2:4 ( 20 mm graded stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses paarapets and railings upto 60 cm in height, coping etc concrete complete all as specified and directd.

M&L for Cement concrete type C-2 1:3:6 ( 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directd.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M & L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade.

M & L 25 mm thick Sand filling under floors or in foundations including watering and consolidation

M & L Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey ecment and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as coping,road side interlocking ,stops including necessary formwork complete all as specified and directed.

Removal of debries outside of MD land exc. 5 Km but n.exc. 10km.

M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M/L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .

Material and labour, forming construction joints of width 10mm & depth 25mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Material and labour, forming contraction joints (dummy joints) of width 10mm & depth 35mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Demolition of cement concrete (unrinforced) of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc.

Treatment of sunken floor slab compraises of the following specifications and all as specified :-

(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate mixed with integral water proofing compound @ 3% by wt of cement consumed.as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost of cutting holes and pipes shall be measured and paid separately)

(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)

(iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.

(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

(v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.

(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)

(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (Black Japan pipes shall be paid separetely).

Cutting holes in bricks or RCC walls exce half brick built in cement mortar including making goor after inserting and setting spouts all as specified.

M & L GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and direced by EIC.

M&L for filling with PCC 1:5:10 type E2 (1 Cement : 5 coarse sand : 10 graded aggregate 40 mm nominal size) as specified.

M&L non-skid coloured Ceramic tiles 400x400x6 to 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia (Minimum weight 25 gms)

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

All as per item 93 above but except pipe.

S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

All as per item 95 above but except pipe.

S & F CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) all as specified and directed.

S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) all as specified and directed.

S & F CI Tee 100mm bore with cement joints complete all as specified.

S & F CI Tee 75mm bore with cement joints complete all as specified.

S & F 100mm cast iron sanitary connection socket to fit WC out-let.

Taking up or down GI tubing and connections 15 mm bore including cleaning for refixing or removal to store complete all as specified.

Refixing old GI tubing and connection15 mm bore in new or old position in ( Walls, ceiling, floors etc) with old accesories complete all as specified.

S&F GI Tubing 15 mm bore medium grade with all fitting and fixed comlete to wall and ceiling or laid in floors complete all as specified.

M & L Complete removal of existing treatment from wall surfaces by scrapping, washing & applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) over one coat of primer inluding necessary scaffolding, Safety net etc all complete as direted by Engr-in-Charge. Note :- 1. Work to be carried out upto G+14th floor. 2. Second coat to be applied after inspection of 1st coat by Engr in Charge.

Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water in patches n.exc. 4 Sqm each.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of bricks work or concrete wall surfaces finished even and smooth without using extra cement.

M&L for 05 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth all specified & as directed.

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement and using welded mesh where required all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC to be mixed in setting coat only and WPC and welded mesh shall be measured and paid separately)

Supply only Welded steel wire fabric not exc 4 kg per sqm for plastering in concrete surfaces

M&L preparing newly plastered surfaces of walls and applying two coats of Acrylic based exterior paint exterior grade (100% Acrylic) over a coat of primer & bio wash on wall.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified.

All as per item 114 above but on ceiling.

S & F Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wasters, including bedding in cement mortar to dwarf walll or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460 mm bowl sie 410mm x 330 mm x 160mm complete all as specifice and directed.

S&F in repair 1mm thik plate rack made of stainless steel, 600 x 750X250mm(Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction.

S&F in repair 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed cmplete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position compete all as specified and directed.

S & F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union fixed in repair complete all as specified and directed.

Chromium plated shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of chromium plated including fixing to steel pipe or union fixed in repair complete all as specified and directed.

Dismantling mild steel work as in angles, tubular ,brackets of vally gutter of any description and in any position.

S&F including fabrication framed work in MS Flat iron such as grills, gratings, etc with end of bars shouldered and/ or riveted or bolted with nuts and bolts framework complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed.

M&L machine cut kota stone slab flooring 20 to 25 mm thick over 15mm thick cement screed bed in CM 1:6 laid & jointed with grey cement slurry & pointed with pigment to match the shade of the slab including rubbing & polishing (Mirror finish) complete all as directed by Engr-in-Charge.

M & L for applying two coats of water proofing coating system by applying shalicry - 215 of STP ltd/Rain coat 601 of Dr Fixit/Barrier coat of Araldite Ltd. over a coat of respective primer including prepariation of old plastered surfaces or complete removal of existing treatment filling up of all cracks with approved crack fillers all as specified and directed.

M&L anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section.

Cutting out natural vegetation plants grown up on wall or roof including roots in any depth and in any position and making good the damaged portion of wall and roof by PCC 1:2:4 or CM 1:4 to match with the exiting surface of roof and wall complete all as specified and directed by Engr-in-Charge. Note :- Work to be carried out above 14th floor incl Lift wells

S & F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 50 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all specified and directed.

Removing demolished material outside MD land all as specified and directed. (Note:- For item No 01 to 131 Work to be carried out at G+14 bldg including top roof, parapet and shaft walls with scaffolding & safety measures in repairs and in patches).

MANIYA CONSTRUCTION CO

SHREE JAGDISH FURNITURE CO.

M/s. MAYUR ENTERPRISES