Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹45.2 L+₹1.6 L (3.56%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹45.9 L+₹2.2 L (5.16%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹46.6 L+₹2.9 L (6.75%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹47.1 L+₹3.5 L (8.05%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹42.8 L
EMD Value
₹85,500
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
ADDITION/ALTERATION IN BUILDING NO T-36 AT NORTH CAMP AND OTHER SANCTION WORKS UNDER GE(AF) BAMRAULI
2023_MES_596774_1
8780/E8
Open Tender
Civil Works
Works
180 days
GE (AF) Bamrauli
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹85,500
14 Jul 2023
19 May 2023
15 Jun 2023
19 May 2023
13 Jun 2023
5 Jun 2023
Amount
Dismantling, floor any type, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat complete all as specified and directed.
S&F 300x300 mmx7-8 mm thick ceramic non skid tiles in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 20mm thick screed bed in cement morta 1:6 complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and directed.
All as per srl item No. 4 above but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.
Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and directed.
All as per item No. 07 above but exc. 1.5 Sqm and not exc. 4 Sqm complete all as specified and directed.
M&L for Aluminium window (Powde coated) double leaf / three leaf with anodized aluminum frame sliding/openable including wheel powder coated of 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fitting necessary and gazing with 5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixtures & aluminum snap beads complete all as spesified and directed .
M&L for powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with 12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.
S & F powder coating anodised alumium glass partition wall with frames size 101.60x44.45x2.0mm thick and shutter alumium anodised and top rail 47.62x44.45x1.50mm and style 47.5x44.5x1.5mm, lock rail 83.5x44.45x1.50mm and bottom rail 150x44.50x2.50mm with 5.5mm thick plain glass including necessary fitting and fixture complete all as specified and directed.
S & F mild steel framed work such as door frame, grills, grating hold fast etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar including necessary welding, drilling hole complete.
S&F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of thickness 30 mm complete all as specified and as directed.
S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.
S&F Factory made internal PVC Door frame of size 100X45mm with a wall thickness of 5mm made out of extruded 5mm prelam PVC foam sheet of density 600kg/cbm manufactured by an ISO-9001-2008 certified compnay mitre cut at two corner and jointed with 4 Nos of 150mm long brackets of 15x15mm MS Square tube or fusion heat welding proces the two vertical door frames to be reinforced with 40x20mm MS tube of 19 gauge through out the framr. the door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC Fasteners a minimum of 4 nos of screws to be provided foe each vertical member & minimum 2nos for horizontal member etc complete all as specified and directed.
S&F 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M s tube of 19 gauge thickness and size 40x20mm for stiles as well as top lock & bottom rails MS frame shall have a cost of matel primer of approved make & manufacture MS frame shall be covered with heat moulded prelam'C' channel made from5mm (#.25) thick PVC sheet of density 600kg/cbm manufacture by an ISO-9001-2008 certified compnay of size 30mm thick & 110mm width forming stiles in which 100mm should be flat & 5mm should be taper and 5mm (#0.25) thick 135mm wide PVC sheet for top rail and bottom rail in which 125mm should be flat & 5mm taper on either side an additional 5mm thick PVC solvent cement adhesive peneling of 10mm prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 30mm wide x 5mm (#0.25) 30mm thick Pvc sheet beading either side & additional 30mm wide PVC beading as gap insert below top & bottom rail joined together using solvent cement adhesive 15mm thick 5mm0.25)x 3) 20mm wide croner PVC sheet as gap insert for top and bottom rail door to be fitted with frame with 3 nos ms powder coated butt hinges of size 100mm 25mm &n 50mm longer steel screws drilled suitable to pass through both the wall of the MS tube other hardware's of door should be fixed with 25mm 8mm size steel screws etc. complete as per manufactures Sfd.& drawing including iron mongery all fiting complete all as specified and directed.
S&F MS flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, conforming to FE 290 Ged E-165 complete all as specified and directed.
M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed plate for fixing holdfast etc complete all as specified and directed.
S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed.
Supply only butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100mm all as specified and as directed.
S&F aluminium handles, cast type, anodised of size 150mm all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.
S&F drapery rod 19mm inner dia (wall thickness not less than 1.60mm) stainless steel fancy type bracket fixed with rawl plug or screws on wall/beam and shall be provided with fancy finial at ends as approved by Garrison Engineer complete all as specified and directed. Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix "B" to particular specification.
S&F in curtain brackets stainless steel with matching with the curtain rod complete all as specified and directed.Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix "B" to particular specification.
S&F in door closer, hydraulically regulated, designation No 3 universal Aluminium type suitable, suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed door closer, aluminium (die cast) body, all as specified and as directed.
M&L for RCC B-1 (1:2:4) nominal mix using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintels over 1.50 m spanand similar work etc complete all as specified and directed
M&L for RCC B-1 (1:2:4) nominal mix using 20 mm graded stone aggregate in roof slabs supported walls beam and columns in floor roof landing,shelves etc
M & L for formwork to sides and soffites of floors or roof beam, beam haunching, girders, bressummers,lintels,cantilevers,shelves including supports,overhangs,etc also splays between floors and beams etc for fair finish.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Srl item No 30 above but 5mm dia and over upto & incl 10 mm dia as in stirrups complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.
S&F Pre painted galvalume aluminium zinc coating GI base plain steel sheet 0.50mm thick (TCT) of an colour having minimum tensile strength of 550 Mpa as ridge in roof fixed with self tapping screws as specified in particular specifications. Note :- (i) Outer colour of sheet shall be as approved by GE based on availability from manufacturer. (ii) Work shall be executed by the manufacturer's authorised Vendor only.
Supply and fix mild steel tubular section as in post / column / strut etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240.
M&L for cement concrete in walls or retaining walls ,Type B2(1:2:4) 40mm graded stone aggregate any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
Supply and fix in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications.
S&F in repairs 15 mm bore bib taps, with wall flange long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass furrel complete all as specified and directed.
S&F chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap complete all as specified and directed.
S&F chromium plated stainless steel towel rail with lower hanger with hooks fixed to wall with chromium plated brass screws 600mm long between flanges complete all as specified and directed. Note : Stainless steel towel rail cat Part No. AHS-1581 of make 'Jaquar' or equivalent model of make specified in Appendix 'B' to particular specifications.
Supply and fix in repair 600mmx450mm and 6mm thick bevelled edge looking mirror mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fioxed on wall complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed.
S&F chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long) complete all as specified and directed.
S & F Brass chromium plated mist wall mixer (hot and cold) non telephonic fixed to wall for bathroom complete all as specified and directed.
Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications.
Demolition & breaking AC drain pipes (salt glzed ware, AC,PVC) set in cement mortar,dia of pipe 100 mm complete all as specified and directed.
S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
M & L for cast iron floor trap of 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
M&L for cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.
S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed
S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.
M&L for 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
M&L for 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portionshall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
M&L for 12mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of one side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet back complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
Supply only autoclosing hydrolic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete all as specified and directed.
Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and directed.
Supply only 200mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and directed.
Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Providing & fixing false ceiling at all height with grg (glass Fibre reinforced Gypsum) false ceiling tile of size 595x595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRCO 50 to 0.75 as per IS 8225:1987, non combustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dripped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per Sqm including both sides) comprising of main T-runner of size 15x32mm of length 1200mm and sectinally intermediate cross T of size 15x32mm of length 600 mm to form gridmoudule of size 600mmx600mm, suspendd from ceiling using galvanised mild steel items (galvanised @80 grams per Sqm) i.e 50mm long, 8mm uter diamenter M-6 dash fastners 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron permeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partiotion with the help of plastic rawl plugs at 450mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer-in-Charge.
Supply & fixing of PVC wall panelling in double layer sheet for panel & inner framework. The strips should have in their centre a grave of 6mm & 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval between two PVC strip. The PVC strips shall be fixed to the wall using steel screws through the groove in the PVC strip by using PVC fasteners panels are joined through solvent content. Wall panelling S Side prelam sheet complete all as specified and directed.
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed
M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over cement wash with white cement complete all as specified and directed.
M&L for two coat of oil bound distemper on newly plastered surface on wall over 3mm thick wall care putty all as specified and directed.
M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for complete removing of existing treatment on wall surface and applying two coat of OBD over 3 mm thick birla white care Putty on wall to obtain smooth finish etc complete all as specified and directed.
M&L for complete removal of old decorated surface of wall, roof or sheet any type and applying two coat of ACE exterior paint over 1.50 mm thick putty complete all as specified and directed.
M & L for two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as sfd and directed.
M&L for preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer
S&F Floor door stopper of aluminium alloy body and tounge anodised,with hard drawn steel spring, with overall length of cover plate 140mm complete all as specified and directed.
S&F in repair rubber bead for wooden door complete all as specified and directed.
Surface excavation not exc 30 cm avg 15 cm thick and getting out in loose/soft soil complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed.
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc complete all as specified as directed.
Removing excavated material exc. 250 m but n. exc. 500 m and depositing where directed.
M&L for 80 mm thick rubber moulded machine pressed precast concrete interlocking paver block rubber moulded and coloured pattern any shape and size confirming to IS 15658-2006 of M-35 with coloured cement and pigment complete all specified and directed.
M&L for Sand filling under floors or foundations including watering and consiladition complete all as specified and directed.
Returning filling in, including of spreading, levelling watering and well rammed in layers n exc 25 cm complete all as specified and directed.
M&L for Soakage wells excavation, in ant type of soil, foundations in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with with brick bats of size 1.8 mtr dia x 4.5 mtr effective depth complete all as specified and directed.
M&L for RCC NP3 Pipe dia 150mm bore laid and jointed with collars in cement mortar complete all as psecified and directed.
M&L for PCC 1:3:6 type C2 using (40mm graded stone agg) to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. (inner girth only measured)
(g) INCOMMING: MCCB 4 Pole 630Amp 415 volt thermal adjustable ,type with 50 KA breaking capacity & spreader both side as outgoing cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB) (h) OUTGOING: MCCB 4 Pole 400 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB) (j) MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB)
(g) INCOMMING: MCCB 4 Pole 630Amp 415 volt thermal adjustable ,type with 50 KA breaking capacity & spreader both side as outgoing cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB) (h) OUTGOING: MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB) (j) MCCB 4 Pole 160 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoing cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB) (k) MCCB 4 Pole 125 Amp 415 volt thermal adjustable ,type with 16 KA breaking capacity & spreader both side as outgoing cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB).
(g) INCOMMING: MCCB 4 Pole 400 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as Incomming cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB) (h) OUTGOING: MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoing cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB). (j) MCCB 4 Pole 160 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB) . (k) MCB 2 Pole 32 Amp, 415 volt thermal adjustable ,type with 16 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB).
Supply, fixing (in replacement), connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, totally enclosed of size not less that 900x600x500mm and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gaket and sealed mounted on PCC blocks double door type with locking arragnedment with handle at front and openable at front &back bothe side with required hinges heavy duty, compartemtalised suitably including provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- (a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 300 amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set. (b) Phase indication lamp, LED type(set of 3) -1 Set (c) Ammeter anolog type having measuring range (0-300) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens (d)Replacement of volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE (e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4) cement sand etc complete all as specified and directed.
Supply, fixing & testing of LT distribution panel board (in replacement), made out of 2 mm thick MS sheet of size not less than 600x450x200mm duly painted with two coats of synthetic enamelled paint over one coat of red oxide primer wall mounted/semi-grouted in wall with locking arrangement, double door type, compartmentalised and provision for tapping incoming & outgoing electric connections with suitable size of lugs, glands, one MCCB will be mounted on proper din railes and comprising of the followings :- (a) Aluminium busbar chamber TPN of 200 amps rating (set of 4 strips) (b) Phase indication lamp-set of 3 (c) MCCB 4 pole 415 Volts, 50 Hz, 100 amps rating, 25 KA breaking capacity - 01 No.(Incomming ) (d) MCB TPN 63 A -2 No and MCB SPN 32 A -3Nos as out going cotrol (Note :- Make of MCCB/MCB : Schneider/L&T/ABB)
S&F (in replacement) following items in the existing out door/ indoor LT panels and connection with using aluminum lugs/ferruls incl disconnection & connection of cable and making necessary alteration in panel/door using welding wk and cutting as required for proper fixing & connection complete all as specified and directed as below :- (Note :-Make of MCCB/MCB : Schneider/L&T/ABB)
(a) MCCB 4 Pole 100 amps rating, 16 KA breaking capacity, 415 Volt
(b) MCCB 4pole 125 amps rating, 16 KA breaking capacity with spreader at both side
(c) MCCB 4 pole150/160 amps rating, 36 KA breaking capacity with spreader at both side
(d) MCCB 4 pole200 amps rating, 36 KA breaking capacity with spreader at both side
(e) MCCB 4 pole250 amps rating, 36 KA breaking capacity with spreader at both side
(f) Microprocessor based MCCB 4pole 250 amps rating, 36 KA breaking capacity with spreader at both side
(g) Microprocessor based MCCB 400 amps rating, 36 KA breaking capacity with spreader at bothe side
(k) CTs of existing ratio and capacity fixed in LT panels and connect with ammeter
(l) Indicator lamp, LED type incl 1.5 sqmm wire for connection to desired point of bus bar.
(m) MCB TPN 100 amps, 'C' series, 415 volt
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 Core aid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Excavation in trenches not exceding 1.5m wide and not exceding 1.0 sq m on plan and not exceding 1.5m depth and getting out soft soil all as specified and directed.
Removing excavated material not exceding 50 m and depostingwhere directed at a level not exceding 1.5 m above the starting pointall as specified and directed.
M & L for sand cushioning all around the cable for protection by natural sand all as specified and directed.
Supplying and Laying old size bricks of size 230mm x 113 mm x 75 mm for cable protection all as specified and directed.
Supply and Laying in trenches for road/plinth and fixing alongwith pole/wall GI Tube 80 mm light grade for protection of cable all as specified and directed.
Supply and Laying in trenches for road/plinth and fixing alongwith pole/wall GI Tube 50 mm light grade for protection of cable all as specified and directed.
Supply and Laying in trenches for road/plinth and fixing alongwith pole/wall GI Tube 40 mm light grade for protection of cable all as specified and directed.
M & L for boring holes (manually) under road, hard standing without damaging surface for 80/50/40 mm dia GI pipe etc complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to galvanised strip 32x6mm as earth lead by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe light grade,40mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqm) and frame of angle iron 25 X 25 X 3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion.
Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit medium grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-
(a) One light/fan/bellpoint controlled by one switch single pole one way
(b) All as per item No 117.00 here-in-before but one 3 pin 6 amp switch socket out let independent .
(c) All as per item No -117.00 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete .
All as per item No 117 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and one no. 4.0 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.
Supply and fix switch modular flush 6A single pole one way ISI marked
Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined all as specified and directed.
Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked
Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.
Supply and fix ceiling rose surface bakelite 60x25mm three terminal complete all as specified and directed.
Supply and fix in replacement electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type complete all as specified and directed.
S&F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, system lumen efficiency >90 lumen/watt, 6500k and including connecting from ceiling rose to fitting complete all as specified and directed.
Supply and fix in replcement flood light 30 watt 240 volt 50 Htz 3000/6500K 120 lumen/watt IP-65 complete all as spd and directed.
Supply and fix LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.
S&F of Fresh air fan, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete all as specified and directed.
S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed.
S & F of exhaust fan 300/230 mm (Metal body) sweep complete with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete all as specified and directed.
Supply & fix MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.
Supply & fix MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.
Supply and fix MCB, single pole and neutral, 230 volts, 32 to 40 Amp rating, 'C' series fixed in DBs catered here-in-before.
Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge
S & F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp complete all as specified and directed.
Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed.
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe suitable size with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltrs having element 1.5/2 KW BEE star rating incl taking down old and deposted to MES store yard
M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for conceal conduit and making good to match with existing finish.
M& L for sub main wiring with 2 run of single core PVC insulated and PVC unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealconduit and making good to match with existing finish.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
Mohit Enterprises
M/S Aquarius Construction
M/S SWASTIK BUILDERS
M/S SATISH KUMAR
chauhan construction
Aditi Construction Company
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .