SPECIAL REPAIRS TO TOILET ANNEXE NEAR BLDG NO. T-70 AT ATS BELAGAVI

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) of any thickness and in any position, rubbish off the premises complete all as specified and directed.

S&F 32mm CPVC Gate valve fixed to CPVC pipe through Chemical complete all as specified and directed

Dismantling and breaking up drain pipes (salt glazed ware, AC, reinforced concrete, PVC or Cast iron) set in cement mortar of size 100mm/75mm fixed over wall or in floor including clamps etc., complete all as specified and directed.

Dismantling of brickwork, concrete masony work or stone/boulder masonry work, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement rendering/plastering of any thickness and of any description including raking out joints, hacking for key, scrubbing down with water etc., over wall or ceiling surfaces of any description complete all as specified and directed.

Taking up or down 20mm bore dia, mild steel or of any material water tubing and fittings/connections etc., fixed over wall or in floor including necessary cutting/chasing and making good in cement mortar 1:4 complete all as specified and directed.

Taking up or down 25/32mm bore dia, mild steel or of any material water tubing and fittings/connections etc., fixed over wall or in floor including necessary cutting/chasing and making good in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5Sqm each but not exceeding 4Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified and directed.

M&L for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including preparation of surface and applying two coats oil bound distemper over a coat of primer complete all as specified and directed Note:- Metal frame work shall be measured and paid separately

M&L for Gl frame work (size of grid not exc. 605mmX605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat iron 40mm x 3mm of required size connecting to main frame and ceiling complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary PCC bedding, "P" or "S" PVC trap connected to PVC/CI pipes complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, excluding flushing cistern and flush pipe) including Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including "P" or "S" PVC trap connected to PVC/CI pipes complete all as specified and directed.

S&F in repairs vitreous China wash hand basin, white in colour, flat back of size 550X400X200mm including pedestal, and 32mm bore dia CP finish copper alloy waste fitting/coupling, 32mm bore dia PVC waste pipe complete all as specified and directed. Make: Cera, Cat Part No. S2040157 & 2090101 or equivalent make of Hindware, Parryware, Jaquar (Cat Part No. ECS-WHT-801 & ECS-WHT-301

S&F in repair fancy type 15mm bore dia short body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed.

S&F in repair 15mm bore dia fancy angle stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed.

S&F in repair 10 liter PVC dual flush valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, and handle/push type, including 32mm bore dia PVC long/short flusing pipe for IWC/EWC and fixing brackets complete all as specified and directed.

S&F in repair 15mm bore dia fancy wash basin long body pillar tap, cast copper alloy, chromium plated including necessary connecting pipe, screwed down, screwed for water pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make: Prayag, Shakti, Hindware, Cera

S&F frame size 45X85mm, Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including M.S. hold fast/ lugs or SS dash fasteners).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid one side decorated and other side plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified & directed. Make: Rajshri Plastiwood or equivalent make as specified in list of make of Particular Specifications

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, jointed with solvent/chemical to pipe & fittings fixed to wall with necessary mild steel clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, jointed with solvent/chemical to pipe & fittings laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, jointed with solvent/chemical to pipe & fittings fixed to wall with necessary mild steel clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints jointed with solvent/chemical to pipe & fittings, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) floor trap of outlet dia 75mm, plain with SS gratings 125X125mm size with openable circular grating with or without hole including jointing with solvent cement including fixing to pipe properly with solvent/chemical complete all as specified and directed.

S&F PVC (SWR) bends with access door for 75mm bore pipe jointed with solvent/chemical to pipe & fittings complete all as specified and directed.

S&F PVC (SWR) bends with access door for 110mm bore pipe jointed with solvent/chemical to pipe & fittings complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal size with access door for 75mm bore pipe jointed with solvent/chemical to pipe & fittings complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe jointed with solvent/chemical to pipe & fittings complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia jointed with solvent/chemical to pipe & fittings complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia jointed with solvent/chemical to pipe & fittings complete all as specified & directed.

M&L for coloured glazed ceramic tiles joint less/edge cutted of size 600mmx300mmx6mm to 7mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in ready made tile grout to match the shade of tiles laid over and including 15mm thick backing/rendering in cement mortar (1:4) complete all as specified and directed. Note:- Those tiles fixed right angled to each other, the each tile should be chamfered/trim/sharp at 45 degrees at joint/corner/edge, the quoted rates are inclusive of this.

M&L for coloured non-skid joint less ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm in floor, set and jointed in neat cement slury and pointed in tile grout with pigment to match the shade of tiles laid over and including cement screed bed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified and directed.

S&F in repairs tubular brass chromium plated Towel rail 20mm dia "D" type 60cm long between flanges complete all as specified and directed.

S&F 100mm size medium weight stainless steel butt hinges including necessary stainless steel screws of reqd size complete all as specified and directed.

S&F 125mm long cast type anodised aluminium handle type complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

Supplying and laying of 20mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, jointed with solvent/chemical to pipe & fittings fixed over wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.

Supplying and laying of 25mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size jointed with solvent/chemical to pipe & fittings, fixed over wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.

Supplying and laying of 32mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, jointed with solvent/chemical to pipe & fittings fixed over wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.

S&F Toilet paper holder with flat recessed type stainless steel material complete all as specified and directed.

M&L for plain cement concrete, 25mm thick, (1:2:4), type B-0, (using 12.5mm nominal size crushed and graded stone aggregate) for levelling/to receive screed for laying floor finish, finished fair and even complete all as specified and directed.

M&L for plain cement concrete, 75mm thick, (1:3:6), type C-1, (using 20mm nominal size crushed and graded stone aggregate) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified and directed.

M&L for plain cement concrete, 75mm thick, (1:4:8), type D-1, (using 20mm nominal size crushed and graded stone aggregate) for sub-base of floors or of similar type of work finished fair and even complete all as specified and directed.

M&L for for cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) as in coping, hold fast or of similar type of work including necessary form work complete all as specified and directed.

M&L for pre-cast cement concrete block, (1:3:6), type C1 (using 20mm nominal size, crushed and graded stone aggregate) masonry with solid blocks and setting in cement mortar (1:4) having minimum compressive strength of 50 Kg per Sqcm complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:6 over walls surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 over walls surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

Supply, hoisting and fixing of triple layer, ISI marked, 1000 Litre Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position all as specified in SSR Part I including PTMT 25mm bore ball valve high pressure with epoxy coated aluminium rod and high density plastic ball , two nos new tank nipples of PTMT material 20/25mm bore dia as required including dismantling existing water tanks of any type complete all as specified and directed.

S&F Aluminium window and ventilator shutters/Al louverd strip powder coated (minimum thickness of powder coating 50 micron), side/top hung type without sash bars, aluminium sections of not less than 60mm width & 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, peg stays 150mm long (1 no. per window), hinges 75mm long (2/3 nos.) suitable handle (1 no.) complete all as specified & directed.

M&L for two coats of emulsion ,oil bound distemper on walls, pillasters, cornices, etc., on newly plastered surfaces using spunge roller including one coat of primer over 2mm thick wall care putty (in two coats) complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing each other etc. and bathroom louverd sections complete all as specified and directed.

M&L for 50mm bore dia high density polyethylene pipes (HDPE) and fittings of pressure rating 6kgf/cm² fixed complete to walls, ceilings or in floors as drain out pipe etc., including necessary cutting and chasing in wall or floor of any description complete all as specified and directed.

S&F 16mm to 18mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

M&L for 16mm to 18mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(risers), jambs, pillars, dado/skirting and like laid over cement screed bedded with 15mm thick cement mortar (1:4) and jointed with grey cement slurry including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

M&L for machine cut Cudappah stone slab 20mm to 25mm thick laid over and including cement screed base 15mm thick in CM(1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in floor/dado including rubbing and polishing complete all as specified and directed.

M&L for full round and polished moulding (as per main stone polish) to edges of stone slabs upto 20mm thick, such as in window cill, jambs, counters, steps etc. and of other similar situations complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.00 metre long SS braided hose/connection pipe including ABS wall hook connections and fixed in position complete as specified and directed.

M&L for on site as per site requirement 12mm thick panel board (High Pressure Laminated (HPL) ) as in partition wall and door shutter. The Panel shall be fixed in wall through standard SS profile(Wall bracket). The top of Panel shall be fixed through standard SS profile( H-type top rail with cover), The "T" junction of panel shall be fixed through standard SS profile. The bottom of panel shall be fixed through standard SS profile adjustable foot of maximum 75mm height. The Panel door shall have standard SS, hinge(spring loaded butt hinge), Door Knob pair, privacy thumbturn, locking arrangement, floor anchor, occupancy indicator etc. The each shutter shall have one SS Coat Hook cum door stopper complete all as specified and directed. Make:-HPL/Greenlam Laminates, Alstone India, Merino Laminates

S&F in repairs 15mm bore dia fancy two way bib tap (combination of bib tap and angle stop valve), chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed.

Taking down point wiring copper/ aluminium (light, fans, socket or power complete fitting such as switches, ceiling rosés pendants, regulators, sockets etc to be measure separately) removing materials from site and making goods the disturb surface of walls/ ceilings/floors etc complete all as specified and directed

M&L for point wiring for one light/exhaust fan/fan point controlled by one switch with two runs of single core 1.5 Sqmm (Nominal area) PVC insulated unsheathed multistranded FRLS copper conductor cable confirming to IS drawn through and including non metallic PVC conduit concealed/semi concealed including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sqmm FRLS copper conductor as earth wire connected to common earth dolly and earth in distribution board including cutting of stone masonary/ wall complete all as specified and directed

S&F switch modular type single pole 6 Amps one way AC 230V, 50Hz for one light/exhaust fan/fan point controlled by one switch complete all as specified and directed

S&F celing rose surface backlite 63 mm dia two to three terminals complete all as specified and directed

M&L for sub main wiring with 2runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable along with one run of 4 Sq.mm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly including taking down old / perished sub main wiring of any size aluminum condutor cable along with TW batten/ PVC conduit and making good the disturbed surface of wall complete all as specified and directed .

S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repairs round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades and frame and louvers complete all as specified and directed

S&F in repairs SPN DB 4 Way with 200 amps rated bus bar double door complete all as specified and directed

S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed .

RAJENDRA KRISHNA SARAF (BID ID -3150235)

M/S ADITYA CONSTRUCTIONS (BID ID -3149489)