Erection of Street Lighting arrangement from newly installed High Mast Lighting Tower near Haniman Mandir to Three-way Junction point on Transporting Road Under GM unit, Piparwar Area.

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone ggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Supplying and erection of 100 mm X 65 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Erection of ACSR conductor of 7/2.11 mm to 7/3 mm diameter including binding etc. as required

Angle / falt and steel sheet, 50mm x 50mm x 6 mm angle iron

Painting of Pole

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Angle / Flat iron and steel lsheet , 50mm x 6 mm flat liron

Screw, nut , bolts and other accessories, 10 mm x 25 mm long tinned brass bolt with nut etc.

providing and fixing of 6 SWG dia GI wire on surface or in recess for loop earthing as required

Total impact of GST for the purpose of CTC

M/S SHAILESH KUMAR SINGH

M/s Rajkumar Mahto