120/G/TC/Kanker/ Annual Repair work of Residential and Non Residential Building Under P.W.D. (B/R) S

DETAILED ESTIMATE FOR ANNUAL REPAIR WORK OF RESIDENTIAL & NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION KESHKAL

Part-I Dismantling

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY UNIT RATE AMOUNT

1 16.36 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base.

H.S. Buiding at Bharripara 1 5.8 5.8

post mattrics boys hostel 1 9 5.1

100 seater girls hostal at Vishrampuri 1 7.5 4.75

high school Badbattar 1 7.5 4.75

I.T.I. Hostel vishrampuri 1 11.9 3

Old Tahsil office at Dhanora 1 8.4 5.6

16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

post mattrics boys hostel 1 2

100 seater girls hostal at Vishrampuri 1 2

high school Badbattar 1 2

I.T.I. Hostel vishrampuri 1 3

Old Tahsil office at Dhanora 1 3

16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..

high school Building at Pipra 1 3 3

16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead.

post mattrics boys hostel 4 4

100 seater girls hostal at Vishrampuri 1 1

high school Badbattar 3 3

I.T.I. Hostel vishrampuri 4 4

Old Tahsil office at Dhanora 3 3

high school Building at Pipra 3 3

16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 16.30 dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead.

post mattrics boys hostel 1

100 seater girls hostal at Vishrampuri 1

high school Badbattar 1

I.T.I. Hostel vishrampuri 1

Old Tahsil office at Dhanora 1

16.15 Dismantling thatch roofing including mats, bamboo, jaffri etc. complete including stacking of serviceable materials & disposal of unserviceable materials within 50 m lead.

post mattrics boys hostel 1 3.1 2.3

I.T.I. Hostel vishrampuri 1 3.1 2.3

16.43 Demolishing cement concrete including disposal of material within 50 metre lead.

16.43.1 1:4:8 or leaner mix

H.S. Buiding at Bharripara 1 4.3 4.2 0.05

post mattrics boys hostel 1 4.3 4.2 0.05

100 seater girls hostal at Vishrampuri 1 4.3 4.2 0.05

high school Badbattar 1 2.8 2.2 0.05

Old Tahsil office at Dhanora 1 2.8 2.2 0.05

DETAILED ESTIMATE FOR ANNUAL REPAIR WORK OF RESIDENTIAL & NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION KESHKAL

Part-II Reconstruction

S.N S.O.R. ITEM No. PARTICULARS MEASUREMENTS QTY UNIT RATE AMOUNT

1 12.76.1 Providing and laying Glazed Vitrified floor tiles (GVT+PGVT) with digital print of random design with water absorption less then 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below(+/- 10 mm) land on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete- Size 600x600mm thickness 9 to 10mm

H.S. Buiding at Bharripara 1 5.8 5.8

post mattrics boys hostel 1 9 5.1

100 seater girls hostal at Vishrampuri 2 7.5 4.75

high school Badbattar 1 7.5 4.75

8.1 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.

8.1.2 Sal, bijasal, benteak, khair, haldu

H.S. Buiding at Bharripara 1 1.1 0.13 0.01

post mattrics boys hostel 4 1.9 0.1 0.1

100 seater girls hostal at Vishrampuri 2 2 0.13 0.01

high school Badbattar 4 2 0.13 0.01

I.T.I. Hostel vishrampuri 1 0.75 0.13 0.01

8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (PartI), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. post mattrics boys hostel

8.12.2 35 mm. thick (single leaf)

high school Badbattar 4 1 2.1

sqm 1704 100 seater girls hostal adkachepda

8.12.3 30 mm. thick (single leaf)

I.T.I. Hostel vishrampuri 2 1.1 2.1

1 0.9 2.1 high school bld.mayuerdonger

H.S. Buiding at Bharripara 4 1.1 1.9

2 0.9 1.9 100seater boyes hostel near jilla panchayat

Old Tahsil office at Dhanora 2 0.9 2

high school Building at Pipra 2 0.9 2

8.99 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws:

8.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws:

14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work.

12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete.

12.36.1 Light shade using white cement

17.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :

17.1.2 Thickness more than 15mm and upto 20mm

14.85 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.

14.85.1 Two coats up to final finish applied @ 0.750Kg/ 10Sqm

deductions 1 0.95 2

deductions 1 0.9 2

deductions 1 0.9 2

17.7 Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required:

17.7.3 White Orissa pattern W.C. pan of size 580x440 mm

17.8.1 Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required : 17.8.1 White pedestal type each

4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

8.102 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws:

8.103 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws:

14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work.

7.4 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in:

7.4.1 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)

7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand)

1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils.

3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).

9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.

9.3.1 Electric resistance or induction butt welded tubes Grade-250

7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level.

7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand)

18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type 1 8 each 1003

18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete. White 1 7 each 1134

18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black 1 8 each 527

18.9.2 Coloured 1 7 each 601

18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 1 5 each 1216

18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 1 6 each 796

18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 1 7 each 52

18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 1 10 metre 155

18.76.2 110 mm dia pipe. 1 10 metre 227

19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 1 150 metre 94

19.4.2 20 mm nominal outer dia .Pipes. 1 100 metre 128

19.4.3 25 mm nominal outer dia .Pipes. 1 40 metre 169

19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 1 50 metre 113

19.5.2 20 mm nominal outer dia .Pipes. 1 50 metre 142

19.5.3 25 mm nominal outer dia .Pipes. 1 90 metre 181

19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes 1 10 metre 78

19.6.2 20 mm nominal outer dia pipes 1 8 metre 103

19.6.3 25 mm nominal outer dia pipes 1 10 metre 140

19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 1 2 each 170

19.10.2 32 mm nominal bore 1 3 each 190

19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 1 2 each 72

19.11.3 25 mm nominal bore 1 3 each 99

19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 1 5 each 157

19.13.2 Bib cock (350 grams) 1 6 each 201

19.13.3 Stop cock (350 grams) 1 5 each 201

19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 1 2 each 325

19.14.2 Long nose bib cock (500 grams) 1 5 each 387

19.14.3 Long body bib cock (500 grams) 1 6 each 362

19.14.4 Piller Cock (400 grams) 1 8 each 338

19.14.5 Two way bib cock (800 grams) 1 6 each 602

19.14.6 Stop cock (concealed) (600 grams) 1 2 each 420

19.14.7 Angle valve for basin mixer and geyser points (450 grams) 1 2 each 325

19.14.8 Basin mixer pillar tap with spout (1000 grams) 1 5 each 1061

19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 1 4 each 1061

19.14.10 Wall mixer with elegant knob (1400 grams) 1 4 each 1519

19.14.11 Hand shower set with flexible extension pipe 1 5 each 667

19.14.12 Bottle trap set with extension pipes 1 4 each 402

19.14.13 Toilet paper holder 1 4 each 211

19.14.14 Soap dish plate 1 4 each 139

19.14.15 Shower rose (revolving type) (150mm) 1 4 each 229

19.14.16 Towel rail (600mm long x 20mm dia) 1 4 each 287

19.14.17 Towel ring (150 mm dia) 1 6 each 216

19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 1 5 each 1499

19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 1 5 set 658

19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 1 23 set 490

19.15 Providing and fixing stainless steel drain jali of approved make/quality. 1 10 each 43

19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 1 10 each 371

19.16.2 32 mm nominal bore 1 15 each 434

19.40.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre : 80 mm dia C.I. pipe 1 18 metre 111

19.40.2 100 mm dia C.I. pipe 1 10 metre 115

19.40.4 150 mm dia C.I. pipe 1 10 metre 121

20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 1 10 metre 138

general abstract

DETAILED ESTIMATE FOR ANNUAL REPAIR WORK OF RESIDENTIAL & NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION KESHKAL

S.No. DETAILS OF WORK AMOUNT Rs. (Lacs)

1 DISMENTLING WORK

2 RECONSTRUCTION WORK

N.I.T. SCHEDULE FOR ANNUAL REPAIR WORK OF RESIDENTIAL & NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION KESHKAL

SOR of Building Work for P.W.D. w.e.f. 10-06-2026 PAC LACS

S. No. Chapter No Item No Sub Item No Particulars Quantity Unit Rate Amount

1 16 16.36 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 233.53 sqm 19 4437

16 16.26 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 14 each 85 1190

16 16.27 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 57 171

16 16.28 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 19 each 40 760

16 16.29 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 16.30 dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead. 6 kg. 0.6 4

16 16.15 16.15 Dismantling thatch roofing including mats, bamboo, jaffri etc. complete including stacking of serviceable materials & disposal of unserviceable materials within 50 m lead. 28.259999999999998 sqm 9 254

16 16.43 16.43.1 Demolishing cement concrete including disposal of material within 50 metre lead. 1:4:8 or leaner mix 10.9835 cum 280 3075

12 12.76 12.76.1 Providing and laying Glazed Vitrified floor tiles (GVT+PGVT) with digital print of random design with water absorption less then 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below(+/- 10 mm) land on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete- 186.415 sqm 819 152674

8 8.1 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.2675600000000001 cum 51893 13884

8 8.12 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (PartI), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 15.96 sqm 1704 27196

8 8.99 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm 42 each 66 2772

8 8.1 8.100.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 34 each 45 1530

14 14.62 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 953.48 sqm 54 51488

12 12.36 12.36.1 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. Light shade using white cement 308.78000000000003 sqm 679 209662

17 17.1 17.1.2 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness more than 15mm and upto 20mm 542.64 sqm 126 68373

14 14.48 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Two coats up to final finish applied @ 0.750Kg/ 10Sqm 756.3699999999998 sqm 34 25717

17 17.7 17.7.3 Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required: White Orissa pattern W.C. pan of size 580x440 mm 6 each 1605 9630

17 17.8 17.8.1 Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required : White pedestal type each 5 each 1101 5505

4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 48.71699999999999 cum 3244 158038

8 8.102 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 48 each 29 1392

8 8.103 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 74 each 43 3182

14 14.71 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 65.95299999999999 sqm 113 7453

7 7.4 7.4.1 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 4.284 cum 2774 11884

7 7.6 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 4.284 cum 2877 12325

11 11.3 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 46.599999999999994 sqm 91 4241

1 1.1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 0.864 cum 157 136

3 3.1 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 0.864 cum 2525 2182

9 9.3 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 625.812 kg. 75 46936

7 7.11 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level. Cement Mortar 1:4 (1 cement : 4 coarse sand) 3.8000000000000003 sqm 325 1235

18 18.6 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type 8 each 1003 8024

18 18.8 18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete. White 7 each 1134 7938

18 18.9 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black 8 each 527 4216

18 18.9 18.9.2 Coloured 7 each 601 4207

18 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5 each 1216 6080

18 18.18 18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 6 each 796 4776

18 18.55 18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 7 each 52 364

18 18.76 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 10 metre 155 1550

19 19.4 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 150 metre 94 14100

19 19.4 19.4.2 20 mm nominal outer dia .Pipes. 100 metre 128 12800

19 19.4 19.4.3 25 mm nominal outer dia .Pipes. 40 metre 169 6760

19 19.5 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 50 metre 113 5650

19 19.5 19.5.2 20 mm nominal outer dia .Pipes. 50 metre 142 7100

19 19.5 19.5.3 25 mm nominal outer dia .Pipes. 90 metre 181 16290

19 19.6 19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes 10 metre 78 780

19 19.6 19.6.2 20 mm nominal outer dia pipes 8 metre 103 824

19 19.6 19.6.3 25 mm nominal outer dia pipes 10 metre 140 1400

19 19.1 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 2 each 170 340

19 19.1 19.10.2 32 mm nominal bore 3 each 190 570

19 19.11 19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 2 each 72 144

19 19.11 19.11.3 25 mm nominal bore 3 each 99 297

19 19.13 19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 5 each 157 785

19 19.13 19.13.2 Bib cock (350 grams) 6 each 201 1206

19 19.13 19.13.3 Stop cock (350 grams) 5 each 201 1005

19 19.14 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 2 each 325 650

19 19.14 19.14.2 Long nose bib cock (500 grams) 5 each 387 1935

19 19.14 19.14.3 Long body bib cock (500 grams) 6 each 362 2172

19 19.14 19.14.4 Piller Cock (400 grams) 8 each 338 2704

19 19.14 19.14.5 Two way bib cock (800 grams) 6 each 602 3612

19 19.14 19.14.6 Stop cock (concealed) (600 grams) 2 each 420 840

19 19.14 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 2 each 325 650

19 19.14 19.14.8 Basin mixer pillar tap with spout (1000 grams) 5 each 1061 5305

19 19.14 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 4 each 1061 4244

19 19.14 19.14.10 Wall mixer with elegant knob (1400 grams) 4 each 1519 6076

19 19.14 19.14.11 Hand shower set with flexible extension pipe 5 each 667 3335

19 19.14 19.14.12 Bottle trap set with extension pipes 4 each 402 1608

19 19.14 19.14.13 Toilet paper holder 4 each 211 844

19 19.14 19.14.14 Soap dish plate 4 each 139 556

19 19.14 19.14.15 Shower rose (revolving type) (150mm) 4 each 229 916

19 19.14 19.14.16 Towel rail (600mm long x 20mm dia) 4 each 287 1148

19 19.14 19.14.17 Towel ring (150 mm dia) 6 each 216 1296

19 19.14 19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 5 each 1499 7495

19 19.14 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5 set 658 3290

19 19.14 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 23 set 490 11270

19 19.15 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 10 each 43 430

19 19.16 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 10 each 371 3710

19 19.16 19.16.2 32 mm nominal bore 15 each 434 6510

19 19.4 19.40.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre : 80 mm dia C.I. pipe 18 metre 111 1998

20 20.1 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 10 metre 138 1380

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Name of work:- WHITE WASHING & COLOUR WASHING WORK OF RESIDENTIAL & NON RESIDENTIAL BUILDING FOR THE YEAR 2026-27 UNDER SUB-DIVISION KESHKAL

S. No. Department SOR Year S.OR. Item No. ITEM DESCRIPTION Quantity Rate Unit Amount Serial no. Credit item (0/1) Field (Y/N) Reserve EMD Amount

1 PWD BUILDING 2026 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 233.53 19 sqm 4437 0 N 0 0

PWD BUILDING 2026 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 14 85 each 1190 0 N 0 0

PWD BUILDING 2026 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 57 each 171 0 N 0 0

PWD BUILDING 2026 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 19 40 each 760 0 N 0 0

PWD BUILDING 2026 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 16.30 dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead. 6 0.6 kg. 4 0 N 0 0

PWD BUILDING 2026 16.15 Dismantling thatch roofing including mats, bamboo, jaffri etc. complete including stacking of serviceable materials & disposal of unserviceable materials within 50 m lead. 28.259999999999998 9 sqm 254 0 N 0 0

PWD BUILDING 2026 16.43.1 Demolishing cement concrete including disposal of material within 50 metre lead. 1:4:8 or leaner mix 10.9835 280 cum 3075 0 N 0 0

PWD BUILDING 2026 12.76.1 Providing and laying Glazed Vitrified floor tiles (GVT+PGVT) with digital print of random design with water absorption less then 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below(+/- 10 mm) land on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete- 186.415 819 sqm 152674 0 N 0 0

PWD BUILDING 2026 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.2675600000000001 51893 cum 13884 0 N 0 0

PWD BUILDING 2026 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (PartI), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 15.96 1704 sqm 27196 0 N 0 0

PWD BUILDING 2026 8.12.3 30 mm. thick (single leaf) 57.13600000000001 1557 sqm 88961 0 N 0 0

PWD BUILDING 2026 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm 42 66 each 2772 0 N 0 0

PWD BUILDING 2026 8.100.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 34 45 each 1530 0 N 0 0

PWD BUILDING 2026 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 953.48 54 sqm 51488 0 N 0 0

PWD BUILDING 2026 12.36.1 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. Light shade using white cement 308.78000000000003 679 sqm 209662 0 N 0 0

PWD BUILDING 2026 17.1.2 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness more than 15mm and upto 20mm 542.64 126 sqm 68373 0 N 0 0

PWD BUILDING 2026 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Two coats up to final finish applied @ 0.750Kg/ 10Sqm 756.3699999999998 34 sqm 25717 0 N 0 0

PWD BUILDING 2026 17.7.3 Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required: White Orissa pattern W.C. pan of size 580x440 mm 6 1605 each 9630 0 N 0 0

PWD BUILDING 2026 17.8.1 Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required : White pedestal type each 5 1101 each 5505 0 N 0 0

PWD BUILDING 2026 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 48.71699999999999 3244 cum 158038 0 N 0 0

PWD BUILDING 2026 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 48 29 each 1392 0 N 0 0

PWD BUILDING 2026 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 74 43 each 3182 0 N 0 0

PWD BUILDING 2026 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 65.95299999999999 113 sqm 7453 0 N 0 0

PWD BUILDING 2026 7.4.1 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 4.284 2774 cum 11884 0 N 0 0

PWD BUILDING 2026 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 4.284 2877 cum 12325 0 N 0 0

PWD BUILDING 2026 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 46.599999999999994 91 sqm 4241 0 N 0 0

PWD BUILDING 2026 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 0.864 157 cum 136 0 N 0 0

PWD BUILDING 2026 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 0.864 2525 cum 2182 0 N 0 0

PWD BUILDING 2026 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 625.812 75 kg. 46936 0 N 0 0

PWD BUILDING 2026 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level. Cement Mortar 1:4 (1 cement : 4 coarse sand) 3.8000000000000003 325 sqm 1235 0 N 0 0

PWD BUILDING 2026 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type 8 1003 each 8024 0 N 0 0

PWD BUILDING 2026 18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete. White 7 1134 each 7938 0 N 0 0

PWD BUILDING 2026 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black 8 527 each 4216 0 N 0 0

PWD BUILDING 2026 18.9.2 Coloured 7 601 each 4207 0 N 0 0

PWD BUILDING 2026 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5 1216 each 6080 0 N 0 0

PWD BUILDING 2026 18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 6 796 each 4776 0 N 0 0

PWD BUILDING 2026 18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 7 52 each 364 0 N 0 0

PWD BUILDING 2026 18.55.2 75 mm 7 48 each 336 0 N 0 0

PWD BUILDING 2026 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 10 155 metre 1550 0 N 0 0

PWD BUILDING 2026 18.76.2 110 mm dia pipe. 10 227 metre 2270 0 N 0 0

PWD BUILDING 2026 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 150 94 metre 14100 0 N 0 0

PWD BUILDING 2026 19.4.2 20 mm nominal outer dia .Pipes. 100 128 metre 12800 0 N 0 0

PWD BUILDING 2026 19.4.3 25 mm nominal outer dia .Pipes. 40 169 metre 6760 0 N 0 0

PWD BUILDING 2026 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 50 113 metre 5650 0 N 0 0

PWD BUILDING 2026 19.5.2 20 mm nominal outer dia .Pipes. 50 142 metre 7100 0 N 0 0

PWD BUILDING 2026 19.5.3 25 mm nominal outer dia .Pipes. 90 181 metre 16290 0 N 0 0

PWD BUILDING 2026 19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes 10 78 metre 780 0 N 0 0

PWD BUILDING 2026 19.6.2 20 mm nominal outer dia pipes 8 103 metre 824 0 N 0 0

PWD BUILDING 2026 19.6.3 25 mm nominal outer dia pipes 10 140 metre 1400 0 N 0 0

PWD BUILDING 2026 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 2 170 each 340 0 N 0 0

PWD BUILDING 2026 19.10.2 32 mm nominal bore 3 190 each 570 0 N 0 0

PWD BUILDING 2026 19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 2 72 each 144 0 N 0 0

PWD BUILDING 2026 19.11.3 25 mm nominal bore 3 99 each 297 0 N 0 0

PWD BUILDING 2026 19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 5 157 each 785 0 N 0 0

PWD BUILDING 2026 19.13.2 Bib cock (350 grams) 6 201 each 1206 0 N 0 0

PWD BUILDING 2026 19.13.3 Stop cock (350 grams) 5 201 each 1005 0 N 0 0

PWD BUILDING 2026 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 2 325 each 650 0 N 0 0

PWD BUILDING 2026 19.14.2 Long nose bib cock (500 grams) 5 387 each 1935 0 N 0 0

PWD BUILDING 2026 19.14.3 Long body bib cock (500 grams) 6 362 each 2172 0 N 0 0

PWD BUILDING 2026 19.14.4 Piller Cock (400 grams) 8 338 each 2704 0 N 0 0

PWD BUILDING 2026 19.14.5 Two way bib cock (800 grams) 6 602 each 3612 0 N 0 0

PWD BUILDING 2026 19.14.6 Stop cock (concealed) (600 grams) 2 420 each 840 0 N 0 0

PWD BUILDING 2026 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 2 325 each 650 0 N 0 0

PWD BUILDING 2026 19.14.8 Basin mixer pillar tap with spout (1000 grams) 5 1061 each 5305 0 N 0 0

PWD BUILDING 2026 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 4 1061 each 4244 0 N 0 0

PWD BUILDING 2026 19.14.10 Wall mixer with elegant knob (1400 grams) 4 1519 each 6076 0 N 0 0

PWD BUILDING 2026 19.14.11 Hand shower set with flexible extension pipe 5 667 each 3335 0 N 0 0

PWD BUILDING 2026 19.14.12 Bottle trap set with extension pipes 4 402 each 1608 0 N 0 0

PWD BUILDING 2026 19.14.13 Toilet paper holder 4 211 each 844 0 N 0 0

PWD BUILDING 2026 19.14.14 Soap dish plate 4 139 each 556 0 N 0 0

PWD BUILDING 2026 19.14.15 Shower rose (revolving type) (150mm) 4 229 each 916 0 N 0 0

PWD BUILDING 2026 19.14.16 Towel rail (600mm long x 20mm dia) 4 287 each 1148 0 N 0 0

PWD BUILDING 2026 19.14.17 Towel ring (150 mm dia) 6 216 each 1296 0 N 0 0

PWD BUILDING 2026 19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 5 1499 each 7495 0 N 0 0

PWD BUILDING 2026 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5 658 set 3290 0 N 0 0

PWD BUILDING 2026 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 23 490 set 11270 0 N 0 0

PWD BUILDING 2026 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 10 43 each 430 0 N 0 0

PWD BUILDING 2026 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 10 371 each 3710 0 N 0 0

PWD BUILDING 2026 19.16.2 32 mm nominal bore 15 434 each 6510 0 N 0 0

PWD BUILDING 2026 19.40.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre : 80 mm dia C.I. pipe 18 111 metre 1998 0 N 0 0

PWD BUILDING 2026 19.40.2 100 mm dia C.I. pipe 10 115 metre 1150 0 N 0 0

PWD BUILDING 2026 19.40.4 150 mm dia C.I. pipe 10 121 metre 1210 0 N 0 0

PWD BUILDING 2026 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 10 138 metre 1380 0 N 0 0

GOVT. OF CHHATTISGARH P.W.D. (B/R) DIVISION KONDAGAON

DETAILED ESTIMATE FOR ANNUAL REPAIR WORK OF RESIDENTIAL & NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION KESHKAL

FOR TECHNICAL SANCTION ESTIMATED

fooj.k ,oa ekU;rk,a

1 dk;Z dk uke % izkbejh Ldwy Hkou egkRek xka/kh okMZ esa ckm.MªhokWy ,oa xsV dk fuekZ.k dk;ZA

2 izkDdyu dh jkf'k % #0 6-21 yk[kA

3 izkf/kdkj % dysDVj ftyk dks.MkxkaoA

4 vko';drka, % orZeku esa izkbejh Ldwy Hkou egkRek xka/kh okMZ esa Ldwy dk lapkyu fd;k tkrk gSA ;krk;kr ds ncko dks ns[krs gq;s ,oa Nk=&Nk=kvksa dh lqj{kk dks ns[krs gq;s ckm.MªhokWy fuekZ.k dk;Z djk;s tkus dh vfr vko';drk gSA rnkuqlkj iz'kkldh; Lohd`fr gsrq izkDdyu rS;kj fd;k x;k gSA

5 izko/kku % mijksDr izkDdyu esa fuEukuqlkj izko/kku fd;k x;k gSA

1 vkj0lh0lh0 dkWye esa 0-20×0-30×2-60 eh0 lkbZt esa ,oa ckm.MªhokWy] vkj0lh0lh0 dkWye esa 1-50×1-50×1-50 eh0 lkbZt es uhao [kqnkbZ dj 15 ls0eh0 eksVkbZ esa csal dkWØhV djus dk izko/kkuA

2 bZV tqM+kbZ lhesaV elkyk 1%6 ls djus dk izko/kkuA

3 IykLVj &Iysu ljQs'k esa 12 ,e-,e- ,oa Rough Surface esa 15 MM eksVkbZ esa lhesaV IykLVj 1%6 ds elkyk ls IykLVj djus dk izko/kku A

4 jaxkbZ iksrkbZz dk izko/kku fd;k x;k gSA

5 xsV dk izko/kku A

6 nj ,oa ekU;rk,a % izeq[k vfHk;ark yksd fuekZ.k foHkkx N0x0 'kklu jk;iqj }kjk Hkou dk;Z gsrq fnukad 20-04-2026 lss tkjh nj vuqlwph ds vk/kkj ij izkDdyu rS;kj fd;k x;k gSA ,oa blh ds vuq#Ik gh dk;Z laikfnr djk;k tkosxkA

DETAILED ESTIMATE FOR SPECIAL REPAIR WORK OF NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION NO.01 KONAGAON

Part-I Dismantling

S.N S.O.R. ITEM No. PARTICULARS QTY UNIT RATE AMOUNT

1 16 16.36 0 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 233.53 sqm 22.5

2 16 16.26 0 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 14 each 100

3 16 16.27 0 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 each 66.5

4 16 16.28 0 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 19 each 46.5

5 16 16.29 0 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead. 6 kg 0.7

6 16 16.15 0 Dismantling thatch roofing including mats, bamboo, jaffri etc. complete including stacking of serviceable materials & disposal of unserviceable materials within 50 m lead. 28.259999999999998 sqm 11

1 12 12.76 12.76.1 Providing and laying Glazed Vitrified floor tiles (GVT+PGVT) with digital print of random design with water absorption less then 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below(+/- 10 mm) land on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete- 150.79 sqm 964

2 8 8.1 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.2675600000000001 cum 55099

3 8 8.12 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (PartI), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 7.98 sqm 1810 post mattrics boys hostel

4 8 8.99 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm 42 each 70

5 8 8.1 8.100.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 34 each 48

6 14 14.62 0 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 953.48 Sqm 61

7 12 12.36 12.36.1 12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. 12.36.1 Light shade using white cement 154.39000000000001 sqm 705

8 17 17.1 17.1.2 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness more than 15mm and upto 20mm 542.64 sqm 148

9 17 14.85 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Two coats up to final finish applied @ 0.750Kg/ 10Sqm 756.3699999999998 Sqm 38

10 17 17.7 17.7.3 Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required: White Orissa pattern W.C. pan of size 580x440 mm 6 each 1888

11 17 17.8 0 17.8 Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required : 17.8.1 White pedestal type each 5 each 1295

12 4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 24.358499999999996 cum 3164

13 8 8.102 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 48 each 31

14 8 8.103 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 74 each 46

15 14 14.71 0 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 72.763 Sqm 126

16 7 7.4 7.4.1 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 4.284 cum 3066

17 7 7.6 0 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 4.284 cum

18 11 11.3 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 46.599999999999994 sqm 100

19 1 1.1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 0.864 cum 185

20 3 3.1 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 0.864 cum 2524

21 9 9.3 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 363.906 kg 75

22 7 7.11 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level. Cement Mortar 1:4 (1 cement : 4 coarse sand) 3.8000000000000003 sqm 359

23 18 18.6 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type 8 each 992

24 18 18.8 18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete. White 7 each 1121

18 18.9 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black 8 each 521

18 18.9 18.9.2 Coloured 7 each 594

25 18 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5 each 1202

26 18 18.18 18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 6 each 787

27 18 18.55 18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 7 each 51

28 18 18.76 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 10 metre 153

18 18.76 18.76.2 110 mm dia pipe. 10 metre 224

29 19 19.4 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 15 metre 97

19 19.4 19.4.2 20 mm nominal outer dia .Pipes. 10 metre 134

19 19.4 19.4.3 25 mm nominal outer dia .Pipes. 8 metre 176

30 19 19.5 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 5 metre 118

19 19.5 19.5.2 20 mm nominal outer dia .Pipes. 5 metre 148

19 19.5 19.5.3 25 mm nominal outer dia .Pipes. 9 metre 189

31 19 19.6 19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes 10 metre 81

19 19.6 19.6.2 20 mm nominal outer dia pipes 8 metre 107

19 19.6 19.6.3 25 mm nominal outer dia pipes 10 metre 146

32 19 19.1 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 2 each 177

19 19.1 19.10.2 32 mm nominal bore 3 each 198

33 19 19.11 19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 2 each 75

19 19.11 19.11.3 25 mm nominal bore 3 each 104

34 19 19.13 19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 5 each 164

19 19.13 19.13.2 Bib cock (350 grams) 6 each 210

19 19.13 19.13.3 Stop cock (350 grams) 5 each 210

35 19 19.14 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 2 each 338

19 19.14 19.14.2 Long nose bib cock (500 grams) 5 each 403

19 19.14 19.14.3 Long body bib cock (500 grams) 6 each 377

19 19.14 19.14.4 Piller Cock (400 grams) 8 each 352

19 19.14 19.14.5 Two way bib cock (800 grams) 6 each 627

19 19.14 19.14.6 Stop cock (concealed) (600 grams) 2 each 437

19 19.14 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 2 each 338

19 19.14 19.14.8 Basin mixer pillar tap with spout (1000 grams) 5 each 1105

19 19.14 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 4 each 1105

19 19.14 19.14.10 Wall mixer with elegant knob (1400 grams) 4 each 1582

19 19.14 19.14.11 Hand shower set with flexible extension pipe 5 each 667

19 19.14 19.14.12 Bottle trap set with extension pipes 4 each 419

19 19.14 19.14.13 Toilet paper holder 4 each 220

19 19.14 19.14.14 Soap dish plate 4 each 144

19 19.14 19.14.15 Shower rose (revolving type) (150mm) 4 each 238

19 19.14 19.14.16 Towel rail (600mm long x 20mm dia) 4 each 299

19 19.14 19.14.17 Towel ring (150 mm dia) 6 each 225

19 19.14 19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 5 each 1561

19 19.14 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5 set 685

19 19.14 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 23 set 511

36 19 19.15 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 10 each 45

37 19 19.16 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore . 10 each 386

19 19.16 19.16.2 32 mm nominal bore 15 each 451

38 19 19.4 19.40.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre : 80 mm dia C.I. pipe 18 metre 116

19 19.4 19.40.2 100 mm dia C.I. pipe 10 metre 119

19 19.4 19.40.4 150 mm dia C.I. pipe 10 metre 126

39 20 20.1 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 10 metre 143

NIT SCHEDULE FOR SPECIAL REPAIR WORK OF RESIDENTIAL AND NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION NO.01 KONAGAON

SOR of Building Work for P.W.D. w.e.f. Ammendment Up to date 01.01.2026 PAC Rs. :- 20.00 Lacs

S.NO. Chapter No. Item No. Sub Item No PARTICULER OF ITEM NON RESIDENTAIL RESIDENTAIL QUNTITY UNIT RATE AMOUNT

1 16 16.36 0 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 233.53 sqm 22.5 S.NO. Chapter No. Item No. Sub Item No PARTICULER OF ITEM QUNTITY UNIT RATE AMOUNT

2 16 16.17 0 Dismantling G.I. sheet roofing including ridges hips, valleys and gutters etc. and stacking the material with 50 m lead. sqm 425.665 sqm 33.5 1 2 3 4 5 6 7 8 9

3 16 16.26 0 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 14 14 each 100

4 16 16.27 0 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 3 3 each 66.5

5 16 16.28 0 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 19 19 each 46.5

6 16 16.29 0 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead. 6 6 kg 0.7

7 16 16.15 0 Dismantling thatch roofing including mats, bamboo, jaffri etc. complete including stacking of serviceable materials & disposal of unserviceable materials within 50 m lead. 28.259999999999998 28.26 sqm 11

8 10 10.11 0 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 540.00 395.08 sqm 540

9 10 10.5 10.5.1 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 1.00 mm thick sheet with zinc coating not less than 275gm/sqm 9 metre 506

10 10 10.5 10.5.3 0.63 mm thick sheet with zinc coating not less than 275gm/sqm 26.9 metre 378

11 10 10.1 0 Extra for providing and fixing wind ties of 40x6mm flat iron section. 214.79999999999998 metre 100

12 12 12.76 12.76.1 Providing and laying Glazed Vitrified floor tiles (GVT+PGVT) with digital print of random design with water absorption less then 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below(+/- 10 mm) land on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete- 150.79 sqm 964

13 8 8.1 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.2675600000000001 0.2676 cum 55099

14 8 8.12 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (PartI), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 7.98 7.98 sqm 1810 post mattrics boys hostel

16 8 8.99 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm 42 42 each 70

17 8 8.1 8.100.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 34 34 each 48

18 14 14.62 0 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 953.48 Sqm 61

19 12 12.3 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 279.8300000000001 sqm 224

20 12 12.36 12.36.1 12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. 12.36.1 Light shade using white cement 154.39000000000001 sqm 705

21 17 17.1 17.1.2 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness more than 15mm and upto 20mm 542.64 821.84 sqm 148

22 17 14.85 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Two coats up to final finish applied @ 0.750Kg/ 10Sqm 756.3699999999998 756.37 Sqm 38

23 17 17.7 17.7.3 Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required: White Orissa pattern W.C. pan of size 580x440 mm 6 3 each 1888

24 17 17.8 0 17.8 Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required : 17.8.1 White pedestal type each 5 each 1295

25 4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 24.358499999999996 24.36 cum 3164

26 8 8.102 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 48 48 each 31

27 8 8.103 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 74 74 each 46

28 14 14.71 0 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 72.763 72.76 Sqm 126

29 7 7.4 7.4.1 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 4.284 4.28 cum 3066

30 7 7.6 0 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 4.284 4.28 cum

31 11 11.3 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 46.599999999999994 46.6 sqm 100

32 1 1.1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 0.864 0.86 cum 185

33 3 3.1 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 0.864 0.86 cum 2524

34 9 9.3 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 363.906 363.91 kg 75

35 7 7.11 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level. Cement Mortar 1:4 (1 cement : 4 coarse sand) 3.8000000000000003 3.8 sqm 359

36 18 18.6 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type 8 each 992

37 18 18.8 18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete. White 7 each 1121

38 18 18.9 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black 8 each 521

39 18 18.9 18.9.2 Coloured 7 each 594

40 18 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5 each 1202

41 18 18.18 18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 6 each 787

42 18 18.55 18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 7 each 51

44 18 18.76 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 10 metre 153

46 19 19.4 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 15 metre 97

47 19 19.4 19.4.2 20 mm nominal outer dia .Pipes. 10 metre 134

48 19 19.4 19.4.3 25 mm nominal outer dia .Pipes. 8 metre 176

49 19 19.5 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 5 metre 118

50 19 19.5 19.5.2 20 mm nominal outer dia .Pipes. 5 metre 148

51 19 19.5 19.5.3 25 mm nominal outer dia .Pipes. 9 metre 189

52 19 19.6 19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes 10 metre 81

53 19 19.6 19.6.2 20 mm nominal outer dia pipes 8 metre 107

54 19 19.6 19.6.3 25 mm nominal outer dia pipes 10 metre 146

55 19 19.1 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 2 each 177

56 19 19.1 19.10.2 32 mm nominal bore 3 each 198

57 19 19.11 19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 2 each 75

58 19 19.11 19.11.3 25 mm nominal bore 3 each 104

59 19 19.13 19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 5 each 164

60 19 19.13 19.13.2 Bib cock (350 grams) 6 each 210

61 19 19.13 19.13.3 Stop cock (350 grams) 5 each 210

62 19 19.14 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 2 each 338

63 19 19.14 19.14.2 Long nose bib cock (500 grams) 5 each 403

64 19 19.14 19.14.3 Long body bib cock (500 grams) 6 each 377

65 19 19.14 19.14.4 Piller Cock (400 grams) 8 each 352

66 19 19.14 19.14.5 Two way bib cock (800 grams) 6 each 627

67 19 19.14 19.14.6 Stop cock (concealed) (600 grams) 2 each 437

68 19 19.14 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 2 each 338

69 19 19.14 19.14.8 Basin mixer pillar tap with spout (1000 grams) 5 each 1105

70 19 19.14 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 4 each 1105

71 19 19.14 19.14.10 Wall mixer with elegant knob (1400 grams) 4 each 1582

72 19 19.14 19.14.11 Hand shower set with flexible extension pipe 5 each 667

73 19 19.14 19.14.12 Bottle trap set with extension pipes 4 each 419

74 19 19.14 19.14.13 Toilet paper holder 4 each 220

75 19 19.14 19.14.14 Soap dish plate 4 each 144

76 19 19.14 19.14.15 Shower rose (revolving type) (150mm) 4 each 238

77 19 19.14 19.14.16 Towel rail (600mm long x 20mm dia) 4 each 299

78 19 19.14 19.14.17 Towel ring (150 mm dia) 6 each 225

79 19 19.14 19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 5 each 1561

80 19 19.14 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5 set 685

81 19 19.14 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 23 set 511

82 19 19.15 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 10 each 45

83 19 19.16 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore . 10 each 386

84 19 19.16 19.16.2 32 mm nominal bore 15 each 451

85 19 19.4 19.40.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre : 80 mm dia C.I. pipe 18 metre 116

86 19 19.4 19.40.2 100 mm dia C.I. pipe 10 metre 119

87 19 19.4 19.40.4 150 mm dia C.I. pipe 10 metre 126

88 20 20.1 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 10 metre 143