PROVN OF CERTAIN WORKS SERVICES FOR KU BAND SATCOM AT AF STN RAJOKRI AND SPECIAL REPAIR TO SNCOs MESS AT ISSAPUR UNDER GE AF GURGAON

Amount

Demolition of Mud in roofs, any thickness including plastering and leeping, (whether full thickness removed etc including roof tiles complete all as specified and as directed.

M&L for 50 mm thick PCC (1:2:4) type B-0 (Using 12.50mm graded stone aggregate) as in roof padding complete all as specified & as directed.

M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified and as directed. Notes : WPC shall be measured and paid seperately.

M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqm followed by a tack coat @ 1.2 kg per sqm using 85/25 grade industrial hot blow bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm as per manufacturer's instructions complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for providing plain cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in coping or roof kerbs on roof chamfered on edge including trowelling slightly complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and as directed.

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments complete all as specified and as directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M&L for Rough Cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is in plastic state the Rough cast mixture consisting of crushed stone or fine gravel mixed of size 6 mm with coarse sand and cement in the ratio1:1:1 shall be applied and finish even complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified.

Supply only intergral water proofing compound ISI Marked complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

M&L for Complete removal of existing surfaces of wall and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of ceiling and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

M&L for Complete removal of existing surfaces of ceiling and applying two coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for Complete removal of existing surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.

M&L for providing 1-3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform complete all as specified and as directed.

M&L for providing 1-3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (20 mm graded crushed stone aggregate ) as in chajjas complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Use and Waste formwork to soffits of suspended slabs (flat) such as roof slabs, floor slabs,chajjas, landings and similar work,not exceeding 200mm thick (Horizontal or sloping) rough finished surface complete all as specified and as directed.

M&L for Use and Waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5 cm but n exc 10 cm wide rough finished surface complete all as specified and as directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F of 18 mm thick WPC celluka ply of one side Prelam/Rigidlam and other side balancing laminated colour to make kitchen cabinet shutter/ drawer front shutter/ cupboard shutter including edge beading complete as pr specifications complete all as specified and as directed.

S&F of 12 mm thick WPC celluka ply of plain white colour fixed with screws, solvent/adhesive to make wall mounted kitchen cabinet back and pull drawer sides/ cupboard sides complete as per specifications complete all as specified and as directed.

S&F of 6 mm thick WPC celluka ply of plain white colour fixed with screws, solvent/adhesive to make kitchen cabinet back covering and drawer base / cupboard back covering complete as per specifications complete all as specified and as directed.

S&F 75 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 100 mm size stainless steel handle and fixed complete all as specified and as directed.

S&F 100 mm size stainless steel tower bolt and fixed complete all as specified and as directed.

S&F 15 mm outer dia stainless steel rode 1mm thick, with bracket for ward robe including full threaded steel screws complete all as specified and as directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each complete all as specified and as directed.

All as per item No.37 here-in-before but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F Factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified complete all as specified and as directed.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and as directed.

S&F powder coated anodized aluminum frame for partition, doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium anodized handles suitable size 2 Nos in each door,100 mm long aluminum anodized hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified and as directed.

S&F powder coated Anodised aluminium window and ventilator shutters,without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and as directed.

S&F for 5.50 mm thick sheet glass ordinary quality and glazing each pane fixed with neoprene rubber gasket in aluminium frame work complete all as specified and as directed.

S&F sheet glass 4mm thick ordinary quality and glazing each fixed with neoprene rubber gasket in aluminium frame work complete all as specified and as directed.

S&F 9 mm thick prelaminated particle board exterior grade in bottom panel of Aluminium door including rubber gasket, aluminium glazing clips complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

S&F aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F 150 mm double action door spring hinges, brass, with phosphor bronze wire spring, bright polished complete all as specified and as directed.

S&F Mortice lock, vertical type of brass 100 mm 4 Levers with duplicate keys complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall etc complete all as specified and as directed.

M&L for 15 mm bore steel water tubing medium grade (ISI marked) galvanised with and including all tube fittings (ISI marked) concealed or fixed to wall, ceiling or laid in floors complete all as specified and as directed.

M&L for 20 mm bore steel water tubing medium grade (ISI marked) galvanised with and including all tube fittings (ISI marked) concealed or fixed to wall, ceiling or laid in floors complete all as specified and as directed.

S&F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints including bend, Tee, laid in trenches or in floors 50 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint fixed to wall complete all as specified and as directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and as directed.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and as directed.

S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and as directed.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and as directed.

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and as directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and as directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and as directed.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) but including chromium plated spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified and as directed.

S&F in repair 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed .

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and as directed.

S&F in repair PVC flush bend 32 mm bore with two Nos check nuts for connecting to low level flushing cistern top European type water closet or Indian type water closet including cement joint complete all as specified and as directed.

S&F in repair Health Faucet ABS body with 1 meter SS braided connection pipe. (Model : F8030108AB) of Make : Cera or equivalent out of makes spd in list of makes.

S&F Toilet paper holder of brass of chromium plated or stainless steel fixed to wall with s/s screws complete all as specified and as directed.

S&F Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and as directed.

S&F in repair 75mm dia CI floor /nahani trap with grating CP including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M& L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in sub base of floor tiles complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for bedding of tiles complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified and as directed.

M&L for joint free Non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for joint free Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 6-7mm/450x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and as directed.

M&L for Machine pressed precast concrete design interlocking paver block any shape and size confriming to IS 15658-2006 of 60mm thickness , M-35 grade with Grey Cement and no pigment complete all as specified and as directed.(Sand cushion will be measured and paid seprately).

M&L for sand cushioning including watering and consolidations etc complete all as specified and as directed.specified.

Demolition of cement concrete (un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 50 mm thick cement concrete (1:2:4) type B-2 with using 40 mm graded stone aggregates) as in plinth protection etc complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) as in foundation or sub base and mass concrete etc complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified and as directed.

M&L for half brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified and as directed.

Removing bldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and as directed.

S&F Welded steel wire fabric weight not exceeding 4 kg/sqm fixed/welded to steel member complete all as specified and as directed.

M&L for prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:4) on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for joint free coloured double charged vitrified tiles 9 to 10mm thick (Square/ rectangular) area of each tile n.exc 0.36 Sqm, in floors/shirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F rolled mild steel plate (plain/cheqqured) chennel, square cut or notched, forming holes, without any attachement confirming to Fe 410-S complete all as specified and as directed.

M&L for microperforated metal tiled false ceiling of size 595x595mm, 1.5mm dia of holes in 22% area in digonal pitch, made out of 0.50mm thick GI sheet, galvanizing 90-100Gm, exposed surfaces of tiles coil coated with 25 micron or polyster powder coating of thickness 60 micron in colour off white/white, tee runners 15/24x38mm, 0.27-0.33mm thick, cross T of size 15/24x25-38mm, wall angle of size 24x24x0.27-0.33mm, grid suspended with GI slotted cleats of size 26/27x26/27x25x1.2-1.6mm fixed to ceiling with M6 anchor fastners 2.68/4mm GI wire, etc complete all as specified, as per manufacturer's instructions complete all as specified and as directed. Make: Armstrong or METACIL or any other make out of makes specified in list of makes.

Taking down carefully old copper/alluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fitting etc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as specified and as directed.

Taking down old unserviceable main switch, DB's/RCBOs/MCCB/Sheet Metal Enclosures including MCBs & wooden/GI/MS sheet board etc and removing materials from the site of work complete all as specified and as directed.

Taking down old unserviceable sub main wiring any size/core/type of copper/alluminium conductor. including making good the disturbed surfaces and removing materials from the site of work complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor1.5 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia including 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module and single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for :-

(a) One light point/bell point/one fan/exhanust fan controlled by one,one way switch.

(b) For one 5 pin, socket outlet 5/6 amp on independent board with other switches.

(c) For one 3 pin socket outlet 5/6 amp on same board.

(d) For one 6 pin socket outlet 16/6 amp on using stranded copper conductor 2.5 sqmm single core (nominal area ) PVC insulated and unsheathed including single core stranded copper conductor 2.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly on an independent board.

M&L for point wiring complete with stranded copper conductor 4 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia including 1.6mm thick concealed pressed steel terminal boxes with plate & framecover for required module and single core stranded copper conductor 2.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for one 6 pin socket outlet two in one 16/6 amps on an independent board.

M&L for switch modular type single pole one way 6 amps complete all as specified and as directed.

S&F Bell push modular type 5 Amp complete all as specified and as directed.

S&F switch socket 2 in 1, 6 Amp modular Type 5 pin multipurpose suitable for independent board complete all as specified and as directed.

S&F switch modular type single pole one way 16 amps complete all as specified and as directed.

S&F switch socket combination 2 in 1, 5 pin multipurpose 16 A , modular type complete all as specified and as directed.

Supply & fix submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 6.0 sqmm 1x 6.0 sqmm wire complete all as specified and as directed.

Supply & fix submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 4.0 sqmm 1x 4 sqmm wire complete all as specified and as directed.

S&F PVC/Wooden blocks as suitable to site condition for fixing tube light fitting on wall/ceiling complete all as specified and as directed.

S&F in replacement of tube light fitting 1X20 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS20WLED865SPCSSor equuivalent make of phillips,Surya,Bajaj.

S&F in replacement of tube light fitting 1X10 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS10WLED865SPCSSor equuivalent make of phillips,Surya,Bajaj.

S&F sheet metal enclosures for DB-4 way, SPN, 200 Amps Bus bar 240 Volts double door complete all as specified and as directed.

S&F sheet metal enclosures for DB-08 way, SPN, 200 Amps Bus bar 240 Volts double door complete all as specified and as directed.

Refixing sheet metal enclosure TPN takenout under item sr no 2 hereinbefore incl making good the disturbed surface to match with the existing surface complete all as specified and as directed.

S & F of Single pole and neutral enclosure with two pin and earth plug and socket complete with one single MCB 20 amps complete all as specified and as directed.

S&F MCB SP 240 volt, 5 to 32 Amps, C series, 10 KA complete all as specified and as directed.

S&F MCB SPN 240 volt, 5 to 32 Amps, C series, 10 KA complete all as specified and as directed.

S&F electronic type modular , 120 watt -2 modul fan regulator complete all as specified and as directed.

S&F ceiling rose , single phase /PVC /Polycarboante isolated body complete all as specified and as directed.

Re fixing of Ceiling rose complete all as specified and as directed.

S&F Bell Multi Music type complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less thatn 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers GI earth wire with protected by 15mm dia light grade GI pipe and other end connected to earth testing point or main controlling switch as directed incl funnel with watering pipe 20mm bore light grade GI pipe, wire mess , charcol and common salt, concrete earth pit in PCC (1:3:6) type C1 cast iron frame cover , including necessary excavation, earth work in soft/loose soil and disposal of soil to a distance not exc 50mtr and necessary testing complete all as shown in electrical plate No 3 of MES schedule Part I and testing complete all as specified and as directed.

S&F Higly efficient LED Bullbs of 15 W complete all as specified and as directed.

Taking down exhaust fan and refixing after repair by Dismentling and taking out old burnt damaged coils of exhaust fan 450 mm sweep including scraping out old paint & cleaning all dust, making smooth surface with filler materials/ sand paper & painting with 1st grade quality synthetic enamel paint by spray & proper numbering including replacing of Twin flexible wire with new from ceiling rose to connector of fan complete all as specified and as directed.

Rewinding of exhaust fan 450mm sweep with the same guage as per existing by new supper enameled copper wire including insulating material, heating, varnishing, reassembling, testing complete to the entire satisfaction of Engr-in-charge including replacement of the following parts : bearings , blades, louvers complete all as specified and as directed.

Taking down ceiling fan from ceiling and refixing after repair by Dismentling and taking out old burnt damaged coils of ceiling fan 1200/1400 mm sweep including scraping out old paint & cleaning all dust, making smooth surface with filler materials/ sand paper & painting with 1st grade quality synthetic enamel paint by spray & proper numbering including replacing of Twin flexible wire with new from ceiling rose to connector of fan complete all as specified and as directed.

Rewinding of ceiling fan 1200/1400 mm sweep with the same guage as per existing by new supper enameled copper wire including insulating material, heating, varnishing, reassembling, testing complete all as specified and as directed.

S&F of following parts in replacement of unserviceable parts complete all as specified and as directed.:-

i) Ball bearings ISI mark

ii) Condenser 2.50 mfd

iii) Down rod with Split pin

iv) Fan blades

S &F for LED light fittings 1X15 watts bulkhead luminaires including LED light driver holderconnectingup with 3 core flexible copper conductor cable ofsuitable size complete all as specified and as directed.

S& F lamp holder ,PVC/POLYCARBONATE Type with back plate suitable for batten fittings complete all as specified and as directed.

Supply, Installation and testing of high wall split units indoor/outdoor complete including fixing bracket to wall for outdoor unit with cordless remote control unit and with in-built air ionizer and plasma filter for better indoor air quality with 5 star rating of capacity of 02 TR complete with suitable inverter technology with voltage stabilizer input voltage 170 to 250 V & output voltage 230 V cpacity 4 KVA complete all as specified and as directed by Engr-in-Charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and as directed.

S&F in replaceent of MCB DB sheet metal enclosure Single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and as directed.

S&F in replaceent of MCB DB sheet metal enclosure load line vertical triple pole and neutral 415V with 250 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and as directed.

S&F MCCB 100Amps,415V, 4 pole, 36 KA complete all as specified and as directed.

S&F MCB SPN (40-63 Amps) 230V 'B' curb type complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and and not exceeding 1.5 m depth in loose/soft soil and getting out soil all as specified and as directed.

Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removal of surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete as specified and as directed.

Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid .

Supply and laying un-reinforced precast concrete LV cable cover class Type I with 250 x 150 x 40 mm, as specified and as directed.

Supply and fix GI pipe light grade of size 80mm for cable protection in trenches/ at PCC poles for loopin/ loopout of cable and cable entry at bldg/block/road crossing end,all as per specified and as directed.

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5core x 70 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and as directed.

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5core x35 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and as directed.

Supply, installing, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) LT Panel board ,cubical compartmentalized , out door type double door , plate form mounted, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars four pole installed on porcelain/SMC insulator. The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and 45x45x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front and rear opening type, with apron for cable entry closing locking arrangement including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size ( but not less than 2.5 Sqmm) and comprising of the following :- (a) Incoming :- (i) MCCB 4 pole , 200 Amps,50 Hz,415 Volts, 36 KA, - 01 Nos

M & L for Earthing complete with Copper earth plate electrode 60cmx60cmx3.00mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using Copper strip 20×3.15mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 40 mm dia GI protection pipe light grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified.

M/S ujjwal associates

akhil enterprises