Supply and installation of led lights

Amount

Supply/installation of the following type of outdoor decorative LED Flood light and Street lights luminaries with excellent management and IP 66/65 Protection complete with all accessories connection testing and commissioning as required similar to cat No GLOFLO/100 watt and cat No. INDUS-i/110 watt Make (Bajaj/Legrand /Surya /Havells/Hager/ C&S/ HPL/wipro/lokozo/Crompton) 95 to 120 watt 230 volts.

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required (Wire Make ISI Marked Havells/Bonton/ Anchor/Grandley/L&T/HPL/Shalimar/KEI/Polycab) 2 x 1.5 sq mm

Providing and fixing following rating and breaking capacity MCCB with Thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Siemens/Schreinder/ L&T/Hager/Havells/IA/HPL/ Standard/Crompton) 100 AMP 16K TP

S/F of MS marshal box of (100 x 100 x 100)mm size suitable for housing the MCB and connection.

Supply, testing and commissioning of PVC insulated PVC sheathed Aluminium conductor 1100 volts graded PVC AA Armoured/ unarmoured XLPE Cable including end termination, crimping, cost of thimbles, nuts bolts, glands, connection, testing and commissioning complete job. (Make Havells /CCI/ Grandley /Finlox /Plaza / General/Polycab/Gloster) 2 core 16 sq mm armoured cable

-----------do------------ 3.5 core 25 Sqmm

Earthing with G.I earth plate (600 x 600 x 6 mm thick) including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing along with existing surface/recessed conduit as required.

Supply/Errection of sawaged type steel tubular pole of following height duly painted with two coats of red oxide and two coats of silver paint made of Mild Steel conforming to IS 2713 part II of 1980 designated as 410 SP15 MPa planted in 1/6 th of the pole height deep pit to be dug for the purpose, welded with (300x300x6) mm GI base plate at bottom, filling back the pit with cement concrete including the cost of Cement concrete. The pole shall be provided with suitable clamps for fixing the cross arms/ M.S. channels. The planting depth of the pole shall be 1/6th of pole height provided with single or double arm as per requirement at site including making the cement concrete bottoming 1”-6” above the GL of round/rectangular shape, form work plastering if required and curing etc. 8 mtr. height

-----------------do------------------ 4 mtr. Height

Supplying and fixing 5 amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB/marshalling box complete with connections, testing and commissioning etc. as required. (Make Havells /Legrand /Anchor /C&S/L&T/ Siemen/IA/HPL/Standard/Wipro) Single pole

P/F of 40 Amp. Ratings 240 volts SP&N MCB in the existing MCB DB complete with connections, testing and commissioning (Make: Havells/Anchor/legrand/C&S)

Design, manufacture, testing at works & supply, installation, testing & commissioning of outdoor cubicle panel floor mounted (on base frame) totally enclosed and extensible type . The general construction shall comprise to IS 8623-93. The design shall include all provisions for safety of operating and maintenance personal. IP54, should be compartmentalized type having space and arrangements for I/C. cable/bus ducting/incoming switch gears, bus couplers, insulated and properly supported compartmentalized switch gear, outgoing compartmentalized switch gear, bus bar support and terminations, interconnection between bus bars & switch gear with auxiliary bus bars/insulated conductors/strips etc. The panel shall be fabricated out of CRCA not less than 2.00 mm thick for the load bearing members and 1.6mm for doors of L.T Panels. The frame work may be Agle Iron/Channel/Bolted type construction should be arrangement for I/C/O/G. Cable termination with 2 Each. 20x5mm cu. Strip fixed all around the panel connected to 2 Each. earth bars cu-strips connected to incoming earth conductor. (Make Electric Field/ Hindustan/Bharti Engineers/ Gupta & Friends/ Semon/ Jai maa/U.S.Electrical works/JK Power Control) MAIN OUTDOOR FEEDER PANEL a. INCOMING Space for 1 No. 100 Amp 4-pole MCCB of 25 KA. INDICATING PANEL The indicating panel of the incomer shall be provided with the following: i. Ammeter of required range with ASS, CT's. ii.Voltmeter of required range with VSS. BUS BAR Space for 1 No. 200Amp TPN Al. Bus bar of equal cross section for power load and light load. OUTGOING Provision for 4 to 6 no 40 Amp SPN MCB for providing power to flood lights Dimension = (2’ x 1’6” x 1’)