Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹43.5 L+₹10.8 L (33.0%)Rejected-Finance B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L2 | Rejected-Finance HIGHER RATE |
Tender Value
Refer Docs
EMD Value
₹96,980
Closing Date
30 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
SPL REPAIR TO EIA OFFICES IN MAIN BLDG AT KASHMIR HOUSE UNDER GE NEW DELHI
2024_MES_677929_1
NIT No GE/ND-84/2024-25
Open Tender
Civil Works
Item Rate
270 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹96,980
Yes
7 Dec 2024
4 Oct 2024
1 Nov 2024
4 Oct 2024
30 Oct 2024
16 Oct 2024
Amount
B&R PORTION: M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 with old size bricks complete all as specified and directed.
Dismantling wall, ceiling boards and pre fabricatio boards incl frame of any description as in panelling ceiling, partition, cub boards etc incl cover fillets in any surfaces complete all as specified and directed.
S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters incl moulding at columns, windows and doors jambs complete all as specified and directed. Note: (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.
"M&L white Laminated Gypsum board fixing on GI frame work of grid size 605x605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners withand including ceiling section (not exc 1.2m length) of 0.55mm tickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connectiong clips across the intermediate channel at 457mm centre tocentre Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including necessary covings complete all as specified"
Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises complete all as specified and directed.
M&L for double charge vitrified tiles of area exceeding 0.42 sqm but n exc 1.00 sqm thickness 9-10 mm of premium quality in floors etc. set or placed with 3mm thick spacers and grouting by epoxy over and including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surfaces 450 X 300 X 7mm coloured tiles set and jointed in neat cement slurry and pointed in white or coloured to match over and incl 15 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for non skid ceremic coloured tiles 7 to 8 mm thick (square/ rectangle) area of each tiles exc 0.11 but n.exc 0.18sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 15mm thick screed in CM 1:6 complete all as specified and directed.
Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubing down with water, etc.in cement or cement lime plaster, any description complete all as specified and directed.
M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed.
M&L for 5mm thick Ready mix plaster (Make : Ultratech) on concrete surfaces on ceiling finished even and smooth complete all as specified and directed by Engr-in-Charge
M&L for 15 mm thick polymer modified Mortar (PMM) on concrete surfaces of wall/ceiling without using extra cement including a bonding coat with two part solvent free bonding agent composed of liquid epoxy resin & hardener complete all as specified and directed. Make : SIKA/ FOSROC/ STP with same nature of chemical treatment as prescribed above. Note :- (a) The rate inclusive for scaffolding up to 10 metre height. (b) The work shall be done throug manufacturers authorised applicators only under the close supervision of their technical staff
Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.
S&F Steel work in tubular trusses confirming to Fe 410-W Gde 250 A including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F welded steel wire fabric fixed complete to steel member n.exc 4 Kg per Sqm including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down chowkhats or frame without taking off shutters n. exc 1.50 sqm complete all as specified and directed.
Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed.
S&F powder coated aluminium window incl frame using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter , 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, butt hinges SS 100 mm 04 Nos etc complete all as specified and directed by Engr-in-Charge
S&F powder coated aluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size of glass (Make of glass: MODI/FLOAT/ATUL) complete all as specified and directed.
S&F aluminium ornamantal grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and directed.
S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed.
Dismantling boarding any descriptin, fixed in any position with screws complete all as specified and directed.
S&F powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/5.50 mm thick frosted glass including aluminium beading for fixing board (Make of glass: MODI/ FLOAT/ ATUL) complete all as specified and directed.
S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc and the edges shall be covered with PVC banding tape complete all as specified and directed.
S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings complete all as specified and directed.
S&F GI tubing medium grade with all fittings and fixed compete to walls and ceilings or laid in floors 15 mm bore complete all as specified and directed.
M&L for cluster of five side by side workstation of size 1200x600x1200mm complete all as specified and directed includes the following :- (a) 60mm panel with double raceway (1200wx1200h) -05 Nos, 60mm panel with double race way (600wx1200h) -06 Nos, 25mm thick WORTOP in PLPB (1200X600) MM-05 Nos, 4 Nos of drawer pedestal in metal with 50-60 micron powder coated 400x450x680mm -05 Nos, CPU trolley-05 Nos and key board tray-05 Nos.
M&L for single workstation of size 1200x600x1200mm complete all as specified and directed includes the following :- (a) 60mm panel with double raceway (1200wx1200h) -01 Nos, 60mm panel with double race way (600wx1200h) -02 Nos, 25mm thick WORTOP in PLPB (1200X600) MM-01 Nos, 3 Nos of drawer pedestal in metal with 50-60 micron powder coated 400x450x680mm -01 Nos, CPU trolley-01 Nos and key board tray-01 Nos.
S&F Overhead storage of size 600x500x900mm of having swing openable shutters shall be made up of metal with 50-60micron powder coated complete all as specified and directed.
Removal of existing roof treatment incl under layers of cement screed any thickness incl tiles and taking down debries from roof to ground by machanical means to avoid any damange to structure and sorrounding and dispose off the debries out of MoD land at a distance of exc 5 km and n.exc 10 km where directed complete all as specified and directed.
(a) M&L clean the surface, remove dust dirt, loose particles and unsound substrate and providing 20 mm thick cement screed (1:4) mixed with Dr Fixit or equivalent tonic liquid 200 gram/Bag over Dr Fixit or equivalent as approved by GE. (b) Applying primer coat with solvent based Bitumen primer @ 0.5 ltr/sqm (c ) Dr Fixit or equivalent as approved by GE torch shield water proofing 3mm thick membrane use gas burner to heat substrate, press firmly from lower end to upper and with 100 mm overlap (d) Heat both over lap with round tipped trowel to seal over lap . Excess compound smoothened, pressed into seam using hot trowel (e) Seal edges well into grooves & protect with a poly sulphide sealant. (f) M&L hydraulically pressed burnt clay tiles plain size 300X300X19 mm laid over and including 15mm thick screed in CM 1:4 with WPC & pointed in CM 1:3 mixed with crude oil complete all as specified and directed. Note: (a) WPC as per manufacturer's instruction shall be deemed to be included in unit rate quoted. (b) Uploading of material shall be carried out by mechanical means, use of staircase is strically probihited (c) Water proofing treatment shall be carried out through approved manufacturer's applicator
E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.
M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 6 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.
All as per item No 35.00 above but one light point controlled by two way 5 Amp switches complete all as specified and directed.
All as per item No 35.00 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.
All as per item No 35.00 above but one three pin 5 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.
All as per item No 35.00 above but one three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board complete all as specified and directed.
All as per item No 35.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.
S&F in replacement of modular Switch 6 amps, one module, 230 vots, single pole, one way (ISI marked) complete all as specified and directed.
S&F in replacement of modular Switch 6 amps, one module, 230 vots, single pole, two way (ISI marked) complete all as specified and directed.
S&F in repair modular bell push 6 amps complete all as specified and directed.
S&F in repair 16 Amp rating modular switch one way one module complete all as specified and directed.
S&F in replacement modular socket out let 230 volts grade (as catered in point wiring above) 6 Amp, 2/3 pin combined 2 module complete all as specified and directed.
S&F in repair modular socket out let 230 volts grade (as catered in point wiring above) 16 Amp - 2/3 pin combined 2 module complete all as specified and directed.
S&F in repair electric bell AC 230 Volt complete all as specified and directed.
S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.
S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 6 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.
S&F in repair factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.
Supply and fixing in repair MCB, 240V 10KA, B & C curve and current carrying capacity in the MCB DB, MCB SP 5 to 32 Amps of B & C curve as per site requirement complete all as specified and directed.
Supply and fixing in repair MCB, 240V 10KA, and current carrying capacity in the MCB DB MCB SP 40 Amps of C Curve complete all as specified and directed.
Supply and fixing in repair MCB, 240V 10KA, and current carrying capacity in the MCB DB MCB SPN 32 Amps of C curve complete all as specified and directed.
Supply and fixing in repair Rigid non-metallic PVC conduit size 25mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.
Supply and fixing in repair Rigid non-metallic PVC conduit size 40mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.
Supply and fixing in repair modular AC box with MCB Protected Socket PVC Plastic Base Model (White) single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified and directed.
Taking down carefully LAN/telephone cables from existing conduit/casing capping and refixing the same including accessories such as couplers, lock nuts, saddles, pipe hooks etc and making good the disturbed surface & wall/ floor complete all as specified and directed.
Supply and fixing in repair LED Tube Light of 20 Watt 230Volt (size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in repair aesthetically designed celing LED light (2x2) of 36 W fixture with spun aluminium base, stainless steel arm, spun aluminium holder cap, CRCA sheet back plate, frosted glass diffuser complete all as specified and directed.
Supply and fixing in replacment BLDC ceiling fan 1200 mm sweep,300 RPM, 230 volts with remote having full copper motor & ribbed alluminium blades for higher air delivery,powder coating provides longer life complete with accessories including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified and directed. Note: Old unsv item shall be deposited to MES store yard in safe custody.
Supply and fixing in replacement of wall fan 400mm (16 inch) 60 watt Oscilating wall fan (KD white) wall mounted speed 1350 RPm completet allas specified and directed by Engineer in Charge Make :bajaj,crompton,havellsand including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement morter complete all as specified and directed by Engineer in charge. Note: Old unsv item shall be deposited to MES store yard in safe custody.
S&F in repair factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link including MCCB TPN 63 Amp, 25KA (with adjustable setting) as incomer complete all as specified and directed.
Supply, installation, testing and commissioning of Split Air-conditioner Hi wall Model of cooling capacity 1.5 TR consisting air cooled copper condenser coil, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, suitable compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with 5 star BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete in all respect complete all as specified and directed. Make: Bluestar/ Hitachi/ Daikin
M & L for taking down of existing LT panel and refixing the the same at its original position along with complete accessories making good surface old disturbed area at wall complete all as specified and directed.
BEHAL TRADERS (BID ID -3153576)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .