Improvement of Rural Road for a length of 6.630 Km from Kalapathar Beach to Kalapathar village Ward No. I and II at Swaraj Dweep under CD-I, APWD, Port Blair

Amount

Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy .

For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications:

On bituminous surface @ 0.50 Kg / sqm

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.

50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Hot Mix Plant of 40-60 TPH capacity.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.

40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and cement filler @ 3% (percentage by weight of aggregate) and waste plastic addditive @ 8% (percentage by weight of bitumen) prepared in Hot Mix Plant of 40-60 TPH capacity.

Total of A(Sum of total amount)

Provision for 05 years Routine Maintenance after completion of work [Note:-Item No.5 need to be freezed as the maintenance is included as per the provision mentioned in page No. 44 of this NIT. Accordingly the rate to be quotated by the contractor is from Item No. 01 to 04 (Including Maintenance Cost) ]

For 1st Year

For 2nd Year

For 3rdYear

For 4th Year

For 5th Year

Total of B(Sum of total maintanance amount from sheet1)

Total A+B

CSE CONSTRUCTION (INDIA) PRIVATE LIMITED