Remaining Work of RJ-11-04/SDRF/RTGH/ 2025-26 Sub Dn II Ratangarh Section II (Pkg No 4/2)

NH 11 to Bhartion ki Dhani

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of non thorny jungle

Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002 Mechanical Means

Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800

Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Supply of readymade cold bituminous mixture for pothole patching in potholes in accordance with IRC:116-2014 specifications with IRC: 116-2014 spccifications with 5.6% C800 Cut back Bitumen and suitable anti stripping agent with all lead and lift in 50 kg plastic lined sturdy bags complete in all respect as per direction of engincer-in- charge including all transportation, stacking & taxes etc

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404

NH 11 to Biramsar Pahari

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of non thorny jungle

Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002 Mechanical Means

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800

Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404

NH - 11 to Bhartiyon ki Dhani Ratangarh

Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002 Mechanical Means

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800

Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Supply of readymade cold bituminous mixture for pothole patching in potholes in accordance with IRC:116-2014 specifications with IRC: 116-2014 spccifications with 5.6% C800 Cut back Bitumen and suitable anti stripping agent with all lead and lift in 50 kg plastic lined sturdy bags complete in all respect as per direction of engincer-in- charge including all transportation, stacking & taxes etc

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404

CC Road Ladhasar Bus Stand to Ladhasar

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

CC Ghumanda to Bachhrara Rishikul to Ramsisar (Up to The. Border)

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Gram Panchyat Daudsar - Todaram Bangrawa house to Balaji Dhora Gram Daudsar

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Gram Panchyat Tidiyasar - Pitram Nain House to Ghumanda Road

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Gram Panchyat Biramsar - NH 11 to Mali stand to Khumahron ka Brhamano ka Mohalla Daroga Mohalla & Thakur ji Mandir Hote hue next Stand NH 11 Village Biramsar

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Approach Road Gorisar Guwad to Daudsar Road Gorisar

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Birbal Ram house to Ruka Ram Sabrwal house Ratansara

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Gram Panchyat Jandwa Netram Khumhar house to Manana Johar Ramgarh

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Removal of blown sand including taking out and disposal of excavated material with lead up to 50 mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Please Enable Macros to View BoQ information