Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in Order | |
| 2 | L2₹21.5 L+₹1.7 L (8.41%)Rejected-AOC DHOBI MOHALLA BATMALOO SRINAGAR 190010 J K | SRINAGAR | SRINAGAR | J K | 190010 | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹21.8 L+₹1.9 L (9.64%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹22.3 L+₹2.4 L (12.3%)Rejected-AOC AZAD COLONY B 90 FEET ROAD SOURA SRINAGAR J K 190011 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190011 | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹23.2 L+₹3.3 L (16.8%)Rejected-AOC QURESHI BUILDING BUDSHAH CHOWK SRINAGAR 190001 KASHMIR J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹53,800
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
WINTER PREPARATION AND ALLIED MAINT ACTIVITIES FOR ELECTRIC SUPPLY SYSTEM IN THE AOR OF GE 874 EWS
2022_MES_564092_1
GE 874/EWS-57/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹53,800
Yes
19 Jan 2023
19 Nov 2022
19 Dec 2022
19 Nov 2022
17 Dec 2022
3 Dec 2022
19 Nov 2022 - 26 Nov 2022
Amount
E/M Portion
Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of LT/HT cable as in any type of soil and getting out complete all as specified and directed.
All as per ser item No 1 above but depth exceeding 1.5 m and not exceeding 3 m.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.
Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.
Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I complete all as specified.
Material and labour for kiln burnt Sub class 'B' bricks laid dry, flat, width wise along the length of cable in trenches after sand cushioning for protection of under ground cable complete all as specified and directed.
Plain Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in Bed of poles and stays complete all as specified directed.
Plain Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in pole coping and stay assembly complete all as specified directed.
Plain Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation of poles and stays complete all as specified directed.
Taking down from trenches/duct/wall/or floors etc. old unserviceable LT 1100 volts XLPE/ PILCA cable and Supply & Laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old unserviceable damaged cables of size 16 Sqmm 4 core.
All as per item above but of size 35 Sqmm, 3.5 core.
All as per item above but of size 70 Sqmm, 3.5 core.
All as per item above but of size 95 Sqmm, 3.5 core.
All as per item above but of size 120 Sqmm, 3.5 core.
All as per item above but of size 185 Sqmm, 3.5 core.
Taking down from trenches/duct/wall/ or floors etc. old unserviceable HT 11KV XLPE/ PILCA cable and Supply & Laying and commissioning and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 11000 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old unserviceable damaged cables of sizes 95 Sqmm 3 core.
All as per item above but size 120 Sqmm, 3.5 core.
S & F in replacement steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-31 (9.0 metres long) including drilling of holes of reqd size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally & portion embedded in concrete, making five black & yellow bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height all as specified and directed.
S & F in replacement steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-55 (11.0 metres long) including drilling of holes of reqd size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally & portion embedded in concrete, making five black & red bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height all as specified and directed.
S&F in replacement of Cross arms, bracing, supports clamps and back plates, fabricated from structural steel sections including nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed incl one primer, one under coat and one finishing coat of aluminium paint over prepared steel surface.
M&L in replacement of ACSR conductor of any size and any type including stretching, fixing and binding to insulator on OH HT/LT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified. This item includes all consumables (such as binding wire and replacement insulators and cross arms, etc., for replacement of damaged ones found after/ during replacement process).
M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 150 mm height, 150 mm dia for 11000 volt grade all as specified.
Supply only of Disc Type Porcelain , vitreous, white, brown or green insulators for working pressure 11000 volts grade, with bolts, washers and nuts, complete all as specified and directed.
M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified.
M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100 volt grade all as specified.
M&L in replacement of Stay assembly for electric pole complete with accessories as shown in electrical plate No 1 of SSR Pt-I and drg using loop type insulator, stay clamps, stay rod of 16 mm dia including stay wire of size 7/3.15 mm (excavation and concrete to be measured separately)
Supply only in replacement of On load changover switch 415 volt in sheet metal enclosure 3/4 pole of capacity from 320 Amp complete all as per existing sample all as specified and directed by Engr-in-Charge. Make : Havells Cat Patr No - IHCNF00320 or equivalent in HPL, STANDARD, INDO ASIAN.
Supply only in replacement of On load changover switch 415 volt in sheet metal enclosure 3/4 pole of capacity from 630 Amp complete all as per existing sample all as specified and directed by Engr-in-Charge. Make : C & S Cat Patr No - CSCS315DM4CO or equivalent in HPL, STANDARD, INDO ASIAN.
Painting to HT poles, 11 mtr with cross arms, bracing and clamps with one coat of synthetic enameled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of Yellow and black from foot of pole upto 5 feet each strip of 30 cm height all as specified and directed.
All as per description of item above here-in-before but for LT pole 9 mtr long and painting strips of yellow & black from foot of pole upto 5 feet each strip of 30 cm height.
Restretching of LT /HT ACSR conductor and GI wire of any size and on any type of poles carrying upto six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including re-fixing/re-adjusting line spans, line separators, cross arms on poles all as specified.
Cutting /Trimming/ Chopping of tree trenches along the overhead lines upto 3 m from elect lines clearance on both sides of HT/LT lines and disposing off the cut tree/ branches site to a distance not exc. 50 m and clearing the site as directed.
Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Aluminium conductor cable of size 50 sqmm to 95 sqmm.
Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Aluminium conductor cable of size 120 sqmm to 185 sqmm.
Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for indoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Aluminium conductor cable of size 50 sqmm to 95 sqmm.
Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for indoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Aluminium conductor cable of size 120 sqmm to 185 sqmm.
M&L for Earthing complete with galvanised steel earth plate electrode 60 × 60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.
Supply, installation, commissioning and testing switch air break, gang operated with 12 insulator switch tripple pole mechanically operated, mounted on insulators and steel frame with mechanism worked from ground level for current rating 400 Amp operating voltage 11 KV outdoor type vertical mounted type complete with locking arrangment, asembly with fuse mount carrier and fuse element of required capacity and isolate suitable for 11 KV including necessary electric connection and 11 KV Fuse (drop out type) of capacity 10 Amps. complete with DO fuses with one number operating rod of 25 mm dia bore grade GI pipe of suitable length worked out from ground level and handle complete including flat iron clamp 50mmx6mm, MS channel of suitable size & length for fixing GOD including nut bolt washers including taking down existing set all as directed by Engineer-in-charge.
Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp, 11000 volts grade complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED Flood light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 16 Sqmm complete all as specified and directed.
M/S ASHRAF CONSTRUCTIONS
POPULARHARDWARESTORE
FG CONSTRUCTION
m/s mohd saleem and co
M/s Pall Constructions
M/S MOHD YOUSUF CONSTRUCTION CO
Bidder Name
FG CONSTRUCTION
M/S ASHRAF CONSTRUCTIONS
POPULARHARDWARESTORE
M/s Pall Constructions
GH MOHD SHAH AND CO
m/s mohd saleem and co
M/S MOHD YOUSUF CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .