REPAIR TO SANITARY FITTINGS, TILING , AND SUNKEN SLABS INCLUDING PLUMBING WORK , PERIODICAL SERVICES AND REPAIR TO JOINERY INCLUDING PLASTERING AND WELCOME MAINTENANCE TO CERTAIN BUILDINGS AT AF STN YEOUR UNDER GE AF THANE

Amount

Material and labour for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in filling in sunkun floor ,complete all as specified & directed.

M&L for Cutting holes into or through cement concrete slabs, chajjas, etc.of superfacial area n.exc 100 sqcm for inserting pipe as in sunken portion to faciliatate efficient drainage including packing with PCC 1:3:6 after inserting pipe ,complete all as specified & as directed by Engr-in-charge.

Supply only Liquid water proofing compound ,complete all as specified & as directed by Engr-in-charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required ,complete all as specified and as directed .

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified & as directed by Engr-in-charge.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkhats ,complete all as specified & as directed by Engr-in-charge.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated ,complete all as specified & as directed by Engr-in-charge.

S&F 40mm thick Flush shutters,solid core construction,with block board core and one face plywood face commercial type panels, other face is covered with decorative face veneer with lipping/frame to match existing surface etc, ,complete all as specified & as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters form frame) n. exc 1.5 sqm each, complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters form frame) . exc 1.5 sqm & n.exc 4 sqm each , complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, Shutters of any description having area n.exc 1 Sqm each and Refixing in same opening,complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, Shutters of any description having area exc 1 Sqm and n.exc 2 Sq.m each and Refixing in same opening ,complete all as specified and directed.

S&F ,in repairs, shutters of any description having area n. exc 1 sqm each including easing & adjusting without taking down , complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, shutters of any description having area exc 1 sqm but n. exc 2 sqm including easing & adjusting without taking down , complete all as specified and as directed by Engr-in-charge.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube including fixing in opening with stainless steel screws of required size , complete all as specified and as directed by Engr-in-charge.

S&F factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, including fixing in frame at site as per specification & drawing with provision of 3 Nos of stainless steel hinges of 100 mm size , 2 Nos of aluminium handle of 100 mm size and 2 Nos of tower bolt of 100 mm long , complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolt 200mm long of extruded section , complete all as specified and as directed by Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm length and fixing clips of sheet, cast or extruded sections including fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed by Engr-in-charge.

S&F butt hinge of 100 mm size, medium weight, cold rolled mild steel , complete all as specified and as directed by Engr-in-charge.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed by Engr-in-charge.

S&F extruded aluninum alloy handle of 150mm long , fabricated type anodized , complete all as specified and as directed by Engr-in-charge.

S&F, in repair, Brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges , complete all as specified and as directed by Engr-in-charge.

S&F Floor door stopper 150mm length of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor , complete all as specified and as directed by Engr-in-charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as specified and as directed by Engr-in-charge.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-charge.

Material and labour for glazed ceramic colour tiles 300x200 x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) , complete all as specified and as directed by Engr-in-charge.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed as bedding layer in CM(1:6) , complete all as specified and as directed by Engr-in-charge.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises , complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description etc incl racking out joints, hacking for key and scrubbing down with water etc , complete all as specified and as directed by Engr-in-charge.

M&L for rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement all as specified , complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.

M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) , complete all as specified and as directed by Engr-in-charge.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering in CM (1:4),15mm thick on wall of sunken floor suraces finish the surface even and smooth without using extra cement mixed with water proofing compound , complete all as specified and as directed by Engr-in-charge. (Note : WPC will be measured and paid in supply only rate)

M&L for 3mm thick one coat of wall care putty on wall , complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on ceiling , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surfaces plastered or unplastered old surfaces of walls and apply one coat of white wash, complete all as specified and as directed by Engr-in-charge.

–Ditto- all as per Srl item no 37 above but on ceiling.

–Ditto - all as per Srl item No 37 above but colour wash on walls

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of distemper oil-emulsion on walls , complete all as specified and as directed by Engr-in-charge.

M&L for washing,rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil-emulsion on ceiling , complete all as specified and as directed by Engr-in-charge.

M&L for Complete removal of existing treatment of distempered and painted surfaces of wall and applying two coat of distemper oil-emulsion over a coat of alkali resist primer on walls , complete all as specified and as directed by Engr-in-charge.

M&L for preparing new plastered surfaces of wall and applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified.

M&L for preparing new plastered surfaces of ceiling and applying two coats of OBD over a coat of alkali resistant priming paint , complete all as specified and as directed by Engr-in-charge.

M&L for Preparing new plastered surfaces of ceiling and applying two coats of white wash , complete all as specified and as directed by Engr-in-charge.

S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.

S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old wooden surfaces of any description over 10 cm width & girth not otherwise described and applying one coat of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted surface of wall & applying a coat of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted steel surface & applying a coat of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge.

Supply and fix 50mm GI pipe, medium grade in isolated length of 400mm long inserting into wall surfaces with 100mm projecting from the external face of wall as in water draining spout, complete all as specified and as directed by Engr-in-charge.

M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and as directed by Engr-in-charge.

M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and as directed by Engr-in-charge.

S&F GI tubing medium grade 25mm dia with all fittings and fixed complete to walls, ceilings or floors etc , complete all as specified and as directed by Engr-in-charge.

Taking down steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe , complete all as specified and as directed by Engr-in-charge.

Taking down steel tubing & connections including cleaning for refixing or removal to store for 20mm bore of pipe all as specified and directed by Engr in Charge.

M&L Taking up or down 25mm dia steel tubing and connections incl cleaning for refixing or removal to store.

Refixing old GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) of 15 mm bore of pipe , complete all as specified and as directed by Engr-in-charge.

Refixing old GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) of 20 mm bore of pipe all as specified and directed by Engr in Charge.

M&L for Cutting existing 15/20/25 mm steel tubing for alterations or additions in any position without taking down (Each cut measured) , complete all as specified and as directed by Engr-in-charge.

Dismantling water tank capacity exc 250 and n exc 500 ltr and removing to store , complete all as specified and as directed by Engr-in-charge.

Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store , complete all as specified and as directed by Engr-in-charge.

Dismantling water tank capacity exc 1000 and n exc 2000 ltr and removing to store , complete all as specified and as directed by Engr-in-charge.

M & L For cleaning of Over head PVC Service Tank upto 500 Liters of capacity ,internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with roatary sets with approved detergents and sucking all dirty water by avaccum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as directed by Engg-in-charge. NOTE:- It is noted that cleaning of OH PVC service tanks are safely to be handled and if any damage and bracking of tanks happen during cleaning it shall be rectify by contractor at his own cost,nothing shall be paid extra on htis account.

Ditto as per Srl Item No 66 above but exc 500 ltr and n.exc 1000 ltrs capacity.

Ditto as per Srl Item No 66 above but exc 1000 ltr and n.exc 2000 ltrs capacity.

S&F 500 Ltr Rotational moulded polyethene water storage tanks,triple layered (Cylindrical vertical with closed top) hoisted and fixed in position , complete all as specified and as directed by Engr-in-charge.

S&F 1000 Ltr Rotational moulded polyethene water storage tanks, triple layered (Cylindrical vertical with closed top) hoisted and fixed in position ,complete all as specified and as directed by Engr-in-charge.

S&F 2000 Ltr Rotational moulded polyethene water storage tanks , triple layered (Cylindrical vertical with closed top) hoisted and fixed in position ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle but fancy type screwed down screwed for iron pipe complete all as specified and directed.

S&F, in repairs ,Pillar taps, 15mm cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-charge.

S&F 15mm dia pillar tap chromium plated cast copper alloy with capstan head, fancy type screwed down high pressure with or with out letters Hot or cold with long screwed, fly-nuts,for iron pipe , complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, brass CP mixer for mixing hot & cold water screwed down for iron pipe15mm dia ,complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs,stop cock valves 15mm cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type, chromium plated screwed both ends for iron pipe or for unions , complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, concealed type long shank stop valves CP Brass fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia , complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr in Charge.

S&F ,in repairs, 20mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms ,complete all as specified and directed by Engr in Charge.

S&F ,in repairs, PVC connection for 15mm bore 600mm long with brass connections & washers ,complete all as specified and directed by Engr in Charge.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp ,complete all as specified and directed by Engr in Charge.

Ditto as per Srl item No 81 above but for 75 mm bore.

Supply and fix CI bends of 100mm dia fitted with oval access doors ,complete all as specified and directed by Engr in Charge.

Supply and fix CI bends of 75 mm dia fitted with oval access doors ,complete all as specified and directed by Engr in Charge.

Supply and fix CI branch pieces "T" or "Y" type 100mm dia ,complete all as specified and directed by Engr in Charge.

Supply and fix CI branch pieces "T" or "Y" type 75 mm dia ,complete all as specified and directed by Engr in Charge.

S&F,in repair, CI cowl of 100mm dia ,complete all as specified and directed by Engr in Charge.

S&F,in repair, CI cowl of 75 mm dia ,complete all as specified and directed by Engr in Charge.

S&F,in repair, 110mm bore PVC(SWR) pipe single socketed in any length with rubber ring joint fixed to wall ,complete all as specified and directed by Engr in Charge.

S&F,in repair, 75mm bore PVC(SWR) pipe single socketed in any length with rubber ring joint fixed to wall ,complete all as specified and directed by Engr in Charge.

S&F,in repair, UPVC bend/shoe 110mm dia,complete all as specified and directed by Engr in Charge.

Ditto as per Srl item No. 91 above but for 75mm dia pipe ,complete all as specified and directed by Engr in Charge.

Supply and fix UPVC (SWR) branch pipes single Y equal or unequal or `T' junction 110mm dia with access door ,complete all as specified and directed by Engr in Charge.

All as per item No. 93 above but 75mm dia pipe.

S&F ,in repair, PVC (SWR) junction single T equal or unequal 110mm bore ,complete all as specified and directed by Engr in Charge.

S&F, in repair,PVC (SWR) junction single T equal or unequal 75mm bore ,complete all as specified and directed by Engr in Charge.

S&F 110mm dia UPVC (SWR) vent cowl including dismantling the existing one complete ,complete all as specified and directed by Engr in Charge.

S&F 75mm bore PVC (SWR) vent cowl ,complete all as specified and directed by Engr in Charge.

Supply and fix Cast Iron floor trap, 75mm dia out let with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 including taking down old floor trap ,complete all as specified and directed by Engr in Charge.

S&F ,in repair, cast iron Nahani trap of 100mm dia including jointing to waste pipe fixed in cement concrete type 1:2:4 type B1 ,complete all as specified and directed by Engr in Charge.

S&F,in repair, PVC (SWR) 75mm bore floor trap, plain with grating including jointing with solvent cement ,complete all as specified and directed by Engr in Charge.

Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement ,complete all as specified and directed by Engr in Charge.

S&F,in repair, salt glazed stoneware Gully traps "P" type of size 100x100 mm including setting the trap and pan in 100mm thick all around lime concrete (1 lime : 2 sand) ,complete all as specified and directed by Engr in Charge.

S&F,in repair, Soap dish, SS chromium palted, fixed to plugs with chromium plated brass screws ,complete all as specified and directed by Engr in Charge.

S&F,in repair,low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float chain and ball bracket & capacity 10 ltr ISI marked including 32mm PVC flush pipe ,complete all as specified and directed by Engr in Charge.

S&F,in repair, vitreous china wash hand basin white flat back size 630 x 450 mm excluding taps waste chain and plug and porcelain stopper and including brackets ,complete all as specified and directed by Engr in Charge.

S&F,in repair, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ,complete all as specified and directed by Engr in Charge.

S&F,in repair, orrisa pattern viterious china ware water closet white glazed of pan size 580x440mm with integral foot rest fixed flushed pipe including all joints and making good to the floor ,complete all as specified and directed by Engr in Charge.

S&F,in repair,wash down water closet (EWC) (pedestal pattern) complete(excluding flushing cistern or flush pipe) ,complete all as specified and directed by Engr in Charge.

S&F,in repair, low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float and ball handle & capacity 10 ltr ISI marked including 32mm PVC flush pipe ,complete all as specified and directed by Engr in Charge.

S&F,in repair, vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets ,complete all as specified and directed by Engr in Charge.

S&F,in repair, plastic water closet seat cover white or coloured closed pattern with flat bottom and cover and mild steel hinge chromium plated ,complete all as specified and directed by Engr in Charge.

S&F,in repair, brass cromium plated shower rose with swivel joint 125 mm size ,complete all as specified and directed by Engr in Charge.

S&F,in repair, sink made of stainless steel 1.00mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm & bowl 410mm X 330mm X 160mm including PVC waste pipe & connection ,complete all as specified and directed by Engr in Charge.

S&F,in repair, sink with drain board made of stainless steel 1.00mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm & bowl 410mm X 330mm X 160mm including PVC waste pipe & connection ,complete all as specified and directed by Engr in Charge.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including disposal of rubbish out from MD land, ,complete all as specified and directed by Engr in Charge.

Dismantling cast iron drain pipes of any description ,complete all as specified and directed by Engr in Charge.

M&L for opening out cracks by cutting V shape with appropriate equipment on surface of external wals of the building, removing the loose material. Filling with polymer modified mortar and applying two coats of cross link polymer Ru-flex WG or equivalnt chemical as per approval. Ru-flux WG to be mixed with cement and water in 1:0.9::0.10 ratio where 1 part Ru-flex, 0.9 part cement & 0.10 part water thoroughly mixed to form a brushable slurry and applied with a regular paint brush (or as per technical specification of crack filling chemicals of approved make) ,complete all as specified and directed by Engr in Charge.

M&L for Preparing new plastered surfaces of wall including applying two coats of acrylic weather proof paint paint over a coat of weather coat primer ,complete all as specified and directed by Engr in Charge.

M&L complete removal of existing treatment on wall including removal of grass and applying two coats of acrylic weather proof paint paint over a coat of weather coat primer ,complete all as specified and directed by Engr in Charge.

M&L preparation old painted surfaces of wall including removal of grass and applying one coats of acrylic weather proof paint (Up to four story of height of building) ,complete all as specified and directed by Engr in Charge.

Materials & labour for water proofing treatment to sunkun floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm all as specified. (b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and all as specified. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment all as specified. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 10 cm which should be measured and paid separately,

M&L for writting date on wall with synthetic enamel paint , writing letters or figures (in block, roman, etc ) exc 10 cm and n.exc 15 cm hight as "OHT CLEANED ON : DD/MM/YY" over a coat of synthetic enamel paint as backround in rectangular shape, all as specified and directed by Engr in Charge.

S&F ,in repair ,aluminum anodized windows/doors with necessary accessories/fitting after taking down and refixing after replacement of broken aluminium section, rectification of roller, wiremesh, window panes,sheet glass etc Note : All items used in rectification shall be paid separately under Srl Item No. 127 to 131

Supply only aluminium anodised powder coated frame for doors/windows, ventilators and aluminium section for windows as directed

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane

Safe Construction Co.

Vinod Enterprises

Biju Construction & Co

askonstruct and supplier

Nissan Electricals