CERTAIN REPAIR/ MAINT OF INTERNAL E/M ITEMS AT MIL STN ABOHAR.

Amount

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch with sheet, ceiling rose including rusted/broken concealed conduit, junction and sunken boxes etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2mm thick galvanised steel pressed sunken box suitable for both paino type fittings and for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the Normal and modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) and existing colour combination complete all as specified and as directed. (switches/ socket / regulator shall be measured and paid separately under appropriate item of BOQ). Note :- Modular base and cover plate for fixing of modular accessories supplied suitable for as per sch "B" items.

All as per Item No.2 above here in before but for One three pins 5/6Amps switch socket outlet point on independent board

All as per Item No.2 above here in before but for One three pins 5/6 Amps switch socket outlet point on same board with other switches

All as per Item No.2 above here in before but for One light point controlled by two 2-way switches of 5/6 amps.

All as per Item No. 2 above here in before but for One bell/ buzzer point controlled by one push button with other switches on independent board with cables 1.5 sq.mm size cable.

Description all as per item No.2 above here in before but for 15/16amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Description all as per item No.2 above here in before but for 15/16 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Material and labour formodular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Material and labour for modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Material and labour for modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Material and labour for modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Material and labour for modular Fan regulator, single pole, one way compatible with BLDC fan complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Material and labour for Ceiling rose, 3 terminals/phase type, fabricated of PVC/ Polycarbonate, isolated body complete, Make-Anchor/SSK/CONA

Material and labour for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Material and labour for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete, including provision of 1 x 10 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

Description all as per item No.16 above here in before but 2 Runs of 6 sqmm complete in PVC conduits/ complete all as specified.

Description all as per item No.16 above here in before but 2 Runs of 4 sqmm in PVC conduit and its fittings complete all as specified and directed by Engr-In-charge.

Material and labour for sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 125 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed.

All as per Item No.19 above here-in-before but TPN DB 8 Way double door type complete all as specified and directed.

Material and labour for sheet metal enclouser SPN DB having facility to fix MCCB in incomer and MCBs in outgoing, SPN 8 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including 01 nos MCB DB and 06 Nos MCB SP and old dismantling and making good disturbed surfaces complete all as specified and directed.

Material and labour forsheet metal enclouser SPN DB having facility to fix MCCB in incomer and MCBs in outgoing, SPN 12 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including 01 nos MCB DB and 10 Nos MCB SP and old dismantling and making good disturbed surfaces complete all as specified and directed.

Material and labour for 2mm thick galvanised steel pressed sunken box suitable for both paino type fittings and for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the Normal and modular switches/ socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed.

Material and labour for LED 2x2 Square Panel light of capacity 36 watt ultra modern recess mounting luminarire with high performance LEDs, suitable for mounting with armstrong/Grid ceiling// also fix with back cover in case of without false ceiling complete as specified.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete.

Taking down ceiling fan of 1200/1400 mm sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, servicing/overhauling and replacement of bush, bearing, condenser and painting complete all as specified and directed and writing MES number as as directed by Engr-in-Charge. (Note :1. Bush, condensor, ball bearing are measured and paid separately as supply only rates and minor spares like , rubber bush shackle,holder deemed to be include in quoted rates ) 2. Repair/Servicing of fan shall be carried out in MES yard/User site to bring adequate serviceable condition winding machine,tools & plants and necessary motor winder at site as directed.

Labour only for fixing of LED tube light 10/20 watt issued vide sch "B" as as directed by Engr-in-Charge.

Labour only for fixing of Modular switch 6 Amps issued vide sch "B" as as directed by Engr-in-Charge.

Labour only for fixing of Modular switch 6/16 Amps issued vide sch "B" as as directed by Engr-in-Charge.

Labour only for fixing of Modular Socket 6 Amps issued vide sch "B" as as directed by Engr-in-Charge.

Labour only for fixing of Modular Socket 6/16 Amps issued vide sch "B" as as directed by Engr-in-Charge.

Labour only for fixing of Modular Fan regulator issued vide sch "B" as as directed by Engr-in-Charge.

Ramdev Enterprises (BID ID -3290733)

M/s G.V.T. Constructions (BID ID -3294057)

N.R.Builders (BID ID -3290694)

Singla Electricals (BID ID -3293599)

SHIVSHAKTI ENTERPRISES (BID ID -3288487)

MS GURTEJ SINGH CONTRACTOR (BID ID -3290844)

SHIVANI ENTERPRISES (BID ID -3290401)