Remodeling of Balasar Minor from RD 0 to 28200-Tail off-taking at RD 67270-L Bani Disty.

Amount

Dismantling Brick work. Old HSR item NO. 8.5 (b)

Dismantling R.C.C. work. Old HSR item NO. 8.6 (c)

Dismantling of flexible pavement by mechnical means. HSR ITEM No. 11.3

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. HSR ITEM NO. 4.12.1

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. HSR item No. 4.14.1

Excavating, supplying and filling of local earth (including royalty) cum by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete as per HSR item No. 4.33

Bending and fixing iron rungs in lined slopes. As per HSR item no. 14.19

Providing and erecting a 'W' metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level. HSR item No. 14.19

Earth work for 'Lip-cutting' for lining of irrigation channels. HSR item No. 34.32.1

Supply of polythene sheet 150 micron thick. N.S.

Laying of polythene shhet 150 micron thick. N.S.

Centering and shuttering including strutting, propping etc(foundation and beam,footing). HSR item no. 6.29.1

Centering and shuttering including strutting, propping etc. andremoval of form work for Columns, piers, abutments, pillars, posts and struts. HSR ITEM NO. 6.29.3

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs. HSR ITEM NO. 6.30.3

Steel reinforcement for R.C.C. work, where not included in thecomplete rate of RCC, including straightening, cutting, bending,placing in position. HSR ITEM NO. 6.33.6

Lining with design mix concrete of grade M-15 with minimum cement content 240kg/cum, 75mm thick in curve portion and bed manually including rendering with 10 mm cement plaster (1:5) (In BED) (Derived)

Lining with design mix concrete of grade M-15 with minimum cement content 240kg/cum, 75mm thick in curve portion and side slope manually including rendering with 10 mm cement plaster (1:5) .(In SIDE SLOPE) (Derived)

1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) HSR ITEM NO. 6.1.6

Providing and laying in position ready mixed plain cementconcrete, with cement content as per approved design mix andmanufactured in fully automatic batching plant M15 CONCRETE sleeper and coping. HSR item no 6.22.2.2. All works upto plinth level.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix. HSR ITEM No. 6.25.1

Cement concret 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth. HSR item No. 6.1.2

Brick work with common burnt clay non modular bricks of class designation 10 in foundation and plinth in: Cement mortar 1:4. HSR ITEM NO. 7.21.1

Extra allowance for form work in concrete lining in bed. HSR ITEM NO. 14.16.1

Restoration of pucca road cut in level in the existing road surface i/c proparation sub grade. Old HSR ITEM No. 24.88

Suplly RCC pipe 900 mm dia NP-3 spigot as per HSR item No. 21.95.8. HSR ITEM no. 21.95.8

Filling expansion joints, with special impervious hot pour, 12.5 mm wide. HSR ITEM no.14.18

Kilometre Stone Reinforced cement concrete M25 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc complete. HSR ITEM no.34.27.2

Boundary pillar Reinforced cement concrete M 15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting. HSR ITEM no. 34.28

Fixing control points by Differential Global Position System (DGPS) instrument at every One Km. along the both side of canal including collection of necessary data etc HSR ITEM NO.14.48

Providing computerised detailed cross section drawings in two copies at 100 m interval with actual profile of river (levels at every 30m. distance along cross section) on A-3 size paper with scale 1 cm = 15m or 1 cm = 30m which is suitable as per site condition. HSR ITEM NO. 14.49

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:1 :2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) HSR ITEM 6.14.2

Removing hume pipes NP2/NP3. Old HSR ITEM No. 8.35 (c)

Supply of APM block

Old Brick masonary

Credit of steel of slab old bridge

Credit of pipe (75% of rate)

Credit of Tile masonry