GE(N)/M-51/2021-22

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats, two coats of synthentic enamel paint complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats and including two coats of synthentic enamel paint complete all as specified and directed. complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 75x50 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats and including two coats of synthentic enamel paint complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed.

M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primerm complete all as specified and directed.

S&F 24 mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer- in-charge. (For W.C. and bathroom door shutter).

S&F Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (Stile) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F Rolled sections as in angle Iron Frame for door , framing for cladding, glazing & for cladding, glazing & the like fixed with angle cleats & connecting plates, etc complete all as specified and directed.

M&L Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces complete all as specified and directed.

M&L Preparation of old steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 75 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F 300 mm MS Rat tail door spring for door closer, complete all as specified and directed

S&F 100mm hasp and staples, safety type of aluminium anodised complete all as specified

S&F 2nd class hard wood Small fitting such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours; articles n exc 200cu.cm each complete all as specified and directed.

S&F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190gm) complete all as specified and directed.

S&F in repair 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and directed.

Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L Brick work with old servicable bricks retrieved from dismantling straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 complete all as speecified and directed.

M&L Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) complete all as specified and directed.

M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement with WPC complete all as specified and directed. (Note WPC shall be measured and paid seperately)

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / Chajjas, roof projections, drainage etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

M&L Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint including curing complete all as specified & directed.

M&L Preparing new /Old wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic, antifungal emulsion exterior weather proof paint on external surfaces, complete all as specified and directed.

M&L two coats of distemper oil emulsion over primer coat after application of wall care putty to obtain even and smooth surface including preparation of new pastered wall surfaces complete all as specified and directed

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed.

M&L two coats of distemper oil emulsion over over primer coat after application of wall care putty to obtain even and smooth surface including preparation of old wall surfaces complete all as specified and directed

M&L two coats of white wash on surface of wall including preparation of old plastered surface complete all as specified and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as specified and directed.

M&L Preparation of old surface after complete removal of existing treatment making the surface smooth after applying wall care putti to obtain even and smooth surface and applying two coats of cement base paint over a coat of alkali-resistant priming paint complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position and removal of rubbish complete all as specified and as directed.

M&L Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and as directed.

M&L for 75 mm thk PCC 1:4:8 type D-2 as in sub base to flooring complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paving blocks with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and as directed. Make- Mohindra Industries/KB / Unistone

M&L Providing cement concrete Type B-0 (1:2:4), 12.5 mm graded stone aggregate as in coping, benching, edging, etc complete all as specified and directed.

M&L sand filling in floors or paving including leveling watering and consolidation complete all as specified and as directed.

M&L 25 mm thick Plain cement concrete 1:2:4 type B-1, ( using 20 mm graded stone aggregate) in subbase, subfloors, base floors etc complete all as spd and directed.

Dismantling old floor tile including cement mortar bedding and removal of debris out of premises complete complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement including rendering 10mm thick in CM (1:4) and finished rough, including taking down cement plaster on walls etc complete all as specified and directed.

M&L for non skid (joint free) ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) and finished rough, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L marble shade of green/ Black Marble Bhaislana Zebra stone slab 12mm thick (table rubbed and polished) in cooking plateform, window cill, steps etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L Round chamfering, to the edges of marble slabs complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 15 mm bore medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 20 mm bore medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

S&F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs complete all as specified and directed. Make - Jaquar , Marc, Johnson

S&F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , complete all as specified and directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified and directed.

S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass sheof 12cm wide with chromium plated brackets guard & railing 60cm long complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) complete all as specified and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x430mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and directed.

M&L Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float. Dismantling of existing PVC tank of any capacity and removal from site complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm double bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed .

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs complete all as specified and directed.

S&F in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F in repair Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs complete all as specified and directed.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed.

S&F in repair cast iron cowl for 50 mm dia complete all as specified and directed.

S&F in repair cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 50 mm pipe complete all as specified and directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed.

M&L APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

S&F factory made RCC manhole cover with frame( for manhole iner opening 60 cm) complete all as specified and directed.

Supply only liquid water proofing compound.

M&L Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal aginst wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP spreader, brackets, flush pipe grating, union with discharge pipe, etc complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) set in cement mortar 1:4 as in slab for water tank/shelf, landings, cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with plain faces complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing the same complete all as specified and directed.

Disconnecting of existing tanks, exc 250 and n exc 500 ltrs setting aside or) lowering if requared) for repairs, cleaning etc and hoisting if requared reconnecting and refixing inposition complete all as specified and directed.

Removing excavated material exc 250m but n exc 500 m and depositing where directed complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

M&L for Soling (or sub base) 100 mm thick (spread thickness) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for cement concrete work in hardstanding of flextural strength 40 kg/square centimetre in field using minimum 400 Kg of cement per cubic metre of concrete thickness of concrete 250 mm or less complete all as specified and directed.

M&L Finishing surface of concrete hard standing / road rough by brooming complete all as specified and directed.

M&L Forming Construction joint 30 mm deep x 10 mm wide, filled with sealing compound grade 'B' complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed.

M&L Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 80 mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5 mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as specified and directed.

Taking down carefully unsv copper/aluminium point wiring ( light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors etc.

M & L for point wiring with 3x1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 volts grade of colour coding as per IS Specification (earth conductor shall be connected to common earth dolly) drawn through and including PVC rigid concealed conduit having thickness not less than 1.8 mm (ISI marked) with all accessories including sheet steel /CI terminal box of adequate size having thickness not less than 2 mm including 3mm thick hylem/masonite sheet complete all as specified as directed for the following :-

One light point controlled by one switch 5 Amp, SP, one way 240 volts.

One Ceiling/Exhaust fan point controlled by one switch SP, one way, 5 Amp, 240 Volts .

One light point controlled by 2 way switch SP 5 A 240 Volt

One multipin (3/5 Pin) socket 5 Amps on same board

One multipin (3/5 Pin) socket 5 Amps on independent board

Ditto, all as per item No 124 but using 2.5 sqmm (nominal area) FRLS PVC insulated multistranded copper conductor cable.

S&F in replacement sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit of suitable size and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed.

S&F switch piano flush button single, pole one way, 5 Amp ( ISI marked) complete all as specified and directed.

S & F Socket 2 in 1, 5 pin 5 A (ISI marked) complete all as specified and directed. .

S&F socket outlet 2-in-1, 6 pin, 15/5 Amp flush type (ISI marked) complete all as specified and directed.

S&F switch piano flush button single pole one way 15 amp (ISI marked) complete all as specified and directed.

S&F switch flush button single pole two way 5 amp (ISI marked) complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed.

S & F step type electronic fan regulator flush type complete all as specified and directed

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED lamp 12 watts 230 volts retfrofit suitable for any type lamp holder as required.

S & F in replacement SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC having copper bus bar of rating 200Amps complete all as specified and directed. Make- Legrand/Hager/Schneider/L&T

S&F MCB single pole with neutral 240 volts 32 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA, of rating 5 to 32 Amp all as specified and directed.

S & F in replacement High efficiency LED linear tube 1X18 watt, 6500 K, 230 volts wall mounted with LED batten(Channel) complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells, philips, Bajaj and CG

S & F in replacement LED mirror light, (1 x 09)/1x10) watt prewired with all accessories including lamp complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.Cat Part No LCL-07-CDL complete all as specified and directed. Make - Cromptono or equivalent make- Havells, philips, Bajaj

S&F LED Building light 1x30 watt made out of pressure die-cast aluminium with polycarbonate cover IP65 protection including 32mm bore GI pipe light grade bracket mounted using clamps, nuts bolts, washers, fastners etc. Complete all as specifed and directed. Make: Cat NoLHEWDRP7PN1W025 of Havells equivalent Halonex/Wipro

S & F in replacement LED Bulk head 1 x 10 watt energy efficient wall mounted, pressure die cast aluminium housing & enclosed with poly carbonated cover with all accessories including LED lamp complete including connecting up with three core twisted flexible copper conductor cable of suitable size. Make- Cat Part NoLHEXCGP7PN5W010 of Havells or equivalent make- philips, Bajaj' Crompton

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 72,338.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

dadwal engineers

M/S CANTILEVER ENGINEERS

M/s gurdial singh and co

M/S DUGGAL CONSTRUCTION CO

VOHRA CONSTRUCTION CO