GE/Token-49/2025-26

Amount

Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified..

Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), upto G+5 storey bldg complete all as specified.

All as per serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used).upto G+5 storey bldg complete all as specified.

Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified.

M & L for 15 mm thick internal rendering in cement mortar 1:6 other than fair face of brick walls/ concrete surfaces finished complete all as specified.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface even and fari finished d complete all as specified.

Preparation of newly plastered surfaces of walls and applying two coats of distemper over a coat of primer, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots complete removal of existing treatment etc and applying one coat of washable distemper on wall surfaces including preparation of surfaces by primer and filling cracks/holes with putty, up to G+5 storey bldg complete all as specified.

Description all as per serial item No. 9 above, but two coats of washable distemper, complete all as specified and directed.

M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge.

Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots etc and applying two coat of white wash on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, up to G+5 storey bldg complete all as specified.

Description all as per serial item No. 12 above, but on ceiling, complete all as specified and directed.

Preparation of old painted wood or wooden based surfaces of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint, upto G+5 storey bldg complete all as specified.

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, upto G+5 storey bldg complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for 595mm to 605mm x 595 mm to 605 mm x7-8 mm rectified coloured ceramic tiles, joint free, as approved by Garrison Engineer in floors over 15mm thick screed bed in CM 1:6, G+5 storey bldg complete all as specified.

M&L for 595 mm to 605 mm x 100 mm x 7-8 mm thick rectified coloured tiles as skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 G+5 storey bldg complete all as specified..

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) G+5 storey bldg complete all as specified.

M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and over including rendering 10mm thick cement mortar in CM 1:4 G+5 storey bldg complete all as specified.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old pipes and necessary cutting through RCC roof and brick work etc and making good all as specified.

S&F of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified.

Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified.

All as per item no. 23 here-in-before but dia of GI pipe is 15mm.

S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etc complete all as specified an directed.

All as per item no. 25 here-in-before but dia of GI pipe is 15mm.

Cutting chases, pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1;3 ,cutting exc 10cm but n.exc 20cm girth complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed.

S & F in repairs vitreous China coloured European type WC with "P" or "S" trap and Seat cover for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous chinaware coloured wash hand basin of size 540mm x 400mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge.

S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 x 440 mm white with "p"or "S" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC connection pipe of 1/2"x18" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge.

Taking down shutter Not.exc 2 sqm each of any description complete all as specified.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame)

M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, shutter of cupboard/kitchen cup board/loft board complete all as specified and directed.

Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely). Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge.

S&F butt hinges medium weight, cold rolled SS and fixed size of hinge 100mm complete all as specified.

S&F 150mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.

S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified.

S&F for Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality (Make-VISTA) (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two number of latto on both end s of curtain rods, complete all as specified and directed by Engr-in-Charge.

Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through Existing non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC insulated unsheathed copper cable FRLS as earth continuty, suitable fabricated branded modular metal flush box / M S steel terminal boxes duly make embossed, concealed in wall and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular inner and outer cover plates with laminated top sheet cover for housing switches , socket out let and fan regulators etc concealed in walls with suitable , all as specified and as directed for the followings:-

One light/fan point controlled by one way switch.

One bell / buzzer point controlled by one bell push.

One light point controlled by two Nos two way switches.

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 47 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through including non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC insulated unsheathed copper cable FRLS as earth continuty, suitable fabricated branded modular metal flush box / M S steel terminal boxes duly make embossed, concealed in wall and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular inner and outer cover plates with laminated top sheet cover for housing switches , socket out let and fan regulators etc concealed in walls with suitable , all as specified and as directed for the followings:-

One light/Exh fan point controlled by one way switch.

One bell / buzzer point controlled by one bell push.

One light point controlled by two Nos two way switches.

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 49 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete.

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 1 module / 2 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately.

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 3 module / 4 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately.

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 6 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc. including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately.

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 8 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately.

Supply only replacement white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 3/4 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 6 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 8 module complete all as specified and directed by Engineer in charge.

M&L switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified.

M&L Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified.

M&L switch modular type 6 amp SP two way, 1 module complete all as specified.

M&L Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete.

M&L switch Modular type 16 Amps 1Way, 1 module with modular plat, 230V AC complete.

M&L Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete.

M&L modular stepped type electronic fan regulator 120W, 2 module complete.

M&L Switch piano flush button type single pole one way 6 Amps complete all as specified.

M&L switch piano flush button type single pole 16 Amps complete all as specified.

M&L socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified.

M&L socket outlet 6 Amp flush button type complete all as specified.

M&L regulator electronic switch/socket type 5 steps suitable for 1200/1400 mm sweep 230 volts..

M&L bell electric (dingdong) 230 volt, SP all complete all as specified and directed .

M/L insulated body, angle holder with back plate complete.

S&F ceiling rose surface PVC type with three terminals complete all as specified and directed.

M&L Modular sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 10Amps complete with one single pole MCB 'C' series 10/20 A capacity complete all as specified.

S & F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S & F LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S & F LED 9/10 watts bulkhead fitting with non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25,000 burning hours , Power Factor >0.9, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, , Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge.

S & F surface ceiling mounted, LED down light fitting 12 watts , system efficacy at luminary level ≥ 70 Lumens/watt, 25000 burning hours, 6500K color temperature with , Power Factor > 0.90, with multi stage high voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. .

S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 120 lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:65 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, High and low voltage protection along with a surge protection of 4 KV internal including provision of sutable dia GI light grade pipe1.2 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified.

S&F Sub main wiring with two runs of 4 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories on surface/ concealed in walls complete all as specified and directed. Note: Three runs of 4 sqmm cable shall be measured as one RM.

S&F Sub main wiring with two runs of 6 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories on surface/ concealed in walls complete all as specified and directed. Note: Three runs of 6 sqmm cable shall be measured as one RM.

S&F Sub main wiring with two runs of 10 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories on surface/ concealed in walls complete all as specified and directed. Note: Three runs of 10 sqmm cable shall be measured as one RM.

S & F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar, neutral link earth link complete.

S&F MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar, neutral link earth link complete.

S & F MCB DP 40 to 63 Amps 240 volts 10 KA 50 HZ 'B' curve complete.

S & F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'B' curve complete.

S & F and Replacement of Ventilating Fan upto 250 mm sweep, not less than 1200 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

S&F and replacement of wall mounted fan 400 mm sweep, aerodynamic designed, air delivery ≥ 70 CMM, thermal over load protected motor, 3 blade white colour, 230 volts, 50 Hz, 1500 RPM with 90 degree oscillation and having speed & oscillation control by two pull cords system complete all as specified.

M&L for heavy duty exhuast Fan 300 mm sweep, 1400 RPM, metallic body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.

S&F of ceiling fans three blade, down rods, electronic regulatorand accessories, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, and with remote control complete. Note :- BLDC Fan must be working on both regulator and remote. ( against BLDC conversion).

S&F wall mounted angular Electric chimney black colour of suction power not less than 1200Cum/Hr,Al casette with stainless steel outer layer ,touch sensor control panel, Auto off function, Brush-less DC motor and variation in speed control, oil collector Tray with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of ducting hose of wall mounted angular Electric chimney not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge.

Supply & fix LED Post Top latern lights ,25W ,single phase with decorative LED post top latern lights luminaire with diffuser and painted spun aluminium deflector pre wired and provision of twin core flexible wire,copper conductor of 0.5 Sqmm from light fitting to loop in box complete all as specified and as directed.

Supply & fix LED bollard lights ,10W ,single phase with decorative LED bollard lights luminaire with diffuser and painted spun aluminium deflector pre wired and provision of twin core flexible wire,copper conductor of 0.5 Sqmm from light fitting to loop in box complete and M&L for making foundation for bollard light of size 250mmx250mmx400mm and plastering & painting the surface of foundation complete all as specified and direcetd by Engineer-in-Charge.

M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge.

S&F SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete.

Supply and fixing only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply and fixing only replacement of capacitor 1.5 Mfd, 240 V complete all as specified and directed.

Supply and fixing hole fastner madeup of MS 6" long with complete nut bolt all as specified.

Schedule of Credit

M/S Sunil Steel Works (BID ID -3435462)

A R S CONSTRUCTION CO (BID ID -3435539)

R. S. Associates (BID ID -3435050)

m/s VK construction company (BID ID -3434931)

M/s SAAR ENGINEERS (BID ID -3435801)