Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹26.9 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹29.3 L+₹2.5 L (9.18%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹30.0 L+₹3.2 L (11.8%)Admitted-Finance | L3 | Admitted-Finance | ||
| 4 | L4₹31.2 L+₹4.3 L (16.2%)Admitted-Finance | L4 | Admitted-Finance | ||
| 5 | L5₹32.0 L+₹5.2 L (19.3%)Admitted-Finance | L5 | Admitted-Finance |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
23 Feb 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER PHED RURAL DN BHILWARA
BHILWARA
DMFT AMARGARH
2026_PHCJA_536328_5
NIT NO 155-165/2025-26 EE PHED RURAL DN BHILWARA
Open Tender
Civil Works
Percentage
181 days
BHILWARA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
EXECUTIVE ENGINEER PHED RURAL DN BHILWARA
₹78,000
Yes
9 Mar 2026
7 Feb 2026
23 Feb 2026
7 Feb 2026
23 Feb 2026
7 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing, installation, testing and commissioning of submersible monoblock pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee. | |||||
| 1.1 | 12.5 HP | 5 | Each | 76,487 | ₹3,82,435 |
| 1.2 | 15.0 HP | 2 | Each | 85,567 | ₹1,71,134 |
| 2Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. | |||||
| 2.1 | Above 15 HP and up to 20 HP | 8 | Each | 32,117 | ₹2,56,936 |
| 2.2 | Above 20 HP and up to 30 HP | 2 | Each | 39,375 | ₹78,750 |
| 3Providing & Lowering in tube well ISI marked GI Pipe “B" class as per IS:1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. | |||||
| 3.1 | 50 mm dia | 100 | R.Mtr. | 678 | ₹67,800 |
| 4Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended upto date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended upto date, along with clamping of submersible cable etc. complete in all respect. | |||||
| 4.1 | 75 mm dia | 130 | P Mtr | 303 | ₹39,390 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
159.pdf
Tender Documents • 5.47 MB
BOQ_955468.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .