Miscellaneous modification works in Room no. 3NO1 to 3NO5 at 3rd floor North wing and SPC flooring work in corridors of DCSEM occupied areas in VS Bhavan at Anushaktinagar, Mumbai

Amount

ABSTRACT SHEET

PART - I - CIVIL WORKS

Description of Work / Item(s)

Amount

PART - I - CIVIL WORKS

Dismantling of existing wooden wall paneling, aluminium partitions, Doors, Windows, Ventilators including shutters & frames (chowkhats), Architraves, holdfasts etc. complete and stacking at directed place etc. and disposing the unserviceable materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete. All as directed by the Engineer in-charge.

Dismantling mosaic tile/ white glazed tile/ kotah stone etc.in flooring/ dado/ skirting etc.including dismantling of bedding/ backing mortar and including disposing off debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete as directed by the Engineer in-charge.

Demolishing brick /stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing of unserviceable materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specification & as directed by the Engineer-in-Charge.

a) Brick work.

Dismantling of existing false ceiling of grid type/ fixed or any type from ceiling completely and handover the scraped metal item in maint. office & disposed off debris materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete. All as directed by Engineer-In-Charge.

Removing and refixing a 12mm toughened glass wall partition from a wooden or aluminium frame for rearrangements and making it soundproof by fixing the necessary EPDM gasket While fixing the glass partition, all the work shall be in line, level, etc., and completed as directed by EIC. (Note: While removing and refixing the glass, care shall be taken that the existing glass shall not be broken.)

Providing and Fixing 12mm thick Toughened glass in partition/ door of M/s Modiguard/saint Gobain or other approved equivalent make including providing and fixing necessary EPDM gasket/Neoprane gasket cutting,wastage including disposal of debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by the EIC (Note :- Only the clear opening of glass shall be measured for payment) The Aluminium snap beading if required for work shall be measured and paid under relevant item.

Providing anti termite treatment to the sides of flooring of the existing building as per I.S.6313 (Part-III) by punching holes of 6mm dia. drilled at a distance of 30cm centre to centre and injecting one percent of chlordane emulsion concentrate at the rate of 50ml per hole or Chlorpyrifos 50% EC at 1:19 (One part chemical & 19 part water) and sealing by filling putty etc. complete covering 2 years guarantee on bond paper.

Brick work in ready mix mortar of M/s. Roofit, M/s. Ultratech or equivalent of 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level, simultaneous pointing below ground level, curing, etc. complete all as per specifications & as directed by the Engineer-in-Charge.

b) In super structure at all floors and levels.

Cement plastering 15mm thick using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with pop over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. and removing existing damaged/ worn out plastering and disposing off out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by EIC.

Providing and laying at all floors and levels 6mm.(min.) thick or as per specifications of approved manufactuer first quality matt/ glass finished vitrified tile for dado/ cladding as per the approved pattern and colour as mentioned below of M/s H . R Johnson (I)Ltd., M/s. Kajaria etc. laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cutout if necessary, wastage and final cleaning of surfaces as required, curing etc. complete all as per drawings, specifications & as directed by Engineer in Charge.

In skirting/ dado/ clading of tile Digital Collection series of 300x450/600 mm size with approve colour and design/ pattern etc. tile laid over 12 mm thick CM 1:3 (1cement :3 sand) backing.

Providing and fixing at all floors and levels machine cut & one side machine polished natural granite stones as mentined below for Door/ Window framing, flooring, dado, skirting, cladding etc. and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing, cleaning of stone slabs, wastage, making cut outs wherever required, as per drawing & pattern (includes all the moulding/ chamfering etc.) including removing old floor,dado stacking all the serviceable materials and disposal of the same out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by Engineer in charge. Note: The outer exposed surface on elevation and the exposed vertical finished face shall be measured for payment in sq m. Overlapping, edges, etc. shall not be measured.

Premium quality 18 mm thick granite stone of brown, black, red, or any other shade for door or window framing, dado, skirting, or cladding in sandwich pattern with stone slabs of various sizes in pattern, including 15-20 mm thick 1:3 cement mortar bedding with applying Araldalite over an unpolished surface to the granite stone for fixing, etc., complete as directed by the engineer-in-charge.

Repainting of old painted surfaces with two coats Flat oil paint of approved shade and make over two coats of approved cement primer consist of thoroughly scrapping of all types of old painted surfaces , applying a coat of approved cement primer, filling upthe cracks with approved crack filling compound, applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer over putty work , apply two coats of Flat oil paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as directed by the Engineer-in-Charge.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows, ventilators, boards with SS or sheet metal rivets/ screws joint of specified size, made of integrated bronze/ architect approved anodised finished (15micron thick) aluminium section (extruded) , of approved manufacutres for following types with extruded sections ofJindal / Indal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters (including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/ glazing clips fixed with necessary Stainless Steel/ Sheet metal/ Bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frameand shutter, glass and depositing serviceable material to dept store and disposal of debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as directed by Engineer in charge.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing 6 mm thick clear glass of M/s. Modiguard / Saint Gobain or other approved equivalent make including providing and fixing necesssary EDPM gasket / Neoprane gasket, cutting, wastage including disposal of debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by the EIC. (Note : Only the clear opening of glass shall be measured for payment.). The aluminium snap beading if required for work shall be measured and paid in relevant item.

Providing, fixing, and making furniture items such as wall panelling, cabinets, workstations with table tops and their supports (with or without sandwitch form), drawers, etc. at all floors and locations as per given drawings, Such furniture items shall consist of the following thickness of water-proof marine ply wood of BWP grade AA conforming to IS 710 and be fixed on 2nd class teak wood or anodized aluminium frame work over walls or ceilings in line and level, including suitable SS screws, adhesive, etc., with seamless joints: It is also noted that, while making cabinets or workstations, all the joints shall be fixed with tongue and groove wherever necessary. Work shall include all the necessary tools, tackels, nails, etc., including wastage; making cutouts for electrical fittings and fixtures with shutters; suitable SS handles; SS hinges; for drawer smooth opening and closing, it is necessary to provide ball bearing drawer runners of M/s. Hettich or M/s. Ebco according to the size of the drawers; and completing all as per specifications and pattern as directed by the Engineer-in-Charge. (Notes: i) 2nd-class teak wood frames and anodized aluminium work shall be paid under the relevant item. This item includes all the hardware fittings, such as SS hinges, chains, mangnetic catches, etc. Quote rates accordingly.)

(a) 19 mm thick marine Ply

(b) 12 mm thick marine Ply

(c) 8mm thick marine ply

Providing and fixing second class teak wood in frames of required sections for doors, windows, wall panelling decorative framing, ventilators, clear storey window, partition, railing, battens & rafters, table moulding, decorative post etc. wrought framed and fixed in position including providing and fixing M.S. hold fasts / screws of suitable size including applying one coat of approved wood primer etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing, supplying, and fixing carpentry fittings and fixtures of brass and stainless steel for wicket doors, cabinets, lockers, etc. for smooth functioning of furniture, etc. All the fittings shall be M/s. Shalimar or equivalent.

a) Baby sixer 6 wheel castor nylon swivel wheel for cabinets with 175kg capacity

b) 4" Double action Brass Spring Hinges

c) M/s. Godrej Multipurpose Lock with reversible key (2No)

d) Stainless Steel/ Brass Handles of 8" for Wall Cup Boards

d) Stainless Steel/ Brass Handles of 4" for Wall Cup Boards/ Cabinets

Providing and fixing 3mm thick teak wood decorative veneer of M/s. Greenlam Industries Ltd., M/s. Centuryply Ltd., M/s. Durian, M/s. Timex Veneer, M/s. Flamingo veneers, M/s. Duroply, M/s. Greenply, etc. as per IS 1328: 1996 over marine plywood of various thickness for all types of furniture items such as wall panelling, cabinets, workstations, etc. with the department's approved adhesive shall comply with all the requirements of IS 848:2006. The veneer shall be fixed over plywood as per a drawing issued by an architect, including cutting, pasting, nailing, and making grooves as per the detailed drawings in line and level with necessary cutting, chasing, etc. (No extra payment shall be made for grooves etc. Quote accordigly)

(a) 3 mm thick veneer

Providing and fixing a 1.0 mm thick decorative laminate of synthetic resin bonded laminated sheets with plain or wood grain in gloss or matt finish of approved make with a high density protective surface layer and the reverse side of adhesive bonding quality conforming to IS:2046:1995 having a density greater than 4 gm/cm3 and shall have easy maintenance, good abrasion resistance for long life, excellent stain resistance, easy maintenance, and easy installation with good machinability, including the cost of adhesive of approved quality as per IS:848:2006, including cutting, pasting, finished cutting, scraping smoothly, etc., with all wastage, including disposalout side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by the EIC.

Providing and applying Polyurethane-based wood coating to the new or old teak wood surface vertically or horizontally at any height or width in design, pattern, color, etc., including cleaning of the existing surface of the TW with the help of a scraper, etc., sanding the same surface with 100 grit sand paper, and again re-sanding with 150 to 250 grit sand paper to have a smooth and even surface. Vacuum/dust off all the dust created by sanding from the surface by using a soft brush or cotton cloth; the same needs to be dampened in mineral spirit or water as per the requirement of an oil-based or water-based polyurethane finish. Seal the wooden surface with a mix of polyurethane and mineral spirit in a 2:1 proportion by wearing all the protective gear and allowing it to dry. After drying the surface again, do wet sanding to remove any runs, drips, or bubbles using ultrafine-grit sand paper and allow it to dry. After drying, apply a pure coat of PU by using natural bristles for oil-based and synthetic bristles for water-based, or spray as per manufacturer specifications. Wipe contoured and uneven surfaces with a rag to avoid drips from brushing, etc. Cover all the surrounding area with newspaper, etc. to avoid any splashing, stains, etc. while applying PU. Once the first coat of pure PU has dried (about 24 hours), sand the surface again, apply the second coat of pure PU in the same manner, and wait for 24 hours to dry completely. After this final coat, use a piece of cardboard instead of sandpaper to buff the surface for a nice finish, etc. complete all as directed by the engineer-in-charge.

Providing and fixing premium superior quality Roller blinds of M/s. VISTA with approved best quality fabric as directed by Architect/ E-I-C of required shade and colour, all accessories required for fixing in position all as per approved sample, design, pattern complete all as directed by the EIC Note:Mode of measurement shall be length of aluminium top runner x height from top of channel and up to bottom of blind. ( Note : Agency shall have to provide one year warantee for the roller blinds)

a) With Plain colour

Providing and fixing of 25 micron thick reflective/ Non-reflective/ itching pattern etc. type sun control film of M/s. Garware or approved equivalent make, for windows, doors glasses etc including cutting to size, solution for fixing, cleaning the glass, disposal of debris of outside colony etc all complete all as per specifications and as directed by Engineer in Charge.

Providing and fixing SPC (stone plastic/polymer composite) tiles of 6mm thick of various sizes from the Aristo collection made of M/S. Welspun with a click-n-lock system. The tiles must have durable, waterproof, shatter-, scratch-, and stain-resistant properties and be made up of an anti-fade UV finishing wear layer, decor film, rigid SPC core, cushion backing, etc. The work of laying shall include removing existing PVC tiles, making the surface clean from all foreign materials, making the surface even by applying CM or putty, etc., making all the provisions as per manufacturer guidelines, etc. After surface preparation, lay the polythene over the entire surface where SPC will be laid for insulation purposes. Lay the SPC tiles in a click-n-lock manner tightly with 100mm wide and 12mm skirting materials and other necessary accessories like bedding patties at door threshold crossing, turnings start and end, etc.; all shall be laid or fixed as per the design or pattern given by the architect in passages, rooms, etc. The said materials shall comply with all the physical and technical characteristics as per manufacturer specifications. After installation, the agency shall have to submit a 5-year warranty certificate to the department. The work shall include all the materials involved—labor, transportation, tools, tackles, etc.—all completed as directed by the engineer in charge.

a) 6mm Thick tile

Providing and fixing MS powder-coated telescopic channel and keyboard tray of M/s EBCO makes mouse pad trays with an attached mouse pad tray on the left or right side,with angle adjustment on mounting brackets to be fixed from the bottom of the table top using stainless steel screws, which can take a maximum weight of 12 kg, etc., all complete as directed by E I C.

Providing and supplying an MS powder-coated moveable stand unit with attached wheels and a soft pad for CPU units with a width adjustment of 130 to 230mm and a safe weight carrying capacity of 25 kg shall be made of M/s Ebco or equivalent, all as directed by EIC.

Providing and supplying a movable type powder coated 3 drawer steel pedestal of 390mm x 650mm x 590mm of Ms. Godrej make or equivalent, having a combination of drawer and filing drawers, a 10 lever Godrej cam lock, a steel front box file finish, castor wheels for movement, all in approved colour, all as directed by E I C.

Providing and supplying movable mid-back chairs of M/s. Featherlite or equivalent with adjustable height, armrests, lumber support, etc., with covering materials of leather or high-quality cloth, etc.

a) Product ID : Click MB Leatherette Fabric / Leatherette

Providing and fixing 15 mm thick pre-painted of approved shade densified edged eco friendly light weight calcium silicate false ceiling tiles of approved manufactureres of M/s. Aerolite with a texture of spintone/ cosmos/ spectra of size 595 x 595 mm in true horizontal level suspended on inter locking hot dipped galvanized steel sections with min Z12 (120g/sm) coating thickness,to inhibit red rusting as per manufacturers warranty (Framework grid shall be of M/s. Armstrong) of steel/ aluminium sections consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm from 0.33 mm thick (minimum) sheet spaced 1200mm centre to centre and cross ''T'' of size 24x28 mm made out of 0.33mm (Minimum) sheet, 1200 long spaced between main "T" at 600 mm centre to centre from a grid of 1200 x 600mm and secondary cross "T" of length 600 mm and size 24x28 mm made of 0.33 mmthick (Mimimum) sheet to be inter locked at middle of the1200 x 600mm panel to from grid of size 600x600mm, resting on periphery walls / partitions on a perimeter wall angle pre-coated steel of size (22x22x3000 mm made of 0.45 mmthick mimimum ) sheet with the help of rawl plugs at 450mm centre with 25mm long drive all screws @ 230 mm interval and laying 15mm thick densified edges calicum silicate ceiling tiles pre-painted of approved texture (Sprintone/Cosmos) in the grid including, wherever, required ,cutting /making opening for services like diffiusers, grills, light fittings, fixtures, smoke detectors etc. "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 6 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised level clips spaced at 1200 mm centre along main "T" bottom exposed with 24 mm of all T-sections shall bepre-painted with polyster baked paint all complete at all heights as per specifications drawings and as directed by the Engineer-In- Charge.

Providing & fixing 2 hr fire rated sandwitch panel of 105 mm thick made up of 2 nos. of 16mm bison panel having density of 1250 kg/cum sandwitched with 75mm thick rockwool having density of 43 kg/cum in between of 2 bison panels supported by framework of suitable size extruded anodized aluminium section at 600x600 at all floors & locations including fixing the panels to partition wall with necessary ss screws, forming grooves as required sizes making necessary openings/ cut outs around electrical fixtures A.C. grills & trap doors fixing to correct lines and levels with beading, scaffolding etc. & shall satisfy the fire rating criteria of I.S.O. 834-1975 and I.S. 3809-1979 for 1/2 hour to 4 hours fire rating as per complete all as directed bythe Engineer-in-Charge.

Providing and fixing fire doors with 2 hour fire rating conforming to IS: 3614 (Part 2), BS 476 (Parts 20 & 22), ISO 834 ; 45 mm thick fully flush, double skin door shell with lock seam joints at stile edges made from 1.25 mm thick galvanized steel sheet including door frames made from 1.6 mm thick galvanized steel sheet formed to double rebate profile of size 143 mm x 57mm as per manufacturer's instructions, door frames and shutter primed with Zinc Phosphate stoving Primer and finished with Polyurethane Aliphatic grade or epoxy paint including ironmongery consisting of stainless steel ball bearing butt hinges 3 mm thick fixed flush to the frame and shutter, full width horizontal handles (panic bar), concealed flush bolts, door closers, other standards fixtures and fasteners, all as directed by Engineer-In-charge etc. complete.

AMBIKA ENTERPRISE

AMBIKA ENTERPRISE