Procurement of Spare Parts of Grizzly Feeders, Wagon Tipplers and Water Pump of CHP-IV, STPS, Sarni.

Amount

Cardan Shaft Assembly (Series: 1550, Rect. Flange, Compressed Length: 870 M.M, Extended Length: 930 MM) for Grizzly Feeders; MOC: EN-19/709M40 BS:970

Drive Sheave for Grizzly Feeders; MOC: Cast Iron IS:210

Driven Sheave for Grizzly Feeders; MOC: Cast Iron IS:210

Helical Compression Springs (L.H Helix) for Grizzly Feeders; MOC: Spring Steel as per IS:3431

Helical Inner Springs. (R.H Helix) for Grizzly Feeders; MOC: Spring Steel as per IS:3431

Helical Gear – Left Hand Helux for Grizzly Feeders; MOC: EN-19

Helical Gear – Right Hand Helux for Grizzly Feeders; MOC: EN-19

Oil Flinger Disc cum Sleeve for Grizzly Feeders; MOC: Bronze

Set of Oil Flinger & Dust Flinger for Grizzly Feeders; MOC: Bronze

Set of Oil Housing for Gear End Cover & Drive End Cover for Grizzly Feeders; MOC: Bronze

Bearing Cartridge for Grizzly Feeders; MOC: IS:1030

Set of Bearing Retainer Ring for Gear End & Drive End for Grizzly Feeders; MOC: IS:2062

Set of Coupling Half (Gear End & Drive End) for Grizzly Feeders; MOC: EN-19/709M40 BS:970

Perforated Deck Assembly (01 Set = 05 Nos.) including Feed Deck for Grizzly Feeders; Thickness: 12 MM, MOC: SAILHARD/45C8 IS:1570

Breather Plugs: 1” BSP for Grizzly Feeders

Oil Level Gauge for Grizzly Feeders

Complete Set of Liners for Grizzly Feeders (01 Set = 20 Nos.); Thickness: 10 MM, MOC: SAILHARD/45C8 IS:1570

Cardan Shaft Guard for Grizzly Feeders; MOC: Cast Iron IS:2062

Belt Guard for Grizzly Feeders; MOC: Cast Iron IS:2062

Guide Shoe for Clamp Arm Bracket (Wagon Side) as per attached G.A drawing (1 Set = 6 Nos. i.e 1 Nos. for each clamp), MOC: Gun Metal

Guide Shoe for Clamp Arm Bracket (Bottom) as per attached G.A drawing (1 Set = 12 Nos. i.e 1 Nos. for each clamp) MOC: Gun Metal

Guide Shoe for Clamp Arm Bracket (Hopper Side) as per attached drawing (1 Set = 6 Nos. i.e 1 Nos. for each clamp) MOC: Gun Metal

Complete Set of Bush Bearings (1 for DE & 1 for NDE) for M/s Mather Platt make Horizontal Multistage Pump Model: ¾ HS Pluro x 5 CHR for HPMG System; MOC: Bronze & White Metal

Complete Set of Bush Bearings (1 for DE & 1 for NDE) for M/s Mather Platt make Horizontal Multistage Pump Model: 100/125 IPB x 5 CHR for Feed Water System; MOC: Bronze & White Metal

Complete Set of Bush Bearings (1 for DE & 1 for NDE) for M/s Mather Platt make Horizontal Multistage Pump Model: 100/125 IPB x 4 CHR for Stock Yard DS System; MOC: Bronze & White Metal

Track Wheel Shaft Assembly for Long Travel Assembly of Stacker Reclaimer; 01 set includes following items: (i) Drive Shaft with 2 Nos. Key – 1 No. (ii) Bearing with housing – 02 Nos. (iii) Lock Nut – 01 No. (iv) Lock Washer – 01 No. (v) Lock Plate – 01 No. (vi) Closed Cover – 01 No. (vii) Open Cover – 01 No. (viii) Spacer – 03 Nos.