REWIRING OF CERTAIN BLDGS AND CONNECTED ITEMS AT FORT AREA NAGPUR UNDER GE KAMPTEE.

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity and making good to disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade/PVC caping casing on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 4 above but one ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 4 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 4 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 4 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 4 above but one light point controlled by two - two way switches complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 10 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 10 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 10 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 10 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 10 above but one light point controlled by two - two way switches complete all as specified and directed.

All as per item No 10 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

All as per item No 10 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item No 18 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

S&F ceiling rose surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F bell ding dong, AC 230 volts, single phase complete all as specified and directed.

S&F lamp holder, insulated body with back plate for angle/ batten fitting complete all as specified and directed.

S&F modular switch, one way, 6A, 1 module complete all as specified and directed.

S&F modular switch, one way, 16A, 1 module complete all as specified and directed.

S&F modular switch, two way, 6A, 1 module complete all as specified and directed.

S&F modular bell push, 6A, 1 module complete all as specified and directed.

S&F electric bell ding dong, AC 230 volts, single phase complete all as specified and directed.

S&F modular socket, 6A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular fan step regulator,120 watt, 2 module complete all as specified and directed.

S&F MS AC plug box with modular plate power unit, four module, 20 Amps starter complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/surface, constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat No LCTLN-20-CDL/ Bajaj Cat No BLTRU 20W NW VIVA / Philips Cat No BN150W LED20S-6500 PSE OD GR.

S&F light fitting 9/10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable of suitable size of 230V, 50HZ complete all as specified and directed. Make:- CG cat part No LBHE-10-CDL or equivalent in Philips/ Wipro.

S&F fittings with surface mount LED down lighters 12W including driver with rated voltage 240 V, 50 Hz, complete all as specified and directed. Make:- CG Cat part No LCDEP-12-CDL or equivalent in Philips/ Wipro.

S&F energy efficient surface mounted 2'X2' grid ceiling LED fitting 36/40 W rated voltage 240V, 50Hz combination with profiled and flat diffuse complete all as specified and directed. Make:- CG Cat part No CCR-127--36-57-1SL-NWH or equivalent in Philips/ Wipro.

S&F LED batten fitting 2' length including drivers having energy consumption, 10/11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. Make:- CG Cat part No LCTLN-10-CDL or equivalent in Philips/ Wipro.

S&F building security light LED 25/30 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe) 0.8m bent to shape including FI clamps nut bolts etc complete all as specified and directed. Make:- CG Cat part No LST-25-CDL-M or equivalent in Philips/ Wipro.

S&F electronic LED driver with thermal, short circuit & overload protection for LED 2'x2' grid ceiling light 36/40 W with rated voltage 240 V, 50Hz, complete all as specified and directed.

S&F electronic LED driver with thermal, short circuit & overload protection for LED security light 18-20 W with rated voltage 240 V, 50Hz, complete all as specified and directed.

S&F electronic LED driver with thermal, short circuit & overload protection for LED down lighter 09/10 W with rated voltage 240 V, 50Hz, complete all as specified and directed.

M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with modular metal flush box with modular cover plate with frame 1/2 module complete all as specified and directed. Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item No 41 above but modular metal flush box with modular cover plate with frame 3 module complete all as specified and directed.

All as per item No 41 above but modular metal flush box with modular cover plate with frame 4 module complete all as specified and directed.

All as per item No 41 above but modular metal flush box with modular cover plate with frame 6 module complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts, 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure triple pole & neutral for 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt 40 to 63 amps 10 KA complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50mtr below the normal ground level connected to galvanized earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.36,105.00]

Vaidehi E Link

Sharma Electrical and Services

Chinmaya Enteprises

Rajapriyaconstruction

MVN Enterprises

Bidder Name

Sharma Electrical and Services

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link

MVN Enterprises

Rajapriyaconstruction