SMART PERIODICAL SERVICES TO CERTAIN MD ACCN AT ALBERT EKKA ENCLAVE AND OTM ACCN OF CERTAIN UNITS OF FLAMMING ARROW BDE AREA UNDER AGE BR II UNDER GE NAMS

Amount

Material and labour for complete removal of existing treatment, washing rubbing down, stopping and removal of existing treatment of old surfaces complete all as specified and directed.

Material and labour for applying one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having pressure of 3000 PSI +/- 20%. Complete all as specified and directed.

Material and labour for applying one coat of acrylic waterbased exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Completion of periodical services complete all as specified and directed.

Material and labour for applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat with fully automatic airless spray machine of having a pressure 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for Finishing walls with water based anti-algal 100% acrylic smooth exterior emulsion having silicon additives in two coats @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed. Note : There shall be a gap of 6-8 hours between appilication of 1st and 2nd coat. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for Applying 2 mm thick exterior wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed. Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services.

Material and labour for Prepration of old surfaces of walls, pillars cornices surfaces includinng scrapping down smoke ,soot,and efflorescent salts and treating oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and directed.

Material and labour for Preparation of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treating oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified and directed.

Material and labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

Material and labour for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour ) over one coat applied under Srl item No 9 above complete all as specified and directed.

Material and labour for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : old plaster surface (one coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on wooden surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

One coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

Material and labour for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, incl WPC @ 200ML per 50kg cement bag or as manufacture instruction complete all as specified and directed. Note- WPC will be measured and paid separately under appropriate items

Material and labour for 15mm thick cement plaster in cement motar (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, complete all as specified and directed

Material and labour for 5 mm thick cement plaster in cement motar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, complete all as specified and directed

Supply only water proofing compound complete all as specified and directed

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars over a coat of alkali resistant primer etc complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : New surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for damproofing to wall with two component Acrylic polym,er cementitious water proof elastomeric coating and apply with paint brush as first coat then applying second layer mix by brush to entire surface of container covering 0.6- 0.75 Sqm/ Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days. Note :- Quoted rate shall be deemed to be inclusive of materials all labour, tools and plants, scaffolding and working upto height 6 meter etc. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, with chicken wire mesh and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Chander Mohan Arora Contractor (BID ID -3499731)

M/s Vijay Construction Co. (BID ID -3505621)