Vikas Khand Pauli Mankupur main road se baghauda anusuchit basti se hote huye pitch road nirman karya

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Construction of Subgrade and Earthen Shoulder with approved soil with all lifts and leads, laying in layers, breaking clods, dressing to required lines, curves, grade and sections, watering and compaction to meet at least 100 % procter density complete to specification requirements as per Technical Specification Clause 303.1

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavater at OMC, and compacting with smooth wheeled roller to achieve the desired density as per clause 401(GSB Grade I)

WBM G-2 Providing and laying in width 3.75m and compacted thickness 7.50cm spreading and compacting stone aggregates of specific sizes to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening /binding materials to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grading -2. This work includes cost of all materials, labour, and hire charges of road roller, machinery, T&P etc complete. Complete work as per Technical Speicification Clause 405 (2) and as per direction of E/I.

WBM G-3 Providing, laying, spreading and compacting stone aggregates of specific sizes (53-22.4 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.

Brick edging on both side of road with first class brick 8 cm. (3'') wide 12cm. (4.50'') deep laid with mud mortar including all materials, labour,T&P etc.complete. complete as per PWD detailed specification No.-20.15 as per SOR No-765

Providing and applying Primer coat with bitumen emulsion (SS1) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.85 kg / sqm using mechanical means. Complete work as per technical specification clause 502 of MORD

Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepaired bituminous surface cleaned with Hydraulic broom as per Technical Speicification Clause 503 MORD

Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 to 5.6 mm aggregates either using penetration grade bitumen (VG-10) to required line grade and level to serve as wearing coarse on a previously Prepared base, including mixing in a suitable plant (HMP 30/40 t per hour), laying and rolling with a three wheel 80-100kN static roller capacity finished to required lavel and grades to be followed by seal coat as per MORD Techincal Specification clause 508.