REPAIR/MAINT OF AREA DRAINS, CULVERTS, PATH, HARD STANDING AND CLEANIG OF SEWAGE LINES, SEPTIC TANKS ETC IN TECH AREA GWALIOR

Amount

Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 2 here-in-before but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.

M&L for stone walling of random rubble masonry uncourse, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

All as per item No 4 here-in-before but, except stone complete all as specified and directed. (Note :- Old retrieved stones obtained from demolition in serviceable condition shall be used in the work).

M&L for 15mm thick rendering on fair face of brick walls in CM (1:6) surface finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash all as specified and as directed .

M&L for preparation of old plastered surfaces of walls and applying one coats of white wash including complete removal of existing surfaces all as specified and as directed .

M&L for flush pointing to random rubble masonry/stone walling in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) ground floors and pavings of any description and in any position n. exc 15 cm thick below or above G.L including removing and disposal complete all as specified and directed .

M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in path/sub base etc complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in Plinth protection and finishing the surface even and fair complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in surface channel etc complete all as specified made to shape and size as directed.

M&L for PCC (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.

Extra for forming fair finish drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stooped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:4 complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair complete all as specified and directed.

M&L for 15mm thick rendering on fair face of brick walls in CM (1:4) surface finished even and fair including Taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc and prepared to the plaster complete all as specified and directed.

M&L for 600mm bore reinforced concrete pipes class NP-2 ,laid and jointed complete with collars complete all as specified and directed including dimantling of old RCC pipe& necessary excavation.

M&L for concrete bed to drain pipe incl packing under and completely surrounding pipes with cement concrete 1:3:6 mix,type C-2(using 40mm geaded stone aggregate)complete all as specified and directed.

Demollition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for complete all as specifeid and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded aggregate) as in shelves, cover slabs for manholes/drains etc set in cement mortar (1:6) including necessary form work etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately) under appropriate item of Sch ‘A’/BOQ.

S&F mild steel TMT bars of 8-10 mm dia cut to length, bent to shape as required including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for securing with clips complete all as specified and directed.

M&L for desilting/removing of earth deposits from the drains/nallahas / trenches etc of any description & in any position, getting out and disposal of earth including removal/kept aside and refixing in the same position after cleaning of drain/nallahcomplete all as specified and as directed. (Note:- Nature of silt/earth deposits in the drains/nallahas is soft/ loose and sandy soil).

M&L for 10mm thick Endura designer tiles of size n.exc 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors complete all as specified and directed by Engr-in-Charge.

Demolition of stone slabs and paver tiles of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 60 mm thickness Machine pressed precast conctete interlocking paver block any shape and size of M-35 Grade confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed. Make :- ISI Marked as approved by GE

All as per item No 29 above but except paver block complete all as specified and directed.

M&L for Sand filling under floors to receive interlocking paver blocks incl consolidation complete all as specified and as directed.

Dismantling posts or struts (Wood, steel, or RCC) any section, including taking out embeded portion and making good distrubed ground, including any type fencing all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation, boundary pillars, post incl caps & base etc complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for MS work as in swan neck / brackets etc for fencing post & strut in fencing etc including cutting tops to shape as directed, drilling holes, riveting for wires etc including all necessary drilled bolting or riveting, MS Flat iron etc and similar work conforming to Fe290 Gde E-165 complete all as specified and directed.

S & F in repair galvanized 2 stranded steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any type of standard hooks, including securing and tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and directed.

Tightening /restraining and resecuring of old existing barbed wire including making good staples etc in same position complete all as specified and directed .

Supply only Chain link MS galvanised 4mm dia (wt. not less than 4kg) fencing any size or type all as specified and directed .

Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.

S&F in repair of concertina coil size exc 600 mm in one rows between the double layer fencing including all fixing arrangement complete all as specified and directed .

Removing of concertina coil any size and any type in any position and refixig in the same position etc complete all as specified and directed .

M&L for Preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for Preparing New steel & iron surfaces of any description n.exc over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

M&L in repairs of Running welding exc 6mm thick welded metal etc complete all as specified and as directed .

GWALIOR TRADE LINK

Sunil Traders

m/s vikash Engineers

M/s. Ravi and brothers

MOHAN SINGH BHADORIA

M/s Kishan Construction Company

M/s Anjali Construction

M/S KRISHNA KAVYANSH BROTHERS