Extension of AHO Building at Mohana in Gajapati District

Dismantling brick or stone masonry in cement mortar under3.0m height including stacking the useful materials - First floor

Dismantling and removing R.C.C.columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m - First floor

Dismantling & removing doors ,windows and ventilators including removal of frames ,hinges etc - First floor

Brick work with FA bricks inC.M(1:6) in Super structure 1st Floor

RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for 1st floor

(a) Column and beam

(b) Lintel

(c) Sun shade, loft and Chajja

(d) Roof slab

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in first floor

6mm thick cement plaster in C.M(1:4)R CC surfaces for First floor (inside)

16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in first floor

12 mm thick cement plaster in c.m(1:6) over brick masonry, outside walls first floor

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work in first floor

Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Vitrified tiles in Ground Floor

Fitting tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Vitrified tiles Vitrified tiles in Ground Floor

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855

Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation.

Priming one coat with any approved red oxide over steel work GF

Painting 2coats with any approved iron paint on new iron work. GF

Supplying fitting and fixing of FRP door frame including drilling holes in Masonry walls

Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick,Laminated with GRP skins with wood grain finished fabricates using UV stabilised Isopthalic Gel Coat and layer of 450gsm E-glass chopped strand mat(csm) impregnated with Orthopathalic,Polyster resin including fitting all fixtures like hings,towerbolt,handle,aldrop with cost,conveyance and taxes of all materials and labour complete

Resin based chemical compound of approved manuefacturer for jointing old and new concrete

Internal Electrification

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) (Cost for 1 point)

Group-A

Group-B

Recessed wiring to sub-main in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth as required. (Make of wire Finolex/L&T/Anchor/Havells/VGuard) (Cost for 50 m)

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. (3 pin 5 / 6 amp socket outlet)

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. ( 6 pin 15 / 16 amp socket outlet)

Labour for fixing fan hooks in existing R.C. ceiling

Installation,Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5sq.mm FR PVC insulated single core multistrand copper conductor,earthing the regulator as required.

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories etc

25W Tube Light

Please Enable Macros to View BoQ information