Construction of Jal Shakti Vibhag Sub Division office building Jalog Tehsil Suni Distt Shimla HP

Amount

Description of item

Cutting in Earth Work in all Kind of Siol In Pick Jumper Work

Excavation in foundations, trenches etc. in earth work, lift up to 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. clear from the as of excavation and then returning the excavated soil in 15 cm. layers when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs.- P-J Work.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering & shuttering in foundation and plinth.

R/R stone masonry/ Polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1Cement : 6 Sand).

Providing and laying cement concr!e 1:1.5:3 ( 1 cement:1.5 sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:-

For Foundation & Plinth

Column

Suspended Floor

Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels.

Brick Work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 sand) First class bricks.

Half brick masonry in common burnt clay building bricks in : cement mortar 1:4 (1 cement : 4 sand) first class brick in super-structure.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in :

Vertical surface such as wall ( any thickness )

Flat surfaces such as soffits and suspended floors, roofs , landing and the like:-

Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level.

Providing wood work in frames of doors, windows, clearstory, windows and other frames wrought, framed and fixed in position: 2nd class deodar wood

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows & clearestory windows i/c black enamelled iron butt hinges with necessary screws: 40 mm thick 2nd class deodar wood

Providing and fixing Wire gauge shutters using galvanized M.S Wire gauge of I.S Gauge designation 85 G with wire of dia 0.56 m.m for door windows and clearstory windows i/c black enamelled iron butt hinges with necessary screws: 40 m.m thick 2nd class deodar wood.

P/F M.S Grills of required pattern in wooden frames of windows etc. with M.S. flats, Square or round bars with round headed bolts and nuts or by the screws ( Plain Grill )

15 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor to level i/c arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in c:m 1:3 (1 cement : 3 sand).

6 m.m Cement plaster to ceiling ( a) in C:M 1:3 ( 1 Cement :3 Sand )

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting. Ready mixed paint brushing with white wood primer pink.

Painting two coats ( Excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning oil, grease, dirt, dust and other foreign matter sand papering and stopping:- Ready mixed paint other than white.

Applying Birla White wall care Putty over plaster surface after throughly brushing the surface free from mortar drops , dust , loose , materails and other to give matters sand parpered smooth to give final matter finish to the surface complete .

Providing 40X3 Flat iron hold fast 40cm long i/c fixing to frame with 10m.m dia bolts nut and wooden pugs and embedded in cement conc. Block 30x10x15 (1 cement: 3 sand:6 graded stone aggregate 20mm nominal size).

P/F anodized aluminium sliding door bolts and nuts screws etc. complete

P/F anodized aluminium tower bolt anodized transparent or dyed to required shade and colour with screws etc. complete

P/F anodized aluminium Handles anodized transparent or dyed to required shade and colour with screws etc. complete.

P/F Oxidized M.S. hooks and eyes

Boulder filling dry hand packed tightly as in wire crate apron bund ( Wire crate to be measured separately)

40 mm thick cement conc. Flooring 1:2:4 ( 1 cement : 2 sand : 4 graded stone agg. 20 m.m nominal size) laid in one layer finished with a floating coat of neat cement.

White Glazed tiles 6 mm thick in flooring , treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 finished with flush pointing in white cement.

Providing and laying cement concrete 1:5:10 (1Cement:5Sand:10 graded stone aggregate, 40 mm nominal size) with15% plum and curing complete excluding cost of form work in retaining walls/breast walls, the size of plums shall usually be 150 mm to 300 mm as per HPPWD Specification.

Add 6.25% Sanitary fitting & Electric fitting for building

M/S VERMA CONSTRUCTION

A.S.Builders