SPL REPAIR OF LT UG CABLE AT GD POST IN 102 AMN POINT AT SUNDERBANI INCLUDING PROVN OF LIGHT POLES AT 10 ROU AT AKHNOOR INCL LIGHTNING CONDUCTOR OF AVN SQN ALONGWITH GEYSER CEILING EXHAUST FANS AT 410 FD HOSP UNDER GE N AKHNOOR

Amount

Steel tubular swaged pole type 410 SP-31 (9 metre long) with CI base plate and including one coat of red oxide chrome primer and two coats of Aluminium paint on surfaces exposed to view and making 30cm wide strips (Total 5 Nos) with yellow and black paint alternately on external surfaces above PCC benching including numbering with black paint and painting with bituminous paint externally complete for portion embedded in PCC all as specified and directed.

LED street light fitting 70 watt 230 AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and laying and testing LT cable XLPE 1100 Volt grade 16 Sqmm 4 core with stranded aluminium conductor PVC sheathed armoured laid in trenches/along poles/through pipe/through duct complete all as specified and as directed.

Supply and fixing and testing weather proof flat three Core PVC insulated & sheathed Copper stranded conductor cables 1.5 sqmm drawn through street light pole duly making the hole upper and down both place and connection the street light to DB Box all as specified and directed.

GI pipe 15mm bore light grade for protection of cable including fixing along pole complete all as specified and directed.

Bracket made out of 40mm x 5mm Angle iron 1.5 metre long and both end hole for fixing of street light including S & F for MS clamps, back plates fabricated from structural steel section 50 x 6mm, including nuts, bolts, washers, welding cold or hot, drilling of holes for bolts, in any shape or size including two coats of aluminium paint over a coat of Red oxide primer after preparation of steel surfaces complete all as specified and directed.

Loop In and Loop Out Box pole mounted out door type Hot press Moulded SMC Junction Box of inside dimension not less than 300x300x150mm and outer dimension of 400x400x200mm with locking arrangement suitable for 240 V, 50 Hz including MCB SP of 6 Amp cap, fixing with 4/2 Nos Aluminium busbar of 30 Amp rating for Three/single phase with neutral, painted with powder coating in siemens grey colour including clamp for fixing with steel pole all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation laying cable including getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Protection to cable with one layer of brick laid flat across the cable using old size sub class 'B' Bricks all as specified and directed.

Sand cushioning to under ground electric cables including watering and consolidation all as specified and directed. Note: For payment purpose, only punned thickness shall be measured)

Plain cement concrete1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in pole coping complete including necessary from work all as specified and directed.

Taking down burnt cable and supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 70 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Taking down burnt cable and supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 95 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Taking down burnt cable and Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 120 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Material, Labour for Earthing complete with steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connecting to the Galvanised iron earthstrip 32x6mm dia, by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 20 mm bore incl provision of concrete pit made from PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 17mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape Gl medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm Fl with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs, all as per electrical plate No 5 of SSR- Part I connected to earth test point incl taking down old earthing compllete all as specified and directed.

S&F of 40mm bore of tubes 'light grade' galvanised with all fittings and fixed complete with electric pole, laid in trenches for passing of XLPE cable complete all as specified and directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of copper strip 32x 6mm with saddles/insulator and fixing screws etc for down conductor fixed in walls forming ring conductor or joining with earthing strip upto test point complete all as specified and directed.

Supply and fixing of aluminium strip 25 x 3.00mm with saddles and fixing screws etc. for roof conductors ans down conductors above ground complete, all as specified and directed.

Supply and fixing of GI Tubes, 'Medium grade' 40mm dia galvanised, with all fitting and fixed on roof complete to walls and ceilings or laid in floors all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone agg) Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. Kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stonewalling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

Test point terminal block made of Gun Metal or phosphorus bronze of size 75 x 75 x 25 mm drilled & screwed including 03 Nos 8mm dia 25mm long hexagonal head screw including taking out all broken test point terminals from any position and any places, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and approved. Note: Old unserviceable ceiling fan shall be deposited to MES store yard.

Supply and fix Exhaust fan 300mm sweep metal body industrial type heavy duty electrical operated, AC, 50Hz, ISI marked, 900 rpm, IP-55 complete accessories including louvers and necessary fixing arrangements such as nuts, bolts & washers and connecting PVC sheathed copper conductor cable of size three core, 1.0 sqmm from ceiling rose to exhaust fan connector complete all as specified and approved. Note: Old unsv exhausfan will be deposited to MES Yard.

Supply and fix electric water heater, storage type steel body and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and approved Note: Old unsv geyser will be deposited to MES yard)

M/s Chopra Constructions (BID ID -3487595)

MEELU ENTERPRISES (BID ID -3493289)

M/s Rajesh Kumar Contractor (BID ID -3487899)

M/S JIWAN SINGH (BID ID -3491444)

VEER SINGH CONSTRUCTION (BID ID -3491686)

M/S AKHILESHWAR ASSOCIATES (BID ID -3486998)