REPAIR TO ALL TYPE OF HOSPITAL FURNITURE UNDER GE WEST LUCKNOW

Amount

COUCH EXAMINATION DRG NO FD-122: (For Item No 1 to 8 )

Taking out old unserviceable Rexene cloth, Hessian cloth, Dunlop foam, coir fibre/cotton layers for side and lower planks and Supply and fixing new Rexene cloth, Hessian cloth, coir fibre and 12 mm thick cotton layer and 25 mm thick Dunlop Pillo of 32 density and covered with UPHOLSTRY (Leatherite) cloth complete with and including replacement of damaged spring and damaged planks of 1st class teak wood where ever required complete all as specified and as shown on drgs. Note : Wooden plank and spring shall be measured and paid separetely. Make of foam : Sleep Well/Curlon/COCO foam

Supply only planks 1 st class teak wood 12 mm thick complete all as specified and as shown on drgs.

Supply only spring required for Couch Examination complete all as specified and as shown on drgs..

Taking down old unserviceable leg and Supply and fixing new leg of MS Square pipe 25 mm having 1.6mm wall thickness duly painted with two coat of synthetic enamel paint over a coat of red oxcide primer of any tint including necessary welding to stiffners, and painted over a coat of red oxide primercomplete all as specified and as shown on drgs.

All as item ser No, 4 but centre stiffner. Size-25mm square tube steel including welding to leg complete all as specified and rest all as per drg.

All as item ser No, 4 but side stiffner. Size-25mm square tube steel including welding to leg complete all as specified and rest all as per drg.

Taking down old damaged/ broken hard rubber shoe and Supply and fixing new hard rubber shoe of approved quality complete all as specified and as directed.

Taking out old unserviceable drawers and supply and fixing new drawers complete with knob as per existing size and shape after de-rusting , preparation , denting of deshaped portion and painting with two coats of synthetic enamel OG paint complete all as specified and as shown on drg .

DESK SCHOOL TYPE 'A' DESK ADULT, DESK 4X6 :DRG NO FD-107& 124: (For Items No 9 to 18)

Taking down U/S 19 mm thick back plank of box and S&F 19MM Plank made 1st class hard wood teak (MP teak) free from knoss, cracks etc. with permissible moisture contents as per the shape and size as exists complete all as specified and as shown drg.

All as per items No 9 but side plank. Size-19mm thick 370 x 140mm complete all as specified and as shown on drg .

All as per items No 9 but Top/Bottom plank. 19mm thick 365 x 800 mm complete all as specified and as shown on drg .

Taking down U/S legs and supply and fixing legs of 25mm tube legs size as exists complete all as specified and as shown drg and painted over a coat of red oxide primer.

All as per items No 12 but Tube Foot Rest. Size-25mm square tube steel complete all as specified and as shown on drg and painted with a coat of red oxide primer .

Taking down old U/S rubber shoe and S/F new hard rubber shoe complete rest as per drg complete as per the shape and size as exists complete all as specified and as on shown drg.

Taking out existing unserviceable block board from Desk school and provide new block board of size 800x455x19 mm thick and screwed to fix complete all as per drg.

Taking out unserviceable sides of block board from Desk school and supply & fix new sides of block board of size 380 x 140 x 19 mm thick . Complete rest all as per drg.

Taking out unserviceable partition from Desk school & S&F in partition made out of block board of size 370x120x19 mm thick. Complete rest all as per drg.

Removal of denting of deshaped portion desk fram and panting with two coats of synthetic enamel 0G paint complete all as specified and as shown drg.

RACK PIGEON HOLES (STEEL)/ALMIRAH PIGEON HOLES: DRG NO FD-1037 (For Items No 19 to 23)

Taking down 1mm thick MS Sheet from any portion of rack Pigeon Hole steel and SF new 1MM thick MS Sheet as per the shape and size as exists for LHS and RHS of Pigeon hole steel and apply one coat of refd oxide priomer complete all as per drg.

Taking out existing damaged MS sheet from Top of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet duly painted with one coat of red oxide primer complete all as per drg.

Taking out existing damaged MS sheet from back of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet duly painted with one coat of red oxide primer complete all as per drg.

Taking down U/S legs of Angle Iron and S/F new leg made out angle iron 40X40X4MM thick Angle iron welded to 1mm thick M/S sheet all as specified and as shown drg and painted with one coat of red oxide Primer complete all as specified and as shown on drg.

Removal of denting for the deshaped portion of rack pigen holes (steel) cleaning of rusted surface with including parts/item repaired/replaced under item 19 to 22 above including preparation of patched by applying putty over two coats of paint grey/olive green systhetic enamed on the external surfaces and hammertone/olive green synthetic enamel on the external surfaces by spray gun complete all as specified and as shown on drg.

RACK 3 TIER: DRG NO FD-1039 (For Items No 24 to 29)

Taking out US shelves and S&F new shelves made of 20 gauge thick MS sheet of existing size as per drawing duly painting with one coat of red oxide primer all as to match with existing surface.

Taking down old U/S leg and S&F new leg of required size as shown on drg duly painting with one coat of red oxide primer complete all as directed by Engr-in-Charge.

Taking out US side sheet and S&F new side sheet made of 20 gauge MS plain sheet of size as shown on drawing duly painting with one coat of red oxide primer.

Taking out US top of rack sheet and S&F new top of rack sheet made out of 20 gauge MS plain sheet of size as shown on drawing complete with one coat of red oxide primer.

Taking out Us back side of rack sheet and S&F new back side of rack sheet made out of 20 gauge MS plain sheet of size as shown on drawing complete with one coat of red oxide primer.

Removal of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paper of rack side (Steel) cleaning of rusted surface with including parts/item repaired/replaced under item 24 to 28 above including preparation of patched by applying putty to coats of paint grey/olive green systhetic enamed on the external surfaces and hammertone/olive green synthetic enamel on the external surfaces by spray gun over a coot of primer complete all as specified and as shown on drg.

RACK 6 TIER : DRG NO FD-1038: (For Items No 30 to 39)

S&F new shelves made out of 20 gauge thick MS sheet of existing size as per drawing duly painting with one coat of red oxide primer complete.

Taking out existing damaged MS sheet from Top of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet duly painted with one coat of red oxide primer complete all as per drg.

Taking out existing damaged MS sheet from back of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet duly painted with one coat of red oxide primer complete all as per drg.

Taking down old U/S leg and S&F new leg made out of 40x40x4 mm angle iron of required size and shown on drg duly painted with one coat of red oxide primer all as directed by Engr-in-Charge.

Taking out US sheet from LHS or RHS of rack 6 tier and S&F new side sheet made of 20 gauge MS plain sheet of size as shown on drawing including one coat painting with red oxide primer.

Removal of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paper of rack side (Steel) cleaning of rusted surface with including parts/item repaired/replaced under item 30 to 38 above including preparation of patched by applying putty two coats and painted with grey/olive green systhetic enamed on the external surfaces and hammertone/olive green synthetic enamel on the external surfaces by spray gun complete all as specified and as shown on drg.

SCREEN MOVEABLE TUBLER STEEL WITH CLOTH: DRG NO FD-83 (For Items No 40 to 45)

Taking out old caster wheel and S&F new caster wheel 50mm dia complete as shown in drg and as directed at site.

Taking out old U/S legs and S&F new legs of 25 mm dia MS tube complete as shown in drg and as directed at site (Appx length 0.25 meter welded with 25 mm dia MS tube pipe complete with one coat of red oxide primer)

Taking out old U/Sbottom rail and S&F bottom rail of 25 mm tube complete as shown in drg complete with one coat of red oxide primer) and as directed.(2.15 Mtr)

Taking out old Hook and S&F new GI Hook complete as shown in drg and as directed.

Taking down old U/S cloth and S&F new curtain cloth green colour of approved quality duly stitched at both rails and comprising 03 Nos in a set of size 136 x 111cm one number and 136 x 54 cm two Nos with cloth hanging spring complete as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc and a coat of red oxide primer wherever equired and applying two coat of synthetic enamel paint white as required shed by spray gun on all steel surfaces complete as directed .

STOOL STEEL 305X305X510 MM (For Items No 46 to 49)

Taking out old rusted legs and S&F new legs made of 16 gauge MS sheet painted with one coat of red oxide primer complete as per drg and as directed.

Taking out old rusted stiffeners and S&F new stiffeners made of 16 gauge MS sheet complete as per drg and as directed at site with and including one coat of red oxide primer.

Taking out old unserviceable top and S&F new top 16 gauge MS sheet size and shape as per drg and applying one coat of red oxide primer.

M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper, derusting, cleaning of rusted surfaces including preparation of patches by applying putty etc wherever required and applying two coats of olive green synthetic enamel paint by spray gun on internal & external surfaces complete all as specified and shown on drg.

TABLE BED SIDE STEEL : DRG NO HFD-2005/FD-133(M) & TP Godrej (For Items No 50 to 59)

M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surface and sand papering inside and outside including preparation of patches by applying putty and a coat of red oxide primer and applying two coats of synthetic enamel paint white with spray gun all as specified and shown on drg.

Taking out worn out legs and S&F new legs made of 25 mm dia 1.6 mm thick MS tube 150 mm long and painted with one coat of red oxide Primer complete all as specified and as shown on drg..

Taking out old worn out long rail and S&F new long rail made of 20 mm dia and 1.6 mm thick MS tube 500 mm long and painted with one coat of red oxide Primer complete all as specified and as shown on drg..

Taking out old worn out short rail and S&F new short rail made of 20 mm dia and 1.6 mm thick MS tube 300 mm long and painted with one coat of red oxide Primer complete all as specified and as shown on drg.

Taking out unserviceable handle and S&F new mild steel chromium plated handle of same as shown in drg and as directed and painted with one coat of red oxide Primer complete all as specified and as shown on drg.

Taking out old unserviceable hinges and S&F new hinges as per existing table bed side steel complete as directed.

Taking out unserviceable top and S&F new top of size 600x380 made of premlaminated particle board 18/19mm thick exterior grade both side laminated one side teak face other side white balancing bonded with BWP type phenol formaldehyde synthetic resin as per IS-12823 ISI marked and around with 6mm teak wood beading all around top and fitted with steel screw to frame of steel table as shown on Drg.

Taking out unserviceable top and S&F new steel top made of 20 gauge thick plain MS sheet duly painted with white synthetic enamel paint over a coat of red oxide to match with existing surface compelete all as shown on drg..

Taking out unserviceable shutter and S&F new shutter made of 20 gauge thick plain MS sheet duly painted with white synthetic enamel paint over a coat of red oxide to match with existing surface compelete all as shown on drg.

Taking down and U/S hard rubber shoe and S&F new hard rubber shoe all as specified and shown on drg.

STEP STEEL (2&3 TIERS)DRG NO FD-13 (For Items No 60 to 64)

Taking ot old U/S sheet from step and S&F new sheet made out of 18 gauge MS sheet of size 460x230mm with size & shape as exists and welded with frame and painted with one coat of red oxide Primer complete all as specified and as shown on drg.

Taking down old U/S back legs and S/F new back side legs of 18 gauge 22.5 dia tube shape as exists and painted with one coat of red oxide Primer complete all as specified and as shown on drg.

All as per item No 57 (b) above but front side leg of hight not more than 150 mm.

Taking down old U/S castore and S/F castore wheel without rubber for front legs only exists complete all as specified and as shown on drg.

M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surface and sand papering inside and outside including preparation of patches by applying putty and applying two coats of synthetic enamel paint white with spray gun complete all as specified and shown on drg.

TABLE INVALID DRG NO FD-131(For Items No 65 to 68)

Taking down old U/S stanless steel top and S/F 18 gauge stanless steel size shape as exists duly painted with a coat of red oxide primer complete all as specified and as shown on drgs.1070x460x1 mm thick.

Taking down old U/S legs and S/F new legs made of 25mm dia 20 gauge steel tube shape and size as exists duly painted with a coat of red oxide primercomplete all as specified and as shown on drgs.

Taking down old U/S ball bearing and S&F 50mm dia ball bearing rubbers castors oven baked finish all as specified and as shown on drg.

M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc and and applying two coat of synthetic enamel paint white by spray gun on all steel surfaces over a coat of red oxide complete specified and shown on drg.

TROLLEY HOT FOOD: DRG NO FD-133 (For Items No 69 to 73)

Element and S/F new tubular Element Voltage 1250 volts 230/AC DC all as specified and as shown on drg.

Taking down old U/S rotary switch and S/F multistage rotary switch for heat control All as specified and as shown on drg.

Taking down old glass wool and S/F new glass wool on heating chamber, all as shape shown as specified drg.

Taking down old U/S stainless steel food vessal and S/F new stanless steel food vessed of 200mm dia, wide and 200 did, Deep with lead with deep setting wids all as shown on specified and as shown on drg.

Taking down old U/S ball bearing and S/F heavy duty ball bearing type 200 dia rubber wheel collapseable counter 390x500. All as specified and as shown on drg.

TROLLY SOILED LINEN SIGNLE AND DOUBLE UNIT.DRG NO FD-132 (For Items No 74 to 79)

Taking down old U/S canvas bag and S/F canvas bag as per size and shape exists complete as on shown and as specified on drg.

Taking down old U/S bottom frame and S/F new bottom frame made out of 19mm circular tube bottom fram complete all asspecified and shown on drg duly painted with one coat of red oxide primer.

Taking down old U/S legs and S/F new legs made out of 19mm circular tube legs complete all asspecified and shown on drg duly painted with one coat of red oxide primer.

Taking down old U/S stiftener and S/F new stiffner made out of 19 mm tube stifftener and painted with one coat of red oxide primer.

Taking down old U/S castor wheel and S/F new 50 dia castor wheel complete all as shown on drg.

M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc and two coat of synthetic enamel paint white and as required shed by spray gun on all steel surfaces complete as directed.

PATIENT TROLLY STRUCTURE (TP) (For Items No 80 to 82)

Taking down old U/S stainles steel strucher top and S/F 1mm stainless steel top design complete all as specifed and as shown on drg.

Taking down side U/S ball bearing and S/F heavy duty bass bearing 75 dia rubber wheel callapsable . All as specified and as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surfaces and scraping of complete old paint by paint remover OR sand paper by including preparation of patches by applying putty etc wherever required and applying two coat of synthetic enamel paint white as required shed by spray gun on all steel surfaces complete as directed .

TABLE LABORATORY:FD-140 (For Items No 83 to 91)

Stainles steel sheet from top of table and S/F new Stainles steel sheet as per exists shape and size complete as on specified as on show drg of size 3'x12'x1mm thick with one coat of red oxide primer and 2 coat of SE paint.

Taking down old U/S block board and S/F 19mm thick block board of size 3'x4'x12' BWR grade ISI Mark 303-1885 with shape and size complete all as specified and as shown on drg.

Taking down old U/S front drawer and S/F new front drawer and drawer made out of block board with teak veneer one side and block board requred for one drawer 2x370x260mm complete with size and shape exists all as complete as on specified as on shown on drg.

Taking down old U/S shutter and S/F new shutter with size and shape exists complete as on specified and shown on drg .

Taking down old U/S top rail and S/F top rail of size 660x50x25mm made of 1st class hard wood teak (MP) free form knots craks etc. with permissible moiste contents comlete all as specified and shown on drg.

All as above but item No 86 stiffner of size 800x50x25mm. Complete all as specified and shown on drg.

All as above but item No 86 legs size 100x50x50mm. Complete all as specified and shown on drg.

All as above but item No 86 side stiffer 760x50x25mm. Complete all as specified and shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of French polishing to table laboratory, with and including to the parts repaired/replaced under item No. 86 to 90 to the required gloss to match with the existing complete all as specified and as shown on drgs.

TABLE PREPARATORY SS TOP DRG NO :TP (For Items No 92 to 95)

Taking down old U/S stailes steel top and S/F 1mm thick stainles steel top of table preparatory with size and shape exists all as complete as on specified as on show on drg.

Taking down old U/S Legs and S/F 25mm tube legs with shape and size and shape exists and applying one coat of red oxide primer all as complete as on specified as on show on drg.

Taking down old U/S top fram and S/F 25mm tube fram with shape and size and shape exists and applying one coat of red oxide primer all as complete as on specified as on show on drg.

Remove of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paper of table preparatory cleaning of rusted surface with including parts/items repaired/replaced under item No 92 to 94 above including preparation of patches by applying putty two and painting with two coats of synthetic enamel paint white on the table preparatory fram by spray complete all as specified and as shown on drg.

THREE SEATED STEEL CHAIR POWDER COATED(TP) (For Items No 96 to 97)

Taking down old U/S sheet from chair and S/F new sheet of steel chair made out of MS Sheet duly painted with 2 coat of synthetic enamel paint powder coated size and shape exists complete all as specified and as shown on drg.

Taking down old U/S legs and S/F new legs for three seater steel chair powder coated MS sheet duly painted with 2 coat of synthetic enalmel white paint size shap exists complete as on specified and as shown on drg.

LOCKER BED SIDE STEEL : DRG NO FD-257 & 1029 (For Items NO 98 to 105)

Taking down /out old unserviceable handle and Supply and fixing new chromium plate handle goderaj pattern , 100mm long complete all as specified and as shown on drg .

Taking out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. Make of lock Harison/Godrej.

Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple ,100mm size complete all as specified and as shown on drg .

Taking down /out old worn out legs and Supply and fixing nre legs made out of 16 gauge MS sheet with size & shape as exists complete all as specified and as shown on drg and applying one coat of red oxide primer.

Taking down /out old U/S drawer and Supply and fixing of drawer made of 16 gauge MS sheet with size & shape as exists and painted with one coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick shape and size and painted with one coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size and painted with one coat of red oxide primer complete all as specified and as shown on drg . (locker bed side steel)

Removal of denting of the deshaped portion and scraping of complete old paint by paint remover OR sand paper of locker steel ,cleaning of rusted surfaces with & including parts/item repaired/replaced under item No 98 to 104 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green synthetic enamel on the internal surfaces and hammer tex/Olive green synthetic enamel on the external surfaces by spray gun complete all as specified and as shown on drg .

ALMIRAH STEEL LARGE / MEDIUM WITH SHELF , 1/2 HANGING 1/2 SHELVES /ALMIRAH GLAZED STEEL AND ALMIRAH FOR MAP STEEL: DRG NO FD- 1031,1032,1033 &1030(For Items No 106 to 117)

Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long Godrej Pattern complete all as specified and as shown on drg .

Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock Godrej pattern complete all as specified and as shown on drg. Make of lock Harison/Godrej.

Taking down old shelves with cleats incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position after repair complete all as specified and as shown on drg .

Taking down/out old lock cover and Supply and fixing new new lock cover made of 16 gauge MS sheet with one coat of red oxide primer complete all as specified and as shown on drg .

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet with one coat of red oxide primer complete all as specified and as shown on drg .

Taking down old unserviceable hanging rod and Supply and fixing hanging rod 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg .

Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick and painted with one coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size with one coat of red oxide primer complete all as specified and as shown on drg . (Almirah Large)

Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size with one coat of red oxide primer complete all as specified and as shown on drg . (Almirah Small/Med)

Removal of denting for the deshaped portion of almirah large, almirah 1/2 Hanging 1/2 Shelf & Almirah glazed/steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 106 to 114 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green synthetic enamel on the internal surfaces and hammer tex /Olive green synthetic enamel on the external surfaces by spray gun complete all as specified and as shown on drg.

All as per serial item No 130 above but Almirah small/medium with shelves.

Taking down old unserviceable glass panes of almirah glazed steel and Supply and fixing glass panes of 5 mm thick of size as exists complete all as specified and as shown on drg .

Supreme Builders

RAGHUVANSH TRADERS

Shivam Enterprises

SANDEEP ASSOCIATES